APPLYING THE KIWIGRIP NON-SKID PAINT TO BOAT FLOOR DECK - FULL BOAT RESTORATION

APPLYING THE KIWIGRIP NON-SKID PAINT TO BOAT FLOOR DECK - FULL BOAT RESTORATION - PART 11

Рет қаралды 85,416

4 жыл бұрын

In this episode we paint the boat floor with a one part non skid paint!This stuff was a great product, so keep watching to found out how it turned out
:)
►Subscribe to the channel / Angry Mack Adventures / angrymackadventures
►MY Instagram: / angrymackad. .
▼MUSIC:
►EMAIL: angrymackadventures@gmail.com
▼SOCIAL MEDIA:
• INSTAGRAM: @ANGRYMACKADVENTURES
• INSTAGRAM HASHTAG: #ANGRYMACKADVENTURES

Пікірлер: 97

@jeffmurphy9987 10 ай бұрын

I used Kiwigrip on my swim platform approximately six years ago. Followed directions and it still looks like brand new. No chipping cracks or discoloration. It’s the best on the market.

@marineengineer2673 3 жыл бұрын

I used the kiwi grip to do the floor on a 24m vessel. We ended up troweling it on to get good thickness and gives it the ability to get more texture with the roller. We found if not enough was put on it would take the paint away as you saw. When creating the texture it pretty much just makes the ‘spikes’ into a bubble and we found over time, general wear and tear from foot traffic, caused these bubbles to tear and left little holes in the paint. Just needs a sand and re coat at that stage but well worth putting a thick layer on to get extra life out. It can also be diluted to do thin patch ups as it is water based!

@brockga1 2 жыл бұрын

Do you think it should take care cracks in floor, troweling it on to fill cracks? Floor is solid, but thank it's sun cracks. Thanks.

@EthanYeo1 4 жыл бұрын

Man it’s honestly so good to see your hard work paying off both with the boat and your channel!! You’re so close to 2k subs 😁

@AngryMackAdventures 4 жыл бұрын

Thanks so much!! so close man, looks like you are too my brother! thanks for watching :)

@RobBassMaster 4 жыл бұрын

Looks amazing my friend! The boat has come a long way. Blessings! 👍

@AngryMackAdventures 4 жыл бұрын

Thanks mmate legend 👍

@jeffreyodonnell1612 3 жыл бұрын

Straight to the details! Great video man. You know every project guy in the world rolls his eyes n skips the uneccesarry jibber jabber

@AngryMackAdventures 3 жыл бұрын

Thanks for watching mate, hope you learnt a thing or to!! 100%

@elvisshakey8867 4 жыл бұрын

Mack Attack

@FishTuckerMan 4 жыл бұрын

That boat is comming up really nice Nick! Great job👍

@AngryMackAdventures 4 жыл бұрын

Thanks dom your a legend👍

@CanoeingTheEdgeOfTheWorld 4 жыл бұрын

After watching a number of videos in this series I don't think the patch job I did on my fiberglass canoe was so great anymore. I was reading and rereading instructions on mixing catalyst hardener like I was getting ready to perform brain surgery and this guy rebuilds an entire boat! Nice videos. 🐊

@AngryMackAdventures 4 жыл бұрын

haha! thanks alot for your support mate means alot, glad your enjoying it!

@OutAllDay 4 жыл бұрын

Great production and video as always mate! From CA!

@AngryMackAdventures 4 жыл бұрын

Glad you enjoyed it thanks alot!!

@greatwhitesfishingadventur2273 4 жыл бұрын

Great insight into using the "Quickgrip" !! Name the Boat "Mack Attack" !!!

@SlapHappy 4 жыл бұрын

+1 for mack attack

@AngryMackAdventures 4 жыл бұрын

thanks michael!

@bahamasking2063 4 жыл бұрын

I like “Mack Attack”

@TheBoatProject 4 жыл бұрын

Another awesome video! ❤️

@AngryMackAdventures 4 жыл бұрын

Thanks again!

@Liquidforce7113 4 жыл бұрын

Angry Mack II. Good video mate!

@AngryMackAdventures 4 жыл бұрын

thanks mate! yeah that was the name i had in mind ha ha!!

@josztroutfishingdiary7350 4 жыл бұрын

Nice, Mack!

@AS-pq3hu 3 жыл бұрын

Nice work, what did you use for the interior sides?

@claytonm1089 4 жыл бұрын

Nice Job on 2k subs!!! Yeeewww!

@AngryMackAdventures 4 жыл бұрын

Thanks mate, its a great feeling!

@claytonm1089 4 жыл бұрын

@@AngryMackAdventures I was actually your 2000th sub 😉

@SlapHappy 4 жыл бұрын

Also, I've done lots of painting in my time. The reason it started lifting the paint off was because the roller was dry when you started! Looks like is still turned out good tho

@AngryMackAdventures 4 жыл бұрын

Great tip! thanks mate yeah i think that's what it was! nah after the 2nd coat turned out mint!

@ChadsGoneDiving 2 жыл бұрын

That looks great! How slick is it when it's wet?

@denniewhittemore5651 2 жыл бұрын

Looks great mate.

@AngryMackAdventures 2 жыл бұрын

Thanks a lot mate

@brettphillips4754 4 жыл бұрын

Great work Mack! My first boat was an 18’ Voyager too. The best all rounder! We named her Roxy - as in Foxy Roxy (sexy lady). Also super surprised to discover your in Perth too. Hopefully see you on the water one day on the girl.

@AngryMackAdventures 4 жыл бұрын

Very cool! thanks mate

@TheLuukie09 4 жыл бұрын

love your videos!!!

@AngryMackAdventures 4 жыл бұрын

thanks alot mate!

@elvisshakey8867 4 жыл бұрын

Love the videos:)

@AngryMackAdventures 4 жыл бұрын

Glad you like them! thanks for the support

@DIGOLOGIST 4 жыл бұрын

I am restoring a 2000 Bayliner( first boat) and I pulled out all of the crap carpet to Gel coat everything. Can you tell me, should I Gel coat the Deck before applying the Kiwi Grip? Thanks .

@MrMatt30987 2 жыл бұрын

Do you seal that paint with anything or is that the finished article? I have done something similar on my boat and just from walking on it, with clean shoes, I have dirt and marks all over it, its not been out of my garage yet! I opted for white and it shows everything

@anonymouse527 3 жыл бұрын

I have a question. Could I use this type of paint on a metal tube frame that's meant to be pushed around? Is this paint rubbery or hard like epoxy? Do you think it would it stick well to metal?

@MarcAcetone4x4 4 жыл бұрын

The Boat is looking fresh as mate awesome job 👌 Oh and what about Big Mack or Mack Daddy for names

@AngryMackAdventures 4 жыл бұрын

thanks mate!!

@johna3530 2 жыл бұрын

Mack. John here , im in vic , how are you . The kiwi grip is good enough for us to paint our old fibreglass floor too, is it easy

@kenlarkin6380 2 жыл бұрын

Boat name: Wholly Mackerel

@ct026 3 жыл бұрын

Subbed mate. (UK). 👍🏻👊🏻

@pickinpop 10 ай бұрын

Hi, so 3 years now and has it held up pretty good?

@302Camaro 2 жыл бұрын

My boats surface already has the diamond pattern non-skid molded in. I do want to paint it but not so sure if using a paint with texture already mixed in such as Kiwi is the right product to use. Any thoughts?

@AngryMackAdventures 2 жыл бұрын

I think that’s will need to be sanded and re painted in gel coat mate. :)

@leapsabove5660 4 жыл бұрын

grumpy mack happy mack mack chat , flat chat

@AngryMackAdventures 4 жыл бұрын

@raybuttigieg1343 3 жыл бұрын

Am considering applying the KiwiGrip to my CruiseCraft deck. How does blood wash off the KiwiGrip surface?

@AngryMackAdventures 3 жыл бұрын

Hey ray it’s not bad, it gets dirty very easy, thinking of applying carpet, thanks for watching :)

@gregorycox4578 4 жыл бұрын

lazrith would be a good name because you brought it back from the dead

@michaelfrancis8085 11 ай бұрын

Lazarus

@kishidabu 2 жыл бұрын

So one year on are you still happy with it? I’m thinking of doing the same thing

@AngryMackAdventures 2 жыл бұрын

Hey mate, i decided to change to carpet for a more welcoming feel. Since then boat is now sold. It was a product that got dirty quick and hard to clean! But did stay on, nice and strong :)

@Mohamad-zk3vr 3 жыл бұрын

How rough was the sanding paper?

@AngryMackAdventures 3 жыл бұрын

Hey mate, i used around the 4/500 Mark :)

@theshackattheback1877 3 жыл бұрын

MacAngry

@nedkelly8633 Жыл бұрын

Crankin for boat name

@patrickgranado2716 3 жыл бұрын

Is it soft to walk on barefoot or is it rough? I've got kids don't want them ripping some skin off after they get out of the water, thanks in advance

@AngryMackAdventures 3 жыл бұрын

Hey Patrick! No not rough at all, kids will be fine :)

@patrickgranado2716 3 жыл бұрын

@@AngryMackAdventures Thanks a whole bunch I appreciate the info

@prismaticspiral 4 жыл бұрын

"Passing Wind"

@Bullwolf1965 3 жыл бұрын

Name it Mack Daddy

@aidanrolls8201 4 жыл бұрын

get some good seats so when it is rough it takes alot of the impact

@AngryMackAdventures 4 жыл бұрын

boat come with new seats, but something to think about for the future thats for sure!

@frankjgornickjr3676 3 жыл бұрын

How much money and how many hours have been spent to fix this boat?

@AngryMackAdventures 3 жыл бұрын

Hey frank i have a full video in depth on this if you want to check it out :)

@AussieRic 3 жыл бұрын

U wanted a boat name.. Grippin Fish

@ossstozzz4871 4 жыл бұрын

Wassup

@elvisshakey8867 4 жыл бұрын

salty cowboy

@seangriffin7668 3 жыл бұрын

What kind of boat is this?

@AngryMackAdventures 3 жыл бұрын

Hey Sean, its a Voyager LTD (made in Western Australia) great boats

@Dez2891 3 жыл бұрын

What'd you use for the undercoat? This is exactly what I want to do!

@AngryMackAdventures 3 жыл бұрын

No undercoat required :)

@TurfSurfer 3 жыл бұрын

How is it holding up ?

@AngryMackAdventures 3 жыл бұрын

changed to carpet :')

@TurfSurfer 3 жыл бұрын

@@AngryMackAdventures lol was it because it was bad or just a cosmetic thing ?

@AngryMackAdventures 3 жыл бұрын

@@TurfSurfer it just always looked dirty and hard to clean so I decided to replace with carpet, much nicer look and feels great to the feet 👍🏼

@TurfSurfer 3 жыл бұрын

@@AngryMackAdventures thanks for the review! Enjoy the carpet!

@TheDtrolinder 3 жыл бұрын

Lisa Marie

@johna3530 2 жыл бұрын

Cheere

@bullykuldo6233 4 жыл бұрын

Take a letter of each of the people that worked on the project and come up with a name

@AngryMackAdventures 4 жыл бұрын

that wouldn't be a bad idea :P

@SlapHappy 4 жыл бұрын

Hey man I just noticed you subbed, cheers for that! If you want to use some of my beats in your videos, feel free. All of them are free for non profit use :)