Applying decals to "scale out" my model airplane. Decals from Callie Graphics

No video

Applying decals to "scale out" my model airplane. Decals from Callie Graphics

Рет қаралды 1,491

Күн бұрын

EP 46 Adding scale markings the easy way
Adding the final scale detail and markings are probably the most fun part of finishing a model airplane for me. It's what gives the plane its own identity and often tells a story.
Featured in this episode:
Callie-Graphics.com
Contact with questions: Info@callie-graphics.com
If you have questions please add them in a comment below.
Tools and glues used in this series: affiliate links
Tacky Glue amzn.to/2YstUoW
Pacer Canopy Glue amzn.to/3FmSFUc
Dremel Cordless Rotary Tool: amzn.to/3z9shJb
Rotozip Sabre bit ⅛” : amzn.to/3EgmtkR
Sullivan tubing for tank interior amzn.to/3DpWXZW
DLE 30cc gasolene engine: amzn.to/36TFw4t
Starbond CA, order with this link to support my channel. www.starbond.c...
amzn.to/2Sc6KNr Razor saw and mitre box to make precision, straight, small kerf cuts
amzn.to/37yk4Bm sandable finish resin. This is the stuff for fiberglassing.
amzn.to/2vmW0Db 15 minute epoxy. Use for sticking stuff together, firewalls, landing gear plates, hardwood parts. Can be used with fiberglass, but you’re not going to like it. Not sandable.
amzn.to/2T0uhSB Scroll saw, the best tool of a scratch builder
amzn.to/36gTtI2 Master Airscrew Razor Plane
amzn.to/2uaV8Rt Black & Decker hand sander.
amzn.to/2Y93QL7 Magnets like the ones I used in this video
100 count, seems like a lot, but more is better when the project is big.
amzn.to/374eXsJ Master Airscrew Balsa Stripper, make your own high quality sticks from common balsa sheets. One of the most valuable tools I use.
Let’s get building

Пікірлер: 9

@marcobuonavita2757 8 ай бұрын

Un bel voto sicuramente ,10 , e interessante la lezione sul trasferimento dei decals , grazie Dan per il tempo piacevole del video

@Capgains7777 8 ай бұрын

Thank you for your kind words. I’m happy you like my videos, they are a lot of fun for me to make. And I love sharing tips and demonstrations to hopefully make building model airplanes easier for others. It’s very special when I get comments in other languages from people around the world making me realize how far our hobby spans and that we can talk about it. Thank you. 🙏🏻

@Capgains7777 8 ай бұрын

Grazie per le tue gentili parole. Sono felice che ti piacciano i miei video, sono molto divertenti da fare per me. E adoro condividere consigli e dimostrazioni per, si spera, rendere più facile la costruzione di modellini di aeroplani per gli altri. È molto speciale quando ricevo commenti in altre lingue da persone di tutto il mondo che mi fanno capire fino a che punto si estende il nostro hobby e che possiamo parlarne. Grazie. 🙏🏻. I hope this worked correctly.

@stevejones9044 4 ай бұрын

Leave the transfer paper on and remove when it's dry, hadn't thought of that! I have use callie- graphics a couple times now but always struggled getting the paper backing off before hand. I use the wet method as well and will for sure leave the paper on until dry. Thanks for that tip!

@FearlessDonut 5 ай бұрын

You think putting a piece of clear tape on the edges of the transfer paper would help the curling problem?

@Capgains7777 5 ай бұрын

Actually I liked the curling of the transfer paper because it meant it was letting go of the sticker. Sometimes it took a little longer, but the main thing was that even if it pulled up on the sticker a little, it was still aligned and just needed to be pushed down on the surface to be permanent.