Finally, a fellow quad rail enthusiast. My go to is a DDM4v2, so basically this but 100% DD not just the rail

Very cool overview. Kept my attention and wasn’t bloated with filler. Outro Op Ivy music was a plus. Subbed.

Very cool build! Cool buck in the back ground too!

Nice setup. I personally prefer the grip textured rail panels but that's a great SHTF rifle. Good job

Thank you for presenting the public with your end all be all rifle and for it being a quality rifle and not a PSA. Thank you sure great build and thanks for not leading the general public in the wrong direction with just like so many influencers do.

I randomly found this channel and i really am glad.I really like your humor and relaxed nature.I hope when i move to US i get to make a Clone or cloneish Block II,it's absolutely my favorite set up

I just finally finished my Colt Block II. It is an absolute workhouse and total tac driver. The Colt Socom barrel is god damn glorious. Holy shit what a beautiful rack on the hog…

Great video. Appreciate your time. First time watching your channel. Subscribed and look forward to more!

Nice. 1000% agree that Colt M4 paired with Triji ACOG are tried and true work horses. I used to tell people 15 years ago my Colt M4A1 could shoot SUB moa groups and no one would believe it could. TDP Colt / Colt Canada barrels are insanely accurate for being milspec. Especially paired with MK262 or TMK . Nice video bro

Thats a sweet looking rig......man quad rails are just sexy

Good to see you are doing good “SLICK”.

I like this build, mine is almost the exact same. Acog- no battery. Offset-multiple years on one battery, great of both worlds put to distance and up close, respectively nice flash hider for the teams ears, solid, reliable, takes a suppressor. Well done

Sweet rifle especially with the FSB! It's crazy to me that that rifle is considered retro now. I hope Colt, DD, and BCM keep making their SOCOM carbine barrels...

Great vidéo. Thanks !!

A huge buck walks behind you in the intro.

Perhaps the term “ clone inspired “ would keep the trolls at ease. 😎 Nice rifle.

Your channel needs to blow up

Nice buck sliding out in the first seen

Nice Rifle

God damn that was a beautiful buck that sauntered by. Nice Block 2 as well. I have an urgi but keep the mk18 on deck so I can at least be in mini block 2 territory. Rock solid shit.

That’s a solid build. My go to setup is an 18” with a 1-8x LPVO. Im a little slow on 1x compared to a straight red dot

I like the custom of the weapon you have 🙂🙂

Did anyone see that huge buck in the back

Glad to hear I'm not the only person that doesn't like the Vickers sling.. it really sucks to adjust. Also glad to hear a lil Operation Ivy!!

Finally! Now I know I’m not the only one that doesn’t like the Blue Force Gear slings. I know people swear by them, but I’ve got a couple, and I don’t like them. Nice rifle, BTW.

Nice set up ! what is the model of the acog glasses? thank you in advance

What about flashlight interface behind cover. When bracing the rail on ledge or thru porthole to stabilize? I can see the bottom of the flashlight housing interfering.

Relevant thanks 10.3.2022

That FSP is EMP proof too. Technically a Caveman EO Tech.

M4A1 SOPMOD Block II FTW

you drilled the rail..good to know 🤣 You're welcome. lol

i had a ddm4a1,wish i still had it

I would use m4 with acog and flashlight. While EMP might not hurt electricity items there would not be batteries available.

I thought it was just me too but the vtac sling isn’t great.

What was that on your mag at the beginning of the video????

Boys , how close can we get to this on tarky.

Perhaps I'm early but where are the links? Sweet set up! I'm seeing lots of things that many people who have actually been in combat do the same. I appreciate the information.

Just found your channel and subbed. What’s your zero on acog, t2 and irons? Actually didn’t notice if you had rear iron or not. Honest and squared away channel content. Thanks

I have 2 Colt m4a1socoms and a Geissele urgi clone complete.The m4a1socoms are set up kinda like the block 1,ras rails,14.5 usgi barrels with the flats,matech rear sights,su231 and a t2.The Urgi is on a Colt m4 6920 lower and sig 1x6tango and magpul pro buis.I didn't go clone because the gear now is better.They all have sf600 lights with offset mountsI,magpul grips.the urgi has the keyhole and C on upper reciever and the cage code,DD mid length 14.5 barrel,sf4 fh,Colt bcg mpc and cage code on the extractor.I guess it would be called block 3 ?Let me know.

I want to know where everyone is running to, I'm hunkering down at home

Is that a full power peq15 ? I’m looking for one for a rifle I just built. If it is full power do you know of a good place to find them for sell. I’ve seen some on gunbroker. Was wondering if maybe you knew of anywhere else to look. Love the build by the way.

Same I have one thats clonish

Look at all this weight, can't wait to ruck 20km a day with it

I don’t have personal experience with it but I read that the warcomp can create more wear on a suppressor. Not sure if you’re going to stick with it but that’s why I went with the SF3P

Semper Fi Brother. I have a M4A1 and M4 block 1 clonish that I built myself. I do have upgrades to them to keep them longer in the fight. Will be building a MK18 slowly as I have the money available. I have the same sling but the padded one. I do need to do an update video of my M4A1 for my channel.

Who saw that ole buck in the back ground at the beginning of the video??

What barrel profile?? Govt or socom?

Bundled in one bundle

i watched this twice through, i may have missed it, but whats the barrel length? 16"? also love the setup bro

Zombie MK18 in 5.56 for me

I’m on the fence on if I want to throw a RIS III rail on my mk18

What’s the point of the FSB if you don’t have a rear sight ? Just curious

This is a 14.5" ? Maybe just looks like a 16 to me because of the A2 sight post

How long will that rifle be once you get your suppressor in?

how good is that a2 "index point" when its hot AF?

Ok, I'm not the only one who thinks the Vickers sling is crappy.

Am EMP will not kill a flashlight, unless you're so close the explosion used to generate the energy burst kills you.

Centurion arms CHF xxxl cL Socom barrel and its Center tablet gas block extremely low profile probably one of the lowest profiles I’ve ever seen in my life yes block to where they have to put the table pin on the top of the barrel opposed to underneath but it’s center tagged similar to an H and K416 barrel which helps you get perfect alignment and it doesn’t use set screws but you can if you want to but the ID and OD of the barrel and the gas block is so tight it literally has to be mounted on and Shimla on towards the end to get it over the Gasport and it uses cream Gasport .061 which varies crane spec is it I believe .0625 and they most likely put it at .061 because of how tight the gas block is honestly it probably has a less leakage than a SR 15 barrel I believe it was about 500 bucks but it’s well worth it as it will last a lot longer than a colt sure fire four prong and if you do use that muscle device just so you know if it’s a note NFA item that tacular most of the virus since it in military a.m. that I guess there’s sometimes now sold to the public which I bought straight from cheer fire and I’m probably gonna put one on my radian 10.5 300 and that’s because of the direction of the carbon and what not and get I believe much less leakage and the CTN is really good as well but the city and work comp keep your life away from it because it’ll cook it has been rolled laser as long as it zeroed is a great set up as you can use it in the daytime in the viz. mode but do be aware Bad your IR laser on vision mode shoots a very strong laser point and you don’t want that shit reflecting back at you as it can cause some damage obviously but if you do buy a and want to build some thing that’s like a clone and that actually would be somewhat correct as far as optics because I had friends that ran Aim points on an offset with a ACOG on an M-16 A4 and depending on your unit and what not you can purchase your own shit and especially with the USMC they make you pay for everything you lose I have a troy grip that I use the shortened part B5 stock with a riser so it’s somewhat modernized as I’m using an MRO HD with a FTC unity set up I believe it is the SR 09 that you’re talking about I have the SR 07 or ST07 on a DS007 because let’s be honest those switches fail and not many dudes that I saw ran door switches I don’t even think they were a thing back then there was the crane plug-in for IR but I think Rangers were getting the newer sheriff fires with the S00 tail cabs I don’t know the output of them I know they were earlier on but like I said the Marine Corps is logistics command decided for the PEQ 16 with an integrated white light instead of having a white light guys bought what lights and put them on there just because and now people are putting mini scouts on their helmets which isn’t bad because now 500 lm or whatever but it is probably my shit as a fan rifle I love it as also when you buy something that the barrel is crane spec Gasport expects you to use High-end ammo and specifically shit like black holes which is among the best underwood finally is making rifle rounds which do you want to test but I think shits gotten too kind with the dual switches and what not I do like the unity axon switch but as far as white light I use for cable management as well the cloud defensive mount now I’m waiting for a reduced price for a pair of maybe 42s I’m not sure but a pair of PBS’s and night vision I’m looking to buy and locally have a neighbor who is an 07 so he is going to look into helping out that and it’s OK I’ll pay whatever I’ll buy case of them I’m sure I’ll be able to sell them I haven’t honestly we’re gonna need them but as far as the muzzle device suppressor wise I think the four prong makes a lot of sense because of the Ford dispersions that it goes in on the side it’s rather than those drugs ports that just below fucking carbon and shit to wear I had my share fire scat white pro 1500 dual fuel so not a cheap light but the fucking head was a little bit too forward and it’s neutral time to but it’s still has like an angled blast and a regular birdcage you should be able to control shit with but the sheer fire Is the best as far as the open tube in my opinion but people used very very similar Set ups but as far as optics I saw a offset Red dot in conjunction with the nightforce and an NT4 but MARsoc really wasn’t a thing until later on in the war and then again how far into it are we it’s gonna be a little war fucking like truly global terrorism like we’re gonna be fucking having dudes blow up in our backyards now because of this border crisis so I suggest people that have a carry carry it also H2 super 42 a run with good ammo and an SSAE trigger (I am companies a lot of the time will tell you hey you need to run and ammo through it for tablet correctly especially with the Right buffer weight but not a lot of Marines were issued the m4 ris 2 And if you look at shit now guys are shooting M4 suppressed the old nt4 with a Delta ring and a wire they have now it’s like a clip on fucking rail system that makes the gun sort of look like a RIS to but I would not trust it for the zeroing with my life and all the whole point of it really was more free men of your hand and more modularity on where to put the laser and then they got rid of the FSP gas block and guys ran the afg and yeah the blue force gear slings were used in all sorts of shit and basically I would just have that short suppressed upper for example I have a 10 three with a MK four rail on it and I have to do swap it out depending on what the situation may be and all it has to do is sit next to year LPVO But I’d say get what is functional for yourself what works for you I would suggest etched radical for sure because of our unnecessary times right now so that again and EMP happens we are fucked anyway possibly make sure you have little things like a spare bolt you don’t want to Shirov a bolt a spare gas too little things like roll pan and Punch sets so you can quickly do things in the field now the R I S2 has a six bolt lock up system at you Ken switch something out in the field but it’s not gonna take two minutes unless you have a power drill connected to Unscrew the six bolt lock up which if you take it too far one way or the other you can easily have zero issues as far as the rail goes and you do want to look down the end and make sure everything is centered between the Rail and 100% about blue forest gear it does fuck up if you use the sling a lot like I do like the pattern slings but I don’t like the material but then again necklace hanging or what not I recommend what works for you but I like Ferro concepts swing stairs you know I have those as well and all you have to do is get a couple Magpul QD and you’re good to go as long as you have the attachment for tonight into and just Loctite everything down no not with red Loctite blue Loctite is what you use and you really actually as long as it dimples your barrel you don’t need to pin it necessarily even on A select fire lower as long is the Loctite or rocks that whatever is on there and it’s good to go but the pinning is a easy on and off I say probably takes about the same time to knock out a paper pen but that’s another thing you want to think about caring extra taper pins and extra gas tubes if you have a select fire lower say the government decides to be like Ukraine and hand out rifles to civilians I would just get the best of the best if you’re doing a GWLT build because hey it’s sentimental not so much the 13 inch or 12 1/2 inch rail it was used a lot more with Lee and Kp team which will get the job done just fine as long as you’re using good quality ammo I have a good quality fucking barrel out of a quality upper And lower and yeah I have a can fucking 2 miles away is your fire that’s just waiting for me it’s bullshit but you have to deal with it hopefully they’ll speed things up if they think we’re gonna have war fucking three or it might slow things down but as far as the centurion arms barrel I would recommend for receiver sets as well because they do offer thermal fitted matched receiver sets and they do Cerakoted over anodizing if you want and I don’t use that many whatever ergo I think makes the rail panels I basically have them where I need them where I see clamp and what not but I don’t want to say that that’s not a correct set up because it’s sort of correct I mean it’s a sure fire muzzle device if you have a suppressor out for it but then again the waiting list for some things like in the price dodging of suppressors now I am probably going to do an RC three as well and if you’re looking into Nfa stuff find a SilencerShop kiosk and you can easily As it’s the same shit as when you buy a firearm except you don’t get the gun same day if you have a CCW for example I started to lieutenants shit like proof research their stuff is the barrels are supposed to be like them amazing and extremely lightweight which is awesome 🤩 thermal fitting is basically you just have to use a torch as your putting your barrel in you slip fit in and thank your eyes it even more Loctite 680 instead of putting grease on the extension I still use grease on the threads but not the chamber extension

Prism + dot ftw

What is the name of your company for product line? Always interested in innovative gear developed by professional operators. They have had a lot of real time working out design flaws in gear

Im too poor to clone, and alot of consumer public market products are better. All of my builds are built in the spirit of. I have a mock 18 build and a 16" U.R.T.R.Y.

What’s that thing on your mag?

I always call mine “inspired builds” Block II “inspired” lol

Does anyone make a solar powered rifle light?

We not gonna talk about that monster fucking buck in the background???

Is that a M4 profile barrel?

Unrelated, but have you tried playing Ground Branch or Ready or Not on PC?

I feel like it being on a deployment gives clone cookies just saying

How long do batteries last in your night vision goggles? I just see SHTF setups that take tons of batteries. NVG, lights, lasers, red dots/holographic sights etc. And I’m not trash talking. I actually have no idea and I have no experience in the military or zombie apocalypses. It’s just something that has given me thought with all the electronics on peoples load outs. Plus radios, headsets etc. For instance, the surefire is a new battery every hour of use. Just for that one device. Most of these systems seem more for weekend warrior shit. If shit gets so fkd up that our society collapses in the US or Canada, shit ain’t getting back to normal for years.

Nice green screen. Where do you buy one?

whats the length ?

I have a pretty similar set up I did not want to buy a colt barrel because I wasn’t too much into the cloning aspect of it but I want it a good M4 socom barrel and century in arms makes a heavy M4 A1 heavy boy that is a got a extreme tight gas block it uses a low profile MK12 style they do with the taper pin at the top of the block which is different and they also have the gas block tapped basically dummy proofing for people Sidenote it’s a very tight gas lock when install use clp on barrel and use a mallet and shimmy it off basically The big thing about the barrel is it’s cold hammer forged and chrome lined (twice the Amount of chrome lining also they say) and I had the ramps polished by them They are Gasport is cranes spec so it’s .062 I believe with an H2 super 42 buffer runs beautifully and then it’s the cold profile but it’s just a tad improved by being cold hammer for Stan is definitely a sub minute gun w some mk262 and a few SMK match ammo I have to say it’s definitely noticeably more accurate than another barrel in the same length …. This offer definitely could go through some serious field use full auto I have no corner s I’d be it to Ukraine if needed to bring a m4 upper prob that w a 100 dollar not gunna blow gas tube n I’d be ran full auto and be 1000%more reliable than a reg m4 barrel in life on third position.

Ide rather a piggyback 509t with the acog so u dont have to run canted clearing buildings/rooms

Emp can’t kill iron sights lol or etched reticle scopes

We could get some contacts for a Governament Issue M4a1 here in europe. My goal its to put the Daniel Defense RIS3 FSP, B5 Systems Stock...as far as acessories i cant put more than what i have: Holosun Magnifier and Sight, Holosun IR Laser, Olight Odin Light, VTAC Padded Sling, Strike Industries Bipod Grip. Thats my primary base for the End Times... I could get some other platforms but thats the best for the Apocalypse...plus we can count that with all going wild alot of guns stores, regiments will be left abandoned... We are not expecting an EMP in Europe but for Sure we are going back to medieval Times...its the Biblical End Times

A marine and an acog can do some DAMAGE

Screw the 20 year old rifle set up. Get on that massive buck that walked by.

If you were doing a row 2 build check the send her in arms socom profile m4a1 barrel that is CHF CL and the barrel is crane spec colt profile but CHF they also tab and pin the gas block that is a tighttt seal like a virgin lol some lube on the barrel and shimmying it of (good no gas leakage/loss) . 062 carbine crane spec port yes w the 203 cuts obviously the one odd thing they taper/ cross pin done on top of barrel no issues tho

Nice for nostalgia but there’s better builds that are lighter and have more features and top rail space.

LOL

clone correct? we had t2 and i ran the exact set up u have for years, acog with a offset t2. my last 3 deployments i switched to a 1-4 with the same t2 in the same spot. the upper is what u clone,an operator or sf can put whatever optic they want.hell i was allowed to run my own upper if i wanted too.awesome vid man

Usmc use the PEQ 16 IR you have is like 100 lm white light So if your union allowed Marines wide I had white light or an offset red dog that was purchased by themselves A regular colt barrel even the SOC 0M that’s supposed to be in their will not shoot with black hills half minute no fucking way I’d say they range like 3MOA and say you have a foot or a lower select fire or a rapid trigger finger you definitely want to have your gas tube upgraded to there our tubes that I have like relief fins and things like that that won’t droop as the gas tube starts to glow for anyone that they’re in the military or have an Esso tea for a select fire lower but besides that the barrel that would be correct is the colt SOCOM but it is not CHF it is just regular 4150CMV with chrome lining How censuring arms uses machine gun 4150 and has a cold hammer forged double chrome lined barrel with the crane spec Gasport which is .061 approximately it can vary from .060 to .063 I believe is acceptable their website list sit at .061 and that’s what it came up as when I had the port size The barrel I purchased and add 50.061 but not .062 so like .0615ish Using an H2 geissele … and your endpoint offside I’ve seen Marines run using that now which I know very well arisaka 35/45 degree mount it looks more like a USMC set up but a lot of guys still had the LMT but marsoc And the rest of special operations command it would be the nt4 birdcage usmc/navy anyway monty mcClaire who owns century an alarm for specifically states that these are high end barrels and you want to use a high-end ammo with them but HLAF MINUTE? With centurion arms yea 1 moa all day and 06 21 so Basically the military is almost 10 years behind a civilian shooting command for example the new midline gas system a lot of different variance short stroke piston and so like the HK now that would be my go to gun if they did more commercially sales but they really don’t care about that even though everyone and their mother would love HK 416 and can chug along and stay cool at the Bcg ect as far as the BCG‘s go the dry film lubricant or the stain cutter from nights if you can find it you want to have it in hand book carrier and if it’s an end of the world gun make sure your past system is sick share Lee on there meaning not setscrews but taper pin especially floral work very fast send me your now as you do not want that gas block walking lot and then you have an issue I don’t see why mine is nowhere near close correct I chose a barrel same profile as the heavy barrel has the cuts on it heavy rear for the M203 as does the rail has the tabs in front So putting them next to each other they’re basically the same barrel the cold might look a little bit shittier because it is he decided on improving Colts original improved barrel that actually is very very different from all the other profiles as if you just really look at it it just is very thick and tapers off then like some of your newer profiles and keep the weight in the center more than outfront like most government profiles are so it’s more we’ll be then if you put a regular coat and four barrel even though it weighs more the regular M4 barrel is going to feel heavier underneath because of the front heaviness Oh and if the rifle is too heavy for you use a padded sling risen on deck and train with it and lift a little and you’ll realize that your other guns are going to feel like they win nothing my “Block three and MK 16 is a pretty solid locker I really have to say and uses capture bolts which is pretty cool and four in the rotation area so even if you don’t have a set screws in the upper it’s gonna stay zeroed but I Don’t know like maybe because everyone loves running those rails and they could’ve just went ris3 or 2 Mlok and you can use the same bolt of clay and barrel so it’s very very easy swap but then again they are using Daniel Farrell because they finally realized a cold hammer forged bow will last a hell of a lot longer than a regular now as the metal is stretched while it’s cold as coolant is running over the hammers and demand rules coolant is constantly keeping it warm but not hot and they’re stretching out the material instead of cutting it away so use if you don’t know what I’m talking about look it up and Ull get it and Sharon 416R stainless barrels are extremely accurate but the very low round count especially for a combat barrel for example I saw Navasky‘s with stainless barrels team six dudes they were 11 1/2 at first I thought they were probably 300 blackout 10.5 but no so safe to say I’m sure they got some very very high-quality noveske shut ups especially just for them I’m sure they have their barrels swapped or maybe they’re just using them for R&D and see how they like them I don’t know but a 0300 infantry Marine even right now would still get a FSP M4 as they could’ve repurpose them since what the Armorer‘s are doing is pulling out the old barrels and rail I guess cleaning out the upper and we’re talking you know a beat a cheap hopper here they don’t care they’re just gonna throw it on there and they put it in the Daniel barrwl With their penned gas block and MK 16 rail and a sure fire and I have not seen any Marines with the anti-Ford but do you know the Marine Corps did order 50,000 I mean it’s a 30 year old suppressor but OK but I think it’s for the IAR 14.5 and yeah I would go with that over a block to any day it was a full good to go definitely take the Iar but then again if we’re talking about World War III who knows maybe they’ll start selling full auto trigger groups and shit like that maybe the ATF is going to be abolished as they are currently trying to do and thank you Brandon Herrera for coming to the sunshine to state that the ATF is again overstepping and destroying firearm dealers one particular JNM then repair a 48 year master guns at that I was getting some tips from as I am going in that field and anyone that has their G.I. bill they except it SDI.edu Otherwise it’s about $12,000 for the year I believe is about 70 week course but hey my rifle using worech w unity dast setup and ape. Defense cheek riser oh and the ct. warcomp I do believe the regular three prong is a little bit better tested and 10.3 w 3 prong warcomp and ctn both neutral timed it kills the huge flame 🔥 a birdcage on it like a break was on it but it was dif in felt recoil and not up and away so look into surefire lights suppressors and muzzle devices

wtf u have blueforce sling?!!!