Please subscribe to get New video www.youtube.co... __________________ How to remove adhesive film on lcd iPhone (របៀបជាហ្វីលអេក្រង់អាយហ្វូន): • how to remove polarize...
Пікірлер: 126
@FinsleysCustomCarAudio5 жыл бұрын
What happens if you don’t solder that cable back together? I noticed that you tested and turned it on and it worked before you soldered that. Will it still work? If not, How did you test it with it being soldered?
@drakemcgowan90786 жыл бұрын
What glue do you use for gluing the display to the watch?
@tyler_thenthaysong5 жыл бұрын
YOU ARE MY HERO THANK YOU!!!!!
@sebastianrojas276 жыл бұрын
¿Did the glue Waterproof the watch? (i recently broke the glass on mi watch) glue "paste" fine the pieces?
@davidD33336 жыл бұрын
Great video, thank you! By following your instructions I managed to do the repair but unfortunately the glass I received did not contain the firmware data so it did not work. Fortunately I did not glue it to the LCD, so I still have some chances. Do you know any suppliers (ebay/amazon) that sell digis with data included? Thanks!
@cambofixing6 жыл бұрын
The touch screen I'm order from China But sometimes it doesn't work too
@Dnasty12 жыл бұрын
Great vid but what do I do if i don't have one of those giant expensive laminating machines?
@okadajiiko87736 жыл бұрын
can replace only glass? i mean that can you re-use touch connector which you separated? because i saw selling glass only.
@AjitKumar-yv3zy3 жыл бұрын
Buy kaha se kare bhai
@alvaroayala16833 жыл бұрын
Do you has a video to replace a touch sensor?
@sangbrizcali61194 жыл бұрын
I have a broken screen but the touch is still working what should I replace ? LCD touch screen digitizer or front touch screen panel?
@vikashverma0014 жыл бұрын
How to get new simple touch for smart watch ..plz help me
@luwate50284 жыл бұрын
Hi where i can buy only the lcd panel
@giakapoor124 жыл бұрын
How can i get my watch repaired from you
@jatinyadav8465 Жыл бұрын
Series 1 touch glass replacement price?
@MrAdamchacon3 жыл бұрын
So, I followed the directions which are very good I must say. I removed old cracked digitizer from lcd display. Then actually plugged in the lcd after it was cleaned and the apple logo popped up and everything. So I take it off put it aside and grab the brand new digitizer and connected it two the LCD display which I just tested with it worked. I put two faced tape, Which I had used for many tablet and phone repairs, on the perimeter of the watch where the screen was going to get sucked into. Snapped the two connectors on put the metal piece back on over the connectors. And follow the rest of the directions. But after I was done I put it on the charger and get half an apple loading on my screen. I don’t know if I manhandled the LCD too much or put too much heat on it when removing it from the digitizer? Any suggestions?
@gohiljaydeepsinh53773 жыл бұрын
Bhai meri watch t55 upra ka kach tut gaya he ho milega bro or kitne rupe me milega or kon si jgah par
@aticofreirelandgraf46226 жыл бұрын
Excelent work but I wanna know if iwatch series 2 remains waterproof?
@onuryasar90606 жыл бұрын
Good work, thank you. Why don't you use the original digitizer? Can't you clean the adhesive on the digitizer, and put new screen on it? (just screen glass, without digitizer)
@cambofixing6 жыл бұрын
The first time I want use the original digitized but touch is not smooth, because I'm clean it Hand wash heavy so i put new digitizer
@rajurao6061 Жыл бұрын
What do you buy this touch
@pankajkumar-tq4kp3 жыл бұрын
S pair kaha milte h sir
@JokerSaim2 жыл бұрын
Bhai is ki tach kaha se buy karen batao bhai
@cambofixing6 жыл бұрын
yes sir touch Apple Watch have two type, it have touch glass only and touch cable sometime it not working too
@altafkhan96916 жыл бұрын
My watch model w88
@gouravsethi46786 жыл бұрын
how much for series 1 or 2 glass replacement send your address or contact number
@priteshsolanki66293 жыл бұрын
Bhai mere watch mein asha hua hai glass kaha se mil sakta hai
@UmarFarooq-vy3sn2 жыл бұрын
Bhai aapane is watch ko jo screen card dala hai uski link bhejiye mujhe
@santzying6 жыл бұрын
the 3d touch still working?
@rebeccatrelstad6246 жыл бұрын
How do you get the digitizer to work without iBUS connector?
@pablolimarino85292 жыл бұрын
Excelente, mire otro video y le arranque las pistas del tactil sin querer. Buen proceso, saludos.
@axelboudignon8226 жыл бұрын
hello the big machine you used is it mandatory? Is there another way to glue the lcd screen?
@PlayJewel6 жыл бұрын
axel boudignon yes. Instead of using the adhesive film(oca sheet) and the machine, u can use 'loca glue' and a cheap uv torch.
@thischicksmobilerepair21654 жыл бұрын
What about the clip that holds the cable connectors? You left it out!
@pratikgangurde3872 жыл бұрын
Bhai app ne ka se Le ya Screen
@ramanrajput60896 жыл бұрын
Can I open display DM 98 WATCH as same prossiger
@cambofixing6 жыл бұрын
Raman Rajput yes please sire
@mayankvarun24033 жыл бұрын
ye watch kitne rupe m replace ki hai
@Lagunasaxoxr26 жыл бұрын
You forgot to put the holding clip back on the two ribbon connectors 👎🏻
@chandurambo16 жыл бұрын
Rob Burton Expected some one would point that one 😄.
@FinsleysCustomCarAudio5 жыл бұрын
What happens if you don’t solder that cable back together? I noticed that you tested and turned it on and it worked before you soldered that. Will it still work? If not, How did you test it with it being soldered?
@WichoTraance4 жыл бұрын
3:07 which is the temperature, for separated the touch and the screen plz
@mohitrajput15044 жыл бұрын
भाई tuch कहां मिलेगी gt08 ki Please
@nawabshabmanesh41514 жыл бұрын
Hi bhai kitna ka ha glass
@Rao_AnshuYadav2 жыл бұрын
Touch kaha par melta hai
@DucNguyen-tj5sk5 жыл бұрын
What is that wire are u using
@cambofixing5 жыл бұрын
wire smaller 0.06mm
@shivappaspattanashetti34124 жыл бұрын
Please send link of screen
@FIXDPHONES6 жыл бұрын
You could have simply replaced the glass on this one by removing the adhesive and by doing so maintain the original digitizer. Both ways work, but it’s less work by cleaning the original digitizer.
@FIXDPHONES6 жыл бұрын
You also removed the force touch sensor at the beginning that runs around the frame under the glass and didn’t put one back in its place. You glued the glass directly to the frame.
@kiranh.a61952 жыл бұрын
Can tell Me you location
@j.gregquintero88446 жыл бұрын
what type of glue did you use to seal the face of the watch..
@cambofixing6 жыл бұрын
OCA glue
@coltenlowry12066 жыл бұрын
What thickness OCA do you use?
@MrRapmann6 жыл бұрын
Where i can get this for Series 3???
@altafkhan96916 жыл бұрын
Bhi amr smat watch apple ar copy ar touch broken hoya gasa ami touch koi pabo?
@cambofixing6 жыл бұрын
sorry sir I can't translate your word Can you speak English
@guitarporn87915 жыл бұрын
You didn’t put the clip over the connection. Can see the clip sitting next to your mat at the end
@Manish-bm5ik2 жыл бұрын
Display kahan se Milta Hai
@glosoulstaa6 жыл бұрын
What is that sticky pad called
@_adriannevarez6 жыл бұрын
Where did you get that adhesive that sticks the new glass to the digital screen?
@bashnalak6 жыл бұрын
That would be an important detail to include.
@tastytechaddictsmtb6 жыл бұрын
It's just standard oca sheet, just buy it for any phone and cut it to size
@agdarydeandrinua25086 жыл бұрын
Hola! Sabes como reparar o cambiar la pantalla rota de un smartwatch michael kors ? Por faaaa
@KalaiVani-iz3xk6 жыл бұрын
hi, do you repair watches in the United States?
@cambofixing6 жыл бұрын
No sir I'm from Cambodia 🇰🇭
@capt.chickenpilot3 жыл бұрын
Ok, I give up. but I will try
@XxdosisxX4 жыл бұрын
Para que usas la máquina? Extrae el aire de la pantalla ?
@MdBelal-us6yd3 жыл бұрын
Mujhey onlin pe chaiyea
@gulamsarwar93905 жыл бұрын
Friends iska touch kana milegaa
@gamingmasti50645 жыл бұрын
Bhai plz is glass ki purches link dede
@cambofixing5 жыл бұрын
can u write english sir
@gamingmasti50645 жыл бұрын
Give me this glass purchase link
@shahidsaifi89344 жыл бұрын
Ye touch appne kha se magaye thi
@shahidsaifi89344 жыл бұрын
Apna number de dena
@ngormchansopheaktra12294 жыл бұрын
I need to change apple, how can I do?
@ngormchansopheaktra12294 жыл бұрын
I need to change my apple watch
@altafkhan96916 жыл бұрын
Yes.my apple copy smart watch buy but my touch is broken and it not working so the glass touch how much price.I' m Bangladeshi so how much price how to sent the glass touch my smart watch in w88 not real copy
@tanyascaresom246 жыл бұрын
Hey hun. Just buy an iCloud locked watch and replace the screens. I baught 5 iCloud watches and 2 out of the 5 had no touch so it is a hit or miss but promise just try again with another. One is bound to work:) don’t bother with doing the digitizer only ok. This is a way easier way:) I do it a lot. And can’t explain why one would have touch and one wouldn’t but try again with another
@piotreksowa96795 жыл бұрын
whats name of this machine with holes
@hollyshields46104 жыл бұрын
Screen separator
@gauravsingh64986 жыл бұрын
please give me link to buy this screen...
@tanyascaresom246 жыл бұрын
Don’t do just the screen replacement ok cuz most are not programmed and you need an ibus tool. Just buy an iCloud locked watch on eBay and transfer the screens. It will be a hit or miss rather it will have touch and can’t explain why but I’ve baught 5 iCloud locked watches before and 2 out the 5 had no touch and can’t explain it but just do what I said n there will be hope:)
@varadbhoir64594 жыл бұрын
I have a A1 smart watch repering touch and bettery
@pedroolvera59242 жыл бұрын
no le puso el seguro de los flexores en una sacudida se van a desconectar
@fjeanjoseph6 жыл бұрын
wow! that was impressive - but I wont be doing all of that - Apple here I go again - buying another one
@cambofixing6 жыл бұрын
Jean Joseph if your apple watch break glass but still touch working do not remove touch digitizer from oled of i watch keep it as You could remove glass only then put the new glass
@angelcarvajal47625 жыл бұрын
@@cambofixing My watch has the cristal cracked but the touch and display still work fine, so what should I do?
@cambofixing5 жыл бұрын
you can replace glass only
@qizhang90146 жыл бұрын
you have broken force flex...
@Grumpy4016 жыл бұрын
Nice, all I need now is a "debubbling" machine :/
@JustShupp3 жыл бұрын
Get LOCA glue ;)
@artbygabe5 жыл бұрын
But I don't have a S-959P Laminating Debubblers One machine 6:23!!!!! Damn! I guess I can't do this.
@cambofixing5 жыл бұрын
if you don't have this machine u can use another machine type debbuble laminating machine
@pulinshah49515 жыл бұрын
Just use LOCA glue and you won’t need any machine
@YungEarl13 жыл бұрын
you destroyed the force touch cable
@cambofixing6 жыл бұрын
I order form china too it price 15$ touch 10$ glass only it
@stephondalton2366 жыл бұрын
iCase Service Center hey I have a series one i need to repair the screen can you help
@tanyascaresom246 жыл бұрын
Just buy an iCloud locked watch hun and transfer the screens. Do not waste your time on just the glass cuz most are not programmed. They don’t show that part in these videos. It won’t have touch unless programmed. Hope I helped
@adityazorroa76336 жыл бұрын
iCase Service Center Hi Im aditya, i have a apple watch serice 1 42 mm and that screen glass is broken. Can you fix that watch? If yes how much do u charge
@ivarsmatisons5 жыл бұрын
👍
@ShahidKhan-ch6ug4 жыл бұрын
Apple watch touch price series 2
@cambofixing4 жыл бұрын
75$
@ShahidKhan-ch6ug4 жыл бұрын
Apple watch Touch s2 42mm delivery price
@ShahidKhan-ch6ug4 жыл бұрын
My contact number+966537374828 WhatsApp
@solemantheman99085 жыл бұрын
👌👌
@varadbhoir64594 жыл бұрын
Hiiii
@ajaysahu81764 жыл бұрын
₹
@billlifechannel56316 жыл бұрын
ร้าน พี่ อยุ่ไหน
@Sarfubtrepair2 жыл бұрын
Bhai aap ke contact nomber milega bhai..
@jdizzle97664 жыл бұрын
All that work and time. Just replace the entire screen for goodness sake.
@Ramzo164 жыл бұрын
and cost 200 or 40?
@jdizzle97664 жыл бұрын
@@Ramzo16 Thats a lot of work to save $60 to $100.
@Ramzo164 жыл бұрын
J Dizzle it’s 300 for entire screen or just 40 his way...
@Ramzo164 жыл бұрын
J Dizzle you save 260
@jdizzle97664 жыл бұрын
@@Ramzo16 Sir, I just replaced my screen in my mother's Apple watch series 1 for $70 dollars. Its an easy fix that you can do yourself in about 30 minutes.