AORUS Radeon™ RX 6800XT Master 16GB GPU Thermal Pad Replacement: Tutorial (HD)

Рет қаралды 14,806

2 жыл бұрын

This video tutorial demonstrates how to replace the thermal pads on your Aorus Radeon™ RX 6800 XT Master 16GB GPU. In depth tips and detailed instructions on how to disassemble your graphics card, replace the thermal pads and put your video card back together again, using THERMALRIGHT ODYSSEY THERMAL PADS.
Technical Specifications of Aorus Radeon™ RX 6800 XT Master 16GBGPU featured in this video can be found at:
www.gigabyte.com/Graphics-Car...
More information about thermal pads can be found at: www.thermalright.com
Please Subscribe, Comment, Like & Share!
Add Me On Facebook:
/ gunsgearnfreedom
Follow My Blog On Tumblr:
/ gunsgearfreedom
Follow Me On Twitter:
/ gunsgearfreedom
#Aorus #RX6800XT #THERMALRIGHT

Пікірлер: 44

@zhardy323 Жыл бұрын

i appreciate any gpu teardown. thanks for the honest work

@user-ow5go7jf5v 3 ай бұрын

I didn't watch your videos but I changed all thermal pads in Gigabyte Gaming OC rx 6800xt. The best choice of thermal pads fot this graphic card is 1mm and 1,5mm (for VRAM). I used Gelid thermal pads. 2mm was to big in VRAM :)

@AtiCrossfireX 2 жыл бұрын

Nice video review how to change your thermal pads for your GPU. please note don't do the same mistake power color did. leaving the plastic on the thermal pads lol.

@dornnate91 Жыл бұрын

great video man. Thanks.

@vturinsasha 2 жыл бұрын

Morning. Finally on the memory you use 1mm or 2mm pads

@ahmetturani8154 Жыл бұрын

Hello will we use 1mm pads everywhere for this rx 6800 xt.

@lesternoguera1539 Жыл бұрын

U used 2mm pads on the big ones? And 1mm on the thin ones?

@raynathanielcaparas8064 Жыл бұрын

Are thermal paste bettet than thermal cooling pads?

@henrique5640 Жыл бұрын

they are fine until now?

@ntdsimulator1042 2 жыл бұрын

Are you experiencing reduction in temperature after repadding? What you showed at the end of the video was GPU Core temperature right? What about the memory/vram temperature? Has that also been reduced?

@GunsGearNFreedom 2 жыл бұрын

You know, that is a good point. I only checked GPU temps. Now you have me curious about the vram temps. I have only ever used the LCD temp readout and the AMD Radeon software. They only show GPU temps and not vram on the card. Do you have any recommendations for what software to use to check vram temps?

@purnesh27jagad11 2 жыл бұрын

@@GunsGearNFreedom Any update in this regards? i am planning to change them, hoping it will reduce temps of my current 6800xt mining at 78 deg. Please reply. will help me make a decision sooner

@GunsGearNFreedom 2 жыл бұрын

@@purnesh27jagad11 Replacing the thermal pads has helped me significantly. I am mining crypto, watching the State of the Union and typing this comment on KZfaq and my card LCD screen is showing a temp of 51C with 99% load.

@purnesh27jagad11 2 жыл бұрын

@@GunsGearNFreedom hi brother. Thank you for helping me out. I have finally replaced the same, ofc thanks to your tutorial. I just want to know what thickness you required? After reading your ans to a similar question, even I completed whole job with 1mm thickness. Just want to know should it be fine? I am yet to complete the whole test as power went off.. but initially hiveos showed me temps of 84. (shooed up from previous 72,dont know why) will complete and get back to you. Just want to know is 1mm thickness enough. Thanks in advance

@GunsGearNFreedom 2 жыл бұрын

@@purnesh27jagad11 I used 1.0mm thickness in mine and my temps have been holding stable under 99% load at 52 degrees C.

@michaelnichols2192 Жыл бұрын

Great video . What thickness were the pads . I have the same gpu

@MrHeHim Жыл бұрын

He replaced the pads with 1.0mm on the memory and 2.0mm on the outside pads and then put 1.0mm on all. But the original look thicker IMO but i noticed some are very compressible and others very little. They DO make thermal puddy to replace pads, but of course are messy. I used to use Arctic Ceramique paste in place of pads back in the day, as its formulated to not "separate, run, migrate, or bleed" and works much better than those silicone based puttys. Used it to cool VRM's on my old motherboard, and after 8 years! the stuff didn't dry out or even run despite the gaps. And i also used that stuff on an old HD 7950 that i volt modded and OCed to hell (1650MHz) and was temperature limited (hit high of 95c rock solid) even with using old school Liquid Metal that you had to replace every 6 months lol They do sell pads in 0.5mm increments and different materials, but if you don't mind making a mess you can get putty. Personally I'm going to pick up another tube of Arctic Ceramique, the stuff is amazing for it's use cases.

@ericknoleto 9 ай бұрын

@@MrHeHim I also had the same impression that the thermalpads looked thicker... I'm thinking about using 2mm and 3mm on mine.

@RussTeeRider 2 жыл бұрын

What are the pad thickness you used for the card? Thank you.

@GunsGearNFreedom 2 жыл бұрын

I purchased both 1.0 mm and 2.0 mm thick pads. I ended up having to use the 1.0 mm pads across the entire job, only after I discovered that 2.0 mm pads were too thick for my application, because they wouldn't allow the cooler to sit in place correctly.

@RussTeeRider 2 жыл бұрын

@@GunsGearNFreedom thanks for the reply! I have the same card and wanted to replace pads too as the card tends to run hotter now compared to when I first got them. Thank you for the video, too! Great help.

@GunsGearNFreedom 2 жыл бұрын

@@RussTeeRider These seem to be pretty solid cards, and come with a decent cooler, but those factory pads don't seem to hold up very well. I have been running this card mining Ethereum 24/7 except when gaming and the card under 99% load is now running between 49 and 51 degrees Celsius after changing the thermal pads. That is down from being 60C and above.

@RussTeeRider 2 жыл бұрын

@@GunsGearNFreedom That's a very nice improvement. Thanks for the insight. Will definitely try to replace my pads in the future! Cheers! Will try to do this with my aging 5700 XT, too.

@Rob-qs3xx 2 жыл бұрын

i wonder if the 6900xt version of this card is the same pad thickness

@Mr_V989 Жыл бұрын

yeah got same question, i've had a quick looks 1mm but didnt try to replace yet, did you?

@sajithsaji3606 Жыл бұрын

Bro I have a doubt how is AMD drivers nowadays bro any issues ? Any stutter issues? Any black screen issues? Please share your experience

@miteamihai1132 Жыл бұрын

@@sajithsaji3606 got a 6900xt aorus dog shit drivers.

@enrikexyz Жыл бұрын

Se puede usar almoadilla 1.5 mm en todo?

@Manu-yw7nf Ай бұрын

Yo usé de 1.5 para todo sin problema como te fue a ti usastes de 1.5 mm para todo ??

@Masculinemotivation333 2 жыл бұрын

Where did you buy it from and price

@GunsGearNFreedom 2 жыл бұрын

The brand I purchased for this particular replacement was fairly inexpensive and they can be purchased nearly anywhere online. Amazon, NewEgg and eBay all seem to have them available for sale.

@r_z_t_17 Жыл бұрын

@GunGearN Freedom, Load up on vitamin B's. It will help your central nervous sysytem ( CNS ) and yor hands will be steadier.

@Joshua-kw8ph 2 жыл бұрын

Could you write us the measurements in millimeters?

@GunsGearNFreedom 2 жыл бұрын

1 mm thick. I measured using the original pads before I removed them.

@zozonce Ай бұрын

@@GunsGearNFreedomI think he meant the thermal pads measurements (width and length)... I am also curious about them.

@cloud9photography126 5 ай бұрын

you need to spread the thermal paste evenly with your finger on the GPU, just leaving it a pea size will result in less coverage...when will people learn this.....sighs