AnyCubic Kobra 3 Combo! First look and Assembly

AnyCubic Kobra 3 Combo! First look and Assembly | Multicolour 3D Printing!

Рет қаралды 21,440

Күн бұрын

Join us for an exciting first look and assembly of the AnyCubic Kobra 3 Combo! Dive into the world of multicolor 3D printing as we unbox, set up, and test this innovative printer. Discover its features and capabilities. Whether you're a seasoned pro or new to 3D printing, this video will give you a comprehensive overview of what the Kobra 3 Combo can do!
Visit our website: bit.ly/3y7VWaK
Contact us: bit.ly/4dwSTZL
Join our 3D printing community Facebook group: / 1233dprintinguk
Have you heard of 123-3D.co.uk?
We offer a huge range of affordable 3D printing supplies to the UK consumer at the best possible prices. If you have any questions about 3D printing or a product that we sell do not hesitate to contact our customer service team - www.123-3d.co.uk/page/help.html
Did you also know that we have European partners.
UK: www.123-3d.co.uk
Netherlands: www.123-3d.nl
Sweden: www.123-3d.se
Republic of Ireland: www.123-3d.ie
00:00 - Intro
00:29 - Unpacking
01:08 - Contents of the box
02:00 - Assembly
10:43 - Booting up the machine
14:08 - The Ace Pro unit
15:35 - Loading filament
15:58 - Machine Self Check
17:32 - Menus
17:55 - More on the Ace Pro Unit
19:07 - Tools menu tour
19:52 - First print
21:16 - Outro

Пікірлер: 104

@NeonDreams7 Ай бұрын

A multi color print would be nice to see. That's literally the only possible game changer this printer has.

@AndrewAHayes Ай бұрын

Your right! considering that's the only reason people will buy this machine its the one thing they will want to see maybe another video will follow

@thatpspguy Ай бұрын

@@AndrewAHayes it will be my reason for buying it. bambu is too costly.

@Khalid193i 27 күн бұрын

@@thatpspguythe big reason to made me to buy this printer

@ki6igr 15 күн бұрын

Just purchased

@allenbassham2067 Ай бұрын

Put my order in this morning! I have always been an early adopter and am looking forward to this. I already have the Kobra 2 Plus and love it.

@thatpspguy Ай бұрын

You're probably about to get a lot of subs, just shared this to a group with 228 300+ members

@vstolpner Ай бұрын

Can't wait for the full review! Hopefully it comes in time for people to cancel orders if some features end up falling short. Would be great to see a comparison with the A1 combo unit as well!

@epsilonzero77 25 күн бұрын

Will the in-depth be posted before the early bird ends please?

@DannyThompson54 Ай бұрын

A nice first look. Thank you for that. The Ace Pro is the dog's danglies. A combined Filament Dryer and Multi-Spool dispenser, perfect. Such an obvious thing to do. Looking forward to your follow-up review of the machine in use.

@dtarot 25 күн бұрын

Just ordered the machine would like to see more on the ACE system I've seen other videos I'm really curious they were alluding to being able to use a 2nd Ace system and I think I can see how when you described the Connection for the ACE though I'm not sure how it will go through the print head.

@XxOjotaxX Ай бұрын

waiting for the in depth review!!

@Sparky5 Ай бұрын

Once I see how the print quality is, I'll either go with this or the Bambu.

@yvonnedicketmuller7760 5 күн бұрын

Hi, thank you for the video. I am thinking of buying this printer as I want to make multi-coloured TPU prints. I am looking to print with the really soft Recreus 82A TPU filament. Do you know if that would work with the ACE-system of this printer? Asking because it seems that the Bambu Lab printer's AMS cannot handle soft TPU filaments.

@boyblunder8889 Ай бұрын

Can we see the thing actually working in the real world with the AMS , I would like to know if I should get this or the Kobra 2 ?

@matthewmayberry239 5 күн бұрын

When do you plan to release the full review? I would like to know whether to keep my pre-order, or purchase the Bambu A1 while they're having their sale, but it seems almost nobody is putting out videos of actual reviews that have the printer, which is concerning on it's own.

@thorpedito6717 23 күн бұрын

We need the in depth review !!!

@mihaideaconu9994 27 күн бұрын

Hello sir, the printer have a filament run out sensor, or filament tangle sensor if I buy it without the ACE ? @123-3D-UK

@CrownedFigure Ай бұрын

Thats nice, cant wait to mess with one🎉

@Resin-Art-4beginners 10 күн бұрын

Nice video thanks. Still deciding whether to get a Bambu P1S or this Anycubis one lol. I just don't like the fact that the software is not open source with Anycubic

@amirehab7443 Ай бұрын

does it have a power loss recovery feature??

@huzzygam1 18 күн бұрын

Multi color, or multi material, to be able to make easy to remove supports or possibly imbedded TPU etc , no one’s commenting on this, so far every review is using the same 4 pla colors

@BennyTygohome Ай бұрын

So far i like it allot. It's very similar to BL A1 series at a glance, just slight variations. The filament hub/collector, for example, directly on top of the extruder tool head looks just like the BL AMS hub part. It's pretty cool to see others getting into the multi filament game and at a competitive price. I like that the filament box is enclosed, perhaps it will work as a decent dry box for PETG etc. Can't wait for detailed review 👍. Great video. Subbed 😎

@billb921 Ай бұрын

What slicer software ? Wipe tower required for multicolor prints ? Thanks for the First Look video!

@andreas.grundler Ай бұрын

A wipetower and/or poop is unavoidable on a printer with only one toolhead. The amount of waste material is likely to be similar to the Bambu Lab printers.

@billb921 Ай бұрын

Being that it has a filament cutter of some sort I was wondering about that. Thanks @@andreas.grundler

@lukeglavan Ай бұрын

it is identical to the A1

@rohithrao9050 Ай бұрын

Wow awesome , Looks like your the first person in KZfaq to have AnyCubic Kobra 3 Combo video.. other than company itself .. congratulations , Would like to see comparison with Bamboo A1 and whats the percentage of wastage while changing colors ..

@PatzelLetsPlay 24 күн бұрын

Nice first review. I have a question . How long is the lower base of the printer without the rail of the headbed do basically from food to food because I am considering to buy one but don’t know if it fits on my cupboard and also does it extend to the back of the printer or is the lower base of the printer the farthest point of the printer ?

@elsonadounsueno 21 күн бұрын

Official site says it is 45,3 × 50,5cm in base - bed center is somewhat in the middle of gantry and moves half lenght (~12,5cm) to the front and same to the back which logically gives you around 50cm motion range - give it some margin and guess with about 55cm in depth on a shelf you should be good to go ;)

@PatzelLetsPlay 19 күн бұрын

@@elsonadounsueno oh no not good only have around 40 cm on my shelf and not rly more space I thought that the feed are small enough and that the bed not extent too far to the back but many this is nothing for me too bad

@jeromeweaver809 Ай бұрын

Waiting on a bigger model like the kobra 2 max.

@lukeglavan Ай бұрын

i think the hole world is waitring for a xL color changer

@Mohaabartek Ай бұрын

Does this AMS work only with Kobra 3 or its universal AMS?

@123-3D-UK Ай бұрын

The Ace Pro colour change unit will only work with the Kobra 3 series

@lukeglavan Ай бұрын

trust me i think everyone was wanting a backwards compatible ams but i knew they where gona do this, once the bugs are ironed out of the small 250x250 kobra 3 i think they will launch bigger bed sizes, they would be dumb not to

@Mayu-nt5hx 22 күн бұрын

3D filaments included in box, is it?

@glitchinthematrix9306 Ай бұрын

Does this printer have anything better than a1 combo or it simply looks like a copy?

@hamist666 Ай бұрын

Hello, I have a question. The depth of the printer is 504.7 mm . When the printer is in operation, does the printing plate move beyond this limit or is 504.7 mm the maximum size in operation . For me the printer is in a box and it can't be larger than 504.7 otherwise I can't close the door.

@123-3D-UK Ай бұрын

Hi, we have just measured it and it comes in at 600mm

@hamist666 Ай бұрын

@@123-3D-UK thanks

@UnCoolDad Ай бұрын

Is this printer tied to the cloud?

@Mr360alan Ай бұрын

I'm looking for the more in depth review thanks

@123-3D-UK Ай бұрын

Be sure to like and subscribe! Full review coming soon!

Ай бұрын

Thanks for the video, I bought the machine to take advantage of the discounts, but I'm interested in having a review as soon as possible in case I have to cancel the purchase :D

@dannybrandon2822 27 күн бұрын

Same Here too. For a starter the Combo package seems really good pricewise. Lets Hope for the best!

@rickstokes2239 Ай бұрын

Definitely enticing at 1/3rd the price of the Bambu Multi-Color printers but takes a lot more to get it ready and will need a few months of use at least for some good feedback on real world usage.

@mikebal7777 Ай бұрын

My biggest question is can you pause a print, and swap out colors. Many anycubic printers IGNORE pause commands, OR never unpause. 4 colors is nice, but if I want to do more colors can I print for 6 hours, and then insert a gcode pause, and swap out the colors in the box, then resume?

@billb921 Ай бұрын

"can you pause a print, and swap out colors" if it don't, it will be a deal breaker for me. My Max I had to use 3rd party firmware to get the pause working right.

@Dazza2292 Ай бұрын

I know your asking of pausing but it can take two spool boxes and print upto 8 colours supposedly 🤷 I've ordered one so looking forward to it coming end of June

@mikebal7777 Ай бұрын

@@billb921 LUCKY YOU. My max has a newer mainboard that wont accept Wabbitguy or Zombie :( I litterally had to learn Gcode, and found a way to make it stop for 60 seconds and beep so I could RUN TO THE PRINTER before it started up again to change the filamnet

@billb921 Ай бұрын

With 8 colors makes it tempting@@Dazza2292

@billb921 Ай бұрын

I make magnets so need pause to add magnet@@Dazza2292

@pyrah Ай бұрын

it is klipper ready ? Very good machine for the price

@123-3D-UK Ай бұрын

I can confirm that it is running Klipper

@joescalon541 Ай бұрын

@@123-3D-UKdidn’t see any indication on the website that it is Klipper. Is it running mainsail or fluidd?

@3DandTeePrinting Ай бұрын

@@joescalon541 ANYCUBIC Klipper LITE. NOT open Sourced and Locked Down. But Technically it is running Klipper.

@Salamattder Ай бұрын

No linear rails? All those cords hanging everywhere?! Why can they not have a breakout USB board in the back to plug in the ACE?

@barrycartwright8400 25 күн бұрын

I did not get any cutters with my Kobra 2 Pro either😆

@Salamattder Ай бұрын

20:50 have you seen the benchy? Those overhangs are really bad

@3DandTeePrinting Ай бұрын

Okay good its not just me. It looks like every first print I get off my other Anycubic Machines.....Mediocre at best. Good PREVIEW but just another Anycubic ATTEMPT at a Printer. Let's see the in depth reviews as they come out. Let's see one that the Printer is NOT sent to the reviewer.

@Salamattder Ай бұрын

@@3DandTeePrinting I have an Anycubic Vyper, my first and so far only 3d printer. Overhangs are not its strong suit. I have completely modded the tool head for better airflow and only now do I get decent results up to 80 degrees. Stock was ugly!! However dimensional accuracy is not possible on this machine so I am moving on from the bed slinger world. Still have not decided what to do next.

@3DandTeePrinting Ай бұрын

@Salamattder Modding them out of their stock form is the only saving them it seems. My Kobra 2 is stock and trash but my Kobra Max is Modded and Wonderful.

@Salamattder Ай бұрын

@@3DandTeePrinting never have been able to get parts to go together very well. Over extrusion, round corners etc have plagued my prints. It’s exhausting. I’m hoping my results will be better with a killer machine with a few more bells and whistles. The tinkering is ok, but it’s sapping my joy at this point

@3DandTeePrinting Ай бұрын

@Salamattder tinkering is fun, repeatedly fixing issues is NOT. I completely understand your feelings.

@spider2021 Ай бұрын

I would love to see an in-depth video of you slicing a multi-color print, using all 4 colors. Walking through the process from start to finish. As this is the main focus of the printer, I think a good video on multi-color prints would be perfect.

@123-3D-UK Ай бұрын

I can assure you this will follow very soon!

@Happy3dprinting Ай бұрын

Not really interested by the printer but the ace pro unit is a big step up from both the Bambu units. I have both and ams lite on my A1 is much nicer to use than the ams unit on my x1c. With active drying the ace pro looks like a decent development. I don’t buy anycubic due to past issues, but hopefully they have got a great combo here.

@3DandTeePrinting Ай бұрын

Bambu has a new full AMS in development with a filament dryer. No Release date as of yet but is in development. I also do not buy Anycubic after ALOT of issues with the machine and customer support. Wouldn't waste my money on a Anycubic. Mega........ FAIL, Kobra Entire Lineup..... FAIL, Kobra 2......... FAIL, Kobra 2 Pro...... Almost there but still fail. Kobra 3.....Not off to a good start with that print. @20:50

@123-3D-UK Ай бұрын

Please take into account the file printed was only the test file Benchy that came on the machine, for this to print in under 12 minutes is very good for a bed slinger, I would never expect the quality at that speed to be prefect. We will be doing our own tests with this machine, and will post an in depth honest review on it 👍

@3DandTeePrinting Ай бұрын

@123-3D-UK Fully Understand that fact. BUT Factory Sliced Benchys of 13, 14 and 16 minutes on Bambu, Qidi Tech and Creality Machines don't look that bad. With Creality making it possible to Retro Fit a CFS on the K1 Max and Ender 3 V3 core Xz along with Bambus A1 line up of printers track record (minus the recall), and Qidi tech making good on its precious failures with the Q1 Pro, it doesn't make sense to put my faith in an Anycubic FDM machine. Trust and believe I am subscribed and waiting for a REAL review of the printer. Hopefully the Free To Review from... doesn't sway your perspective. The Kobra 3 is the only launch this year we don't plan on self purchasing for a review after repeated issues with ALL our previous Anycubics FDM printers. But I will withhold final judgements till you and others have put the machine through it's paces.

@Happy3dprinting Ай бұрын

@@123-3D-UK looking forward to your full review fingers crossed the ace pro is as good as it looks

@3D_Printing 22 күн бұрын

Creality K2 soon

@TheViejowill Ай бұрын

Don't waste your time , video does not show the ACE system working

@123-3D-UK Ай бұрын

This will follow in the deep dive review, our first tests show positive results and the ACE Pro unit does what it claims to so far 😉

@berlinberlin4246 Ай бұрын

Thank you for the warning!

@jensen4532 Ай бұрын

Why is ACE not introduced? It took 20 minutes to introduce only simple components, so it can be seen that ACE has a big problem?

@russellmitchell9438 Ай бұрын

🙄 title card even had a red arrow pointing directly at it.

@Higher_Realm Ай бұрын

Great video, would like to see multi-colour printing in action

@tonygagey Ай бұрын

Not interested in multi colour prints. Multi material prints now...That's what I want to see !

@songjatsharif 19 күн бұрын

Why would you do a review on a four color printer and only print one color???

@petermarkk1408 Ай бұрын

The shop has 0 Anycubic fdm printer! 😂 priceless

@sentlon Ай бұрын

We only wanna to know how bad it is compare to the bambu 1A

@3DandTeePrinting Ай бұрын

@20:50 Take a Look at the Print. You tell me is that....Acceptable for you. I have an A1. This is No A1.

@123-3D-UK Ай бұрын

I agree, but we must take into account the benchy we used was the pre sliced test file and printed in under 12 minutes on a bed slinger. We will be doing a lot more testing on this machine, and a full in depth review with our honest option on this machine.

@3DandTeePrinting Ай бұрын

@@123-3D-UK Let's take the A1 presliced benchy at LUDACRIS mode that can be done in 12 minutes as well. It looks miles better. But we will see when the FULL review comes out.

@SCABRFB Ай бұрын

@@123-3D-UK Take into account that it's pre sliced? well...they should have actually tested it over at Anycubic to see if it actually looks good... It's all very easy to make a machine that looks like the bambu and Ankermake had a baby, throw in some features like nozzle cleaning and vibration testing. But when it doesn't perform decent in real world performances, whats the point? They all just want a slice of bambu pie. I'm currently holding of on buying the A1, because i feel alot of manufacturers are going to make some look a likes and im eagerly waiting to see how they perform. If they all perform like this, it'll be an easy choice going for the Bambu A1

@lukeglavan Ай бұрын

i see an a1 with a nicer ams

@David-ty6my Ай бұрын

how much money did you get from anycubic to not talk about bambulab???!?!?🤨

@bobreichel Ай бұрын

I understand the desire for multicolor but that's a lot of money just to make some stupid little toys which seem to be what most people use them for.

@AllanFonroques Ай бұрын

Hello, this is a very bad video in my opinion. There is only one camera and as a result, we don't see much, closer shots would have been appreciated. We cannot see how the filament is managed in the box of the 4 spools. Given the space that the lid takes up when you open it, putting a second box on top would be very difficult for me. Ditto for the screen, it doesn't seem bad, but since we can't see anything, well we don't know. We don't even get to see the machine running, well yes, 5 seconds for the benchy, what a shame... This video makes no sense... On the machine, the PTFE tubes seem a little short when the print head goes to the right side, it pulls a lot on the PTFE tubes. Cable management seems very bad. I find that plugging in the multi-color combo on the front of the printer is a mistake. And this orange cable, all we see is that, what bad taste on the part of the manufacturer! I find many faults with this machine, I will not buy it, especially after seeing your video!

@elsap75 Ай бұрын

Advertisment only - no real information or details

@nahtanoj92 Ай бұрын

This video es more BS and nothing is shown

@RogerEberhart Ай бұрын

That is a terrible looking benchy.

@123-3D-UK Ай бұрын

I agree, that said this was the pre sliced benchy and it printed in under 12 minutes on a bed slinger. We will be doing some more in-depth tails with the machine. And as always we'll give an honest review.

@RogerEberhart Ай бұрын

@@123-3D-UK Yeah. I’ve printed a 7 minute benchy on the Prusa MK4 using input shaping and it was way cleaner than that. Then again, the Prusa is much spendier. This feels like pre-production results. Hopefully they get their input shaping settings dialed in before they release.