"2 things trying to get in one hole, which is disgusting". This statement earned my support and subscription. Well done.

This guy is sharing gold nuggets left and right... takes years to learn this stuff for the average joe... Good job man

Shot over 1000 on a ruger 556 ar 15 then had a jam up, could not pull charging handle back or place the gun on safety, Instructor easily grabbed the charging handle and slammed the butt of the gun against the table and bullet came out. they teach you gun saftey how to stand how to shoot, reload, and which kind of ammo to use. Not once did they show us how to take care of that kind of jam up on the ar-15 rifle. People should get a class on handling jam ups by all means

All they ever taught us in basic was tap n rack. Very informative man, my biggest fear was going to clear a malfunction and the charging handle not budging. Much more confident with my rifle now, and I can’t wait to train these techniques

Amazing video, I'll keep this knowlegde in mind! Just had a malfunction with my AR-10 where a live round got stuck in the chamber and would not eject - from this video, I now know it was because the cartridge itself was somehow bent. So I had a live round stuck in the chamber, and the BCG refused to go back, so I couldn't eject it. I can tell you right now, I tried mortaring the dang thing to no avail, this round was not coming out no matter what. Had to bring it to a gunsmith, I told him my woes. Man got him and his bud, and they had to use a brass punch and hammer to literally punch the BCG to the rear so they could get the round out (they punched it via the face of the BCG exposed by the ejection port). The smith said it was the hardest BCG he had to unjam, as the BCG refused to move until he gave it a good strike. The gunsmith surmised the cartridge was the issue, not the BCG like I initially thought. The BCG seemed fine and operational, and the chamber seemed to be undamaged. Upon inspection, the primer had been lightly sturck, but not enough to cause it to go off. The cartridge also had the smallest knick in it, which I assumed caused just enough deformation to the brass cylinder to lodge it in the chamber - though I also suspect this knick may have been caused when I initially racked it. Bought 500 rounds of this ammo, been through maybe half of it, and this is the only issue I've had so far. This happened quite recently, and I am eager to test my gun out soon to ensure it was the round and not the rifle itself. Whatever the case, I've added a brass punch set and hammer to my kit in case such a catastrophic jam ever happens again. Hope this never happens to anyone else, but just so you know...

Dude? You literally CAN NOT beat this block of instruction.👉🏻🤔🧠💥

Do you guys want specific videos on each malfunction?

I’ve had ar15’s for years and damn it, I just learned so much in this video that I didn’t know. Thank you!

I swapped from old ammunition to cleaner brass and my mags suddenly would allow the brass to chamber. Then I could safely reset it after a brass over brass. This video saved me so much stress. God bless brother.

I admire your professionalism, devotion, and commitment to Teach. You should be paid well. It's not easy learning your skills.

Great skills and vid!! Particularly loved the "two things in one hole is disgusting" comment, and agree whole heatedly.

Excellent video on causes and fixes for AR-15 firing malfunctions! Keep 'em coming!

Hey, man. Been watching your videos for about a year now. I really appreciate the pragmatic approach you seem to take. I know your page isn’t huge right now (although being in the thousands is no small feat) but I really hope you keep making videos. I see alot of pages quit at around 5k and I hope you continue to make great content. I sincerely think you would bring plenty to the table for the community! I would be interested to see a video on stock style and design, and your thoughts on applications for them. Thanks for reading all this, if you have!

Took a friend shooting and they didn’t realize they had a double feed, I’m not sure if the bolt broke before or after, but the second round that fed is actually what hit the primer and fired off the round ahead of it. Glad nothing worse happened there!

Hey there just got my first AR15 and while I have several guns I don't have anything like this! I found your video accidentally while searching for a cleaning vid. Not gonna lie, jams are my biggest fear! I REALLY REALLY appreciate that you took the time to make and post this particular vid and I will definitely look for more from you - anything that helps me become 100% comfortable with operating and troubleshooting my firearms makes my day!

Man you saved the best for last " blown primer cup" getting wedged back underneath the carrier group and or under the safety . Had a case of Winchester 5.56 "White box " that had almost 20 rounds that caused this. It would cause the class to completely stop while I tried to deal with it . Learn to practice with malfunctions , it could be a game changer. G. Speight

Very good explanation with detail and safety all packed in. You just earned yourself a subscriber. Keep doing what you’re doing 💪🏼

amazing video .. been researching how to run z above and even after watching hundreds of hours on the topic I still enjoy coming across someone who knows their profession. thank you for sharing. subscribed !

Absolutely priceless bits of advice learned thru trial and error. Thanks for passing on your hard earned knowledge. Carry on...!

Thank you for these suggestions and best practices!

good training sir, straight forward, no b/s

Outstanding intel in this content!! I have a Marine Corps buddy, who was a force recon sniper. I am new to the AR-15 platform and this information is possibly life-saving - so thank you again so much. Thanks for your service. Semper Fi.

Very informative, man. At first, I thought my bolt carrier was defective. This helps a lot for a newbie like me.

Just got my first AR just wanna say Thank you for demonstrating for leftys 😅

Great explanation!

Just stumbled on this... you're knowledge is awesome and you delivery is hilarious 😂

Excellent demonstration sir . I needed a quick refresher of what to do when jamming comes to my AR15 . I was taught how to unjam the rifle in U.S. army basic training and in army units I served but it has been 11 years since I’ve handled or fired an m16 a2 . I just got me one two days ago. Thanks once again for your time and effort. Keep up the good work. Hello from Texas

Every new AR-15 owner should watch this video.

i watched your video till the end.great video . I built my first ar 10 first round would not allow me to pull back bolt. Tried your style to clear stuck round worked great !!! I was so glad no tools had to be used to pry it out . THANKS FOR HELP

Good vid, the only thing I'd contest is a double feed is really easy to visually identify after it didn't go boom and racking can make the problem worse. In my humble opinion and how I do it is drop mag, which will often drop the issue ammo, rack to further clear, insert, charge.

Thanks for the great info !

nice work, ranges won't be thrilled with this vid . . if viewers watch and retain, how to manage these common malfunctions, they will have saved about $300.00 unnecessary spent dollars for the safety course. this vid allows gunners to show up and have fun, without worry on what to do if ?

Glad I came across this, very helpful; a good study to be prepared. Another good reason to have a good back up pistol like a Baretta 92 etc.

Newbie here, thanks for the video very helpful and informative and easy to understand. Thanks buddy

Great vid man, having a jam issue with mine right now and just trying to get all the info I can to fix quickly if it continues to happen. Thanks for sharing your knowledge, subscribed!

New sub great content thanks for all your hard work.

Outstanding brother

A paint can opener works great to pull the bolt back in order to not use the charging handle, and it's used to clear a casing stuck in the chamber

Thank you Marine. I haven't touched an AR since I ETSd in 06. I literally had the first two malfunctions happen the first day I ran rounds through it. It's a Windham so it's a decent weapon. I managed to clear them both.

Great video. 👍

Thank you bro! Damn good tips!!

I would like to say I learned a lot f😢you I was a police officer for around 3 years and got pretty proficient with my service and carry gun, but ther😢was not a lot of need for Ar15 . I decided to finally buy me one so I hope you continue to upload quality videos to help teach me. Keep up good work your not drab like so many others I’ve heard, I did subscribe.

Would you be doing anything with AK’s? Your video on the ZPAP sold me on that one and I’ve been watching your AK, and safety vids as I’m a new shooter. Thanks!!!!!

Great video man. Thank you. Would love a course if you’re ever in Fort Lauderdale

Thanks for the info

Extremely helpful was able to unjam mine no problem

Thank you, thank you, thank you. You just helped an old Marine. 😂

Excellent content.

Great presentation

hello, Thanks ! very instructive and pragmatic video... Well done ;-)

great video

Hell yeah!🤙

Thank you sir this happened when I was hunting you are a life saver

Great video for a novice AR user.

Great great video this is your best video

Hey you jar heads aint so dumb...LOL....LOL.....Great video....A+.....RLTW.....Keep up the good work....

Head below the muzzle sounds like excellent advice! Content fantastic. Lighting abysmal.

Thank you

What I learned from this video:🤔 "Loosey-Goosey, 2 things trying to get into 1 hole, disgusting!!!"

Very good Video

Cool..!!!!!! One of the best videos I've ever watched....

In the last two weeks I have had brass over bolt. Both times bad enough I had to remove my stock. It is possible that is the worse failure I have ever seen. And folks I seen a lot as an Armorer, Arm's room NCO and Master Gunner as a Blackhawk crew chief in the Army. I could have only wished my two brass over bolt were so simple to remedy. L.W.R.C. upper M-6

Great info thank you so much! My m&p15 sport ii ya ya I know but it double feeds or gets stuck or failure to fire after reinserting a new mag after a dump mag. Is it the ramp or just need a good cleaning? Should I contact S&W it’s only two years old and maybe 300-500 rounds through it.

I Definitely learned a lot from this video I didn't know before wanted to say thanks for the info and for your service also wanted to mention the first time I shot my ar 15 when I got it the firing pin broke on the tip threw my first mag pull threw it I didn't know what was going on thankfully my cousin was with me to inspect it because I wouldn't of known what to do I believe my firing pin was a tad bit to long being new to going to the range didn't help with that but it snapped right at the tip of it due to bad quality of the firing pin the company I ordered from sent me two brand new titanium firing pins and I was grateful for that free is nice

Thank You for the video. I learned I should Buy a Scar or Bushmaster ACR.

ive had a case get stuck in the chamber once at the range. the extractor somehow slipped off the rim of the case, and the bolt was free. but i couldnt get the brass out since i was at the range and didnt have a rod on me or in my range bag. (it was a brand new gun, first time firing it, this was about the 3rd magazine) so i packed up and headed home. as soon as i got home about an hour later, i grabbed the gun and pulled the charging handle back, and the brass went flying out. it blew my mind. i thought i had made it all up for a second. lol. but the only thing i can think of is that the brass might have been defective, and the heat caused it to expand, and stick, and by the time i got home it had cooled down and just came right out. thats the only thing i can think of that happened. since then its been running perfectly fine. with no malfunctions and great ejection pattern.

Great video! I've been having a lot of jams with my fairly new Sig M400 (it's about 2 months old, and about 1000 rounds through it). I've had jams since day 1, and I don't know if it is the gun, the mags, or the ammo, but it has happened with new ammo, factory reloaded, home reloaded, and 4 brands of mags. I got a new nickel BCG to see if maybe the bolt and/or carrier were doing it, but nope, more of the same. The jams almost always need to be mortared to be cleared - zero BCG/handle movement. This is what brought me to your vid - any ideas on what may be happening or how to fix, or what to alter, or what to replace? I assumed the ammo was the problem since the majority of that 1000 rounds has been reloads, but there was about 400 rounds of new ammo with the same thing. Thanks!

Good sfuff.

You can also mortar it with one leg but that is mostly with a collaspable stock.

I keep getting failure to extract before new round feeds out of 7.62 7.5 inch BCA upper. Do you think is a gas block issue?

You can also use a paint can opener 👍

I've had to force my brass out before and I was scared AF. 😱

Freaking awesome video man, clearly explained and straight to the point.

New to your channel great intel 👍 I am Ret ARMY AA🇺🇸 82nd

People that don't know how to take remedial action on the AR in case of malfunction means they are not trained and/or they put the weapon together correctly.

Muchas gracias por los suptitulos es de mucha ayuda

This tutorial video are extremely helpful.. because Im in the [REDACTED] National Army's Territorial Paramilitary Unit, and our standard issue 're old M16A1s ...

I had bolt over brass once I mortared it.. was a empty casing... I had a couple double feeds I take maG out clear gun reload... I hate doublfeeds only had 2.(between ar10pistol 12.5” aero, and buddys 5.56 carbine 16”) I had fte like 10 times no fun but easier (aero 308) idk if it’s gas issue or bcg or buffer :( just ordered stag m4 in mean time

Pause at 4:51 and check out the smoking barrel!

I keep getting failure to extract before new rounds feed out of 7.62x39 7.5 inch BCA upper. Do you think it's a gas block issue

What do I do if the brass is stuck above the bolt Carrier but under/stuck by the silver firing pin??? Helpppp please do i have to dissemble or will one of these methods work?

I get how to clear dbl feed but what to do to keep this from happening again

On my ar pistol the round is stuck like a failure to feed stuck sideways and the charging handle pulls back and forward loose but the bolt is stuck with round jammed up in it idk what to do

What if you live in the people's republic of California and you have a mag lock system on your ar? Any help would be much appreciated.

One problem I've run into is a round fully in the chamber, and a second getting stuck partially in the magazine, too stiff to push back and into the mag, but far enough into the mag that it keeps the magazine from ejecting. I have to partially disassemble my rifle with the bolt back and fiddle with it until I can get the bullet from the mag and eject

I've had to mortar my new AR several times with different ammo. Is there anything else that can cause the charging handle to get stuck aside from expanded brass stuck in the chamber? I would guess this problem is more common with reloads. Can there be anything wrong with the rifle that can cause it? It's happened with two different brands of ammo and I've only owned the gun about three months.

I recommend watching other videos about how to clear your malfunction. Too many things left out in this video. You are completely ignoring that you should always check what malfunction are you dealing with by turning your rifle the opposite way, to get a look on the ejection port. The right way is to first do that, and then decide what to do next based on what you find out. Your way will make many malfunctions worse than they were. You can not clear double feed or failure to extract by just tap and rack. I mean, you may, but there is a big chance you will make your situation much worse. If you inspect that your bolt is not closed/open all the way(does not matter for what reason), you have to find cover, eject magazine, rack it hard and then insert magazine after inspecting that malfunction is cleared.

Which ARs can you put on Safe with the hammer decocked?

Any advice for people in NY with fixed mags.

Thank you!

Did an AR pistol build getting two and three shots on a single trigger pull was told that it could have something to do with the disconnect and possibly the spring being inserted in upside down but that's not the case. Replace trigger problem still exists?? What could be causing this

What kinda flashlight mount is that?

.5 seconds In and I already haft to say that your beard is bad*ss

Hard "taps" to the bottom of an AR mag will frequently cause double feeds.

Would you use that screwdriver in a firefight?

What kind of multi tool do you prefer?

I also have double feed problem with my M4 but I don't understand why this is happening Is it a magazine problem or an ejector issue can someone help me please to understand what problem is with my rifle 😔🙏

My ar once cocked will fire once but I have to cock it each time I fire...how can I fix this Issue? I can't fire fast..only one at a time...

I've got a PSA AR15 16 rifle that cycles 5.56 fine. But, has issues feeding 223 consistently. Any suggestions?

👍