Sometimes you need to replace the bearings. I took the time to video the process in case you need to do this to your chipper. Mine is a 250 Bandit from 1997. Yeah, my stuff is old (like me!)
Пікірлер: 133
@arboristBlairGlenn5 жыл бұрын
I don’t expect this video to get very many views but for those of you who may need this information, I hope this helps.
@vc71283 жыл бұрын
Thank you for uploading the video. I am sure that I am not alone when I say this, you have at least helped me. BTW, what grease do you put in the bearings? Thanks.
@fgfra3925 жыл бұрын
Our Vermeer's bearings went out not 12 hours ago, what great timing on the video Blair, Thanks!
@arboristBlairGlenn5 жыл бұрын
Mason Tompkins every chipper is different. Hope this helps
@fgfra3925 жыл бұрын
@@arboristBlairGlenn There is few differences I noticed but a lot is quite similar, this for sure got me on the right track.
@arboristBlairGlenn5 жыл бұрын
Mason Tompkins 👍🏻
@merlenelson48946 ай бұрын
About to replace Bandit bearings on the opposite side of disc chipper. I let the bearing cover fill with excess grease over the years and it eventually prevented rainwater from draining out a crack in the bottom. Water and grease churning and soon enough I had a bearing failure in only 700 hours of use. Thanks for taking the time to document your process.
@arboristBlairGlenn6 ай бұрын
Not an easy job but very doable. Randy was a master at all things chipper. Sadly, he passed away last year.
@darrenswoodworks8695 Жыл бұрын
Where were you 15 years ago. I had to do the same thing. Took me 6 hours to change mine. Similar disk chipper, same bearing and clutch set up with belt. My Machanic used a cutting torch to cut it loose. He didn’t even scare the shaft. He was an amazing guy. Sorry to have lost such a good man so early.
@gergarcor Жыл бұрын
Thank you very much for uploading your video to the net, because thanks to it, I was able to give myself an idea to solve a problem with a machine that uses a similar bearing. Greetings from Acapulco Mexico.
@duke60242 ай бұрын
Keep that mechanic he is gold. Thanks for share i just bought used DR 18 HP vanguard watching videos learning thanku wow the sucker lock in on u
@arboristBlairGlenn2 ай бұрын
Sadly, Randy died last year of a heart failure.
@duke60242 ай бұрын
@@arboristBlairGlenn I just saw your video first time today sorry for your loss he was good blessings sent
@deerhunter74825 жыл бұрын
Goggles and a face shield didn't slow a broken zizz disk from giving my acquaintance a hatchet size slash on the forehead that any Indian would be proud of , Blair keep paying your great mechanic .
@arboristBlairGlenn5 жыл бұрын
Mike Redding he is 65 and I hope he wants to keep on working
@deesestrees5 жыл бұрын
Mike Redding lol Almost scalped by savage piece of disk!
@arboristBlairGlenn5 жыл бұрын
Deese's Trees CRAP!
@thardyryll4 жыл бұрын
Mike Redding But those goggles and shield could well have saved his sight if the disk fragment had gone south. A scar is one thing; blindness is another altogether. Doing without protective gear does not mean you will be injured. And protective gear is never a guarantee against injury. But it stacks the odds in your favor. Deafness, blindness and limb loss or worse don’t signify that you are macho tough, just pathetic.
@daviddesilva49715 жыл бұрын
Well done...bring in the man of wisdom. A lifetime experience.
@arboristBlairGlenn5 жыл бұрын
David de Silva Randy is the man!
@JonathanKnighton9615 жыл бұрын
Nothing like having a good mechanic that you can trust to do the work and get it done right.
@arboristBlairGlenn5 жыл бұрын
Jonathan Knighton so true
@jwparadise37944 жыл бұрын
This is an awesome and priceless video. Thank you for sharing this wealth of knowledge on this procedure for the Bandit Chippers.
@arboristBlairGlenn4 жыл бұрын
JW Paradise hope it helped. I only wish I had something like this to watch the first time I struggled with this.
@TGCIII5 жыл бұрын
I’ve got a 95 bandit 250. It’s awesome but finding somebody that Knows these machines is tough. I just grease and grease keep the knives sharp and hope for the best
@arboristBlairGlenn5 жыл бұрын
TGCIII these machines take a beating
@TGCIII5 жыл бұрын
No kidding they just keep on working. I’m holding my breath... I know it’s coming hopefully not today
@RickF15584 жыл бұрын
@@TGCIII Chippers are not very overly complicated machines. Instead of worrying if it will break down, take some time after work to just look your machine over thoroughly. Get to understand how its all put together and how it all works. That way when it does meed repaired, you can do it yourself. Maybe some people are just more mechanical. These things come very easily for me. God bless and stay safe
@alexmatthews23324 жыл бұрын
They really are simple machines but how they are designed is the amazing part. Had to change bearings on my bandit 100 and that was tough! Have some old school mechanics I'm cool with and we got it done. Trick is keeping the disc at proper height while working
@AuMechanic4 жыл бұрын
Just replaced a new Logan hydraulic clutch on a Rayco RC12 chipper as well as knives, anvil and other stuff. I measured the shaft stick out too before refitting the split taper pulley on the engine end but on refitting I used a straight edge and found the pulley not aligned so well from the factory so fixed that, poor alignment could wear out a belt sooner. Tip on removing any bearings, you don't need to cut the race all the way to the shaft, just close to it is good enough since the bearing races are hardened a decent blow with a cold chisel in the split with a heavy hammer will crack the bearing at the cut releasing tension on it.
@arboristBlairGlenn4 жыл бұрын
AuMechanic agreed that Randy cut too far
@chasingwaves11 Жыл бұрын
That has the same setup and the Bandit 200 and looks like the same belt too ! Lol that belt today is 700.00 bucks !! I just replaced one in November some idiots didn’t clear out the chipper and when the next guy went to go use it the chipper was half filled and wet wood chip’s jammed the wheel. Causing the belt to burn up and pretty much the belt broke .. idiots that don’t check anything before running it ! .. I’m so glad I started my own business can’t wait to go on my own , I’m down working for dummies it’s killing my brain cells lol
@arboristBlairGlenn Жыл бұрын
I wrote an e-book for folks like you. I thought about all the mistakes that I made over the years. Not a difficult book to read. I believe you would find value in this. I’m new to this Etsy store. My daughter just put it up for me. I have not even mentioned it yet. www.etsy.com/listing/1366947524/ Blair
@12namleht5 жыл бұрын
Old school skills...Go Randy
@88SC5 жыл бұрын
I fix my cars, mowers and most things around the house. While I seldom really hurt myself, it’s a rare project where I don’t see my own blood at some point. Watching a mechanical whiz like Randy do it, I don’t feel too bad!
@arboristBlairGlenn5 жыл бұрын
88SC he didn’t even know he was bleeding
@badgergearcompound7385 жыл бұрын
Haha. I think Randy’s “fur” acts as his arm protection, almost. I’ve changed many bearings like this in different applications (large cooler fans for natural gas engine/compressor packages). Wow! Over 20 years on that bearing. Obviously the guy that owns that chipper must maintain it above and beyond man. specs. Lol. Always interesting. Thank you for all your posts. Cheers
@arboristBlairGlenn5 жыл бұрын
Badger Gear Compound grease grease and more grease!
@badgergearcompound7385 жыл бұрын
arboristBlairGlenn Copy that. Didn’t take me long to realize you take care of all of which you run. Old iron is good iron. Haha
@arboristBlairGlenn5 жыл бұрын
Badger Gear Compound yeah but we work our stuff HARD!
@deesestrees5 жыл бұрын
I have one of those good secret mechanics as well. Im getting my bearings Replaced on the front of my bandit stump grinder currently. I really like bandit products. I’ve used all of the main brands and many of the models in 18 years in treework. Bandit and stihl make some great products, That’s where my money goes anyway and I’ve never been disappointed. Thanks for the videos .
@arboristBlairGlenn5 жыл бұрын
Deese's Trees I’m with you but I went with Carlton for my grinder
@jaxturner72885 жыл бұрын
Couple hundred for the part? Must of sourced that through the local dealer because shaft bearings like that are “off the shelf parts” and almost never made by the equipment manufacturer. If you can measure the shaft OD and know how many bolts hold it on, you can get ANY size and mounting combo imaginable for way way less. I’m guessing that looks about like a 2 inch shaft, possibly 50mm, obviously it’s a four bolt flange, obviously sealed on both sides/no grease fitting. When I put those specs in on eBay you find a two pack, in that same green color for $75. Like I said bearing people make bearings and the industry is very standardized, that’s why you only need a few specs to get the part, you don’t need to worry about the bolt spacing/ mounted height/max load/ max rpm because they are all standardized for whatever size shaft and bolt pattern your working with. Just type -sealed bearing for 2” shaft (or whatever yours really is) four bolt flange, in on eBay and bam your see your part.
@jaxturner72885 жыл бұрын
Edit: just noticed the grease fitting so don’t put “sealed” in your search.
@thardyryll4 жыл бұрын
Jax Turner This is exactly right. Ditto for related drive parts like pulleys. I needed a pulley for an older John Deere commercial mower deck. The factory no longer sells the part. Good thing, too: That set me on a search for a pulley from other suppliers. Found one - at a price no doubt far less than what one in a John Deere box would have cost.
@alanshelby59804 жыл бұрын
These belts and bearing blocks are cheap on ebay. Good job of making this last 20+ years. Use anti-seize or Loctite on everything you put back together.
@kenttom85355 жыл бұрын
everyone needs a Randy
@arboristBlairGlenn5 жыл бұрын
KENT TOM yes we do
@gregbrown92715 жыл бұрын
Nice job Randy 👍👍👍
@arboristBlairGlenn5 жыл бұрын
Greg Brown he’s amazing
@JustMe-gw3eo3 жыл бұрын
Randy is a badass.
@arboristBlairGlenn3 жыл бұрын
Yes he is
@traviswalker68312 жыл бұрын
I’m doing this very job. Thank you!
@arboristBlairGlenn2 жыл бұрын
Hope the video helped. Sadly, Randy died not long after this.
@traviswalker68312 жыл бұрын
@@arboristBlairGlenn I’m so sorry to hear about Randy. Sounds like he was a good friend and talented mechanic.
@arboristBlairGlenn2 жыл бұрын
@@traviswalker6831 thanks, yes. Life is fragile. Don’t take anything for granted.
@kencanoe4 жыл бұрын
Thanks Blair, you always have useful info...and I learn from the comments section as well! One question: How will I know when I need to replace the bearing(s)? THanks
@arboristBlairGlenn4 жыл бұрын
kencanoe I heard it clearly. You can also feel the change if you put your hand on the bearing housing when it’s running.
@wansolve2898 ай бұрын
Just came across this 4 yr old video, can you post where you found those replacement bearings? My old chipper will soon need some. Thanks !
@arboristBlairGlenn8 ай бұрын
I ordered mine through Caline equipment in California. 1 (925) 443-6432. Good luck
@briankirwan95885 жыл бұрын
Love your videos! Do you still have the original clutch?
@arboristBlairGlenn5 жыл бұрын
Brian Kirwan no, many times a clutch replacement
@GKfromNJ4 жыл бұрын
Hey man, awesome video! On the rear bearing, is it supposed to be flush with the shaft? We replaced it and the bearing is sticking out about an inch and a half
@arboristBlairGlenn4 жыл бұрын
Greg Kramkowski don’t understand your question
@dahlfishhydrolysate87804 жыл бұрын
Great Video Blair ! I have a Badger TM400 that needs new bearings and I was wondering if you measured your old to source universal bearings or you might have the part numbers ? I'm gonna tear mine apart for new belts and bearings here soon. Thanks in advance !
@arboristBlairGlenn4 жыл бұрын
Dahl Fish Hydrolysate most bearings are not unique to the machines and can be found at a bearing supply business. I found mine at one.
@GenghisKhan3113 жыл бұрын
My bearing for morbark with 2in shaft 4in bolt centers is 500 from morbark and 700 anywhere else.
@pandvsims5 жыл бұрын
More trees Blair! Chipper needs a paint job.
@edmioz3 жыл бұрын
excellent video !!! thank you so much
@arboristBlairGlenn3 жыл бұрын
Hope it helped
@sirvashasar2 жыл бұрын
nice video! i have a question, did u try a bearing pulley tool before you started to cut the bearing? seems like u had some space atleast to get the tooths behind the bearing. i have the same problem, big flange bearing stucked to the axle and i cant use the bearing pulley because i cant get the pulley tooth behind. im gona try cut some grooves with the angle grinder in the casting unit of the bearing and try to pull it from there, if that don´t work i will cut the whole bearing as u did=) thank you!
@arboristBlairGlenn2 жыл бұрын
The mechanic said, “tried them, too hard, just cut it off. Get it done!”.
@sirvashasar2 жыл бұрын
@@arboristBlairGlenn okay, yeah ill get it done tomorrow, thank you!=) cheers
@GenghisKhan3113 жыл бұрын
Video definitely helps thanks
@63256325N5 жыл бұрын
Thanks for the video.
@jonathanmohabir60143 жыл бұрын
Hey brother, there's Sum called bearings puller, had the same problem. I use to weld mine outside so it can expand thr race. But then found a bearing puller.check it out. It's a 3 arm puller
@arboristBlairGlenn3 жыл бұрын
Tried it, nope
@JohnSmith-kz1ll3 жыл бұрын
Great video
@arboristBlairGlenn3 жыл бұрын
Hope it helps
@k1ngzreign3363 жыл бұрын
What would you do if there's no way to fit angle grinder to cut the race ?
@arboristBlairGlenn3 жыл бұрын
Is this an issue you have or an open question? What kind of chipper are you dealing with?
@darrengarlough51213 жыл бұрын
I need to replace mine on bandit150xp, but its on the other side of the wheel. Will that beeasier?
@arboristBlairGlenn3 жыл бұрын
Should be similar. My 250 is basically just a larger version of the 150.
@Fennecfox103 жыл бұрын
I am replacing a bearing that pivots with one that doesn't. Is this okay?
@arboristBlairGlenn3 жыл бұрын
Ask the manufacturer please
@CryptoAbe4 жыл бұрын
Idk if you could help me with this 1989 Timberwolf 2000 chipper. I cant even find any bearings for it. The shaft is 3inch.
@arboristBlairGlenn4 жыл бұрын
Zach Bow don’t know that chipper but you will likely find it at a bearing supply shop. Most of these components are not unique to the machine.
@howorthpools73223 жыл бұрын
how do you know when it is time to replace bearing do you replace both sides when you do it
@arboristBlairGlenn3 жыл бұрын
Mine started making noise and I could feel them getting hot. Both at the same time, yes. Like replacing one tire.
@barryhansen68545 жыл бұрын
Each to his own trade is all Ill say gets done quicker.
@arboristBlairGlenn5 жыл бұрын
barry hansen Randy said “you do the trees, I’ll do the machines”!
@barryhansen68545 жыл бұрын
@@arboristBlairGlenn I agree Randy.
@Doc6074 жыл бұрын
Okay didn't measure the shaft protrusion and now the chipper wobbles. Best way to line it up please. Thoughts???
@arboristBlairGlenn4 жыл бұрын
Shane Nikorous the mechanics at Cal-line are helpful
@Jamestreeman4 жыл бұрын
Chipper likely wobbles because of an unbalanced wheel. Highly unlikely it’s the protruding shaft. That just wears your belt. Did you knock a chunk out of the wheel? Has one of the welded weights broken off?
@Doc6074 жыл бұрын
@@Jamestreemannah ended up being the pulley of cutter wheel wasnt inline wiht the lower pulley of the engine sharft pulley
@patrickwhalen4781 Жыл бұрын
@@Doc607 how did you get it lined up? Does the pulley just slide along the shaft with set screws?
@Doc607 Жыл бұрын
@@patrickwhalen4781 just tightened pulley screws to recommend torque and adjusted engine mounts to level
@arboristBlairGlenn2 жыл бұрын
Sadly, Randy died this year. He was working on my Bobcat and his time just ran out.
@trevorblack33855 жыл бұрын
Does it have the original motor?
@arboristBlairGlenn5 жыл бұрын
Trevor Black yes
@alexmatthews23324 жыл бұрын
Does it have John deere or cummins?
@MC-ik3zn3 жыл бұрын
Can you show when taking off the pulley?
@arboristBlairGlenn3 жыл бұрын
Pulley is pretty straight forward to take off.
@MC-ik3zn3 жыл бұрын
@@arboristBlairGlenn I been trying with a three leg puller sprayed lubricant heating with torch and nothing thanks for replying
@arboristBlairGlenn3 жыл бұрын
@@MC-ik3zn try heating it up
@ethancooney74804 жыл бұрын
This helped real well but sadly it was viewed too late had to replace the bearing when they blew
@arboristBlairGlenn4 жыл бұрын
Ethan Cooney sorry
@tfi62794 жыл бұрын
Just done a set , whole bearing off in 3 minutes with torch.
@arboristBlairGlenn4 жыл бұрын
You rock!
@johnmcgrath39073 жыл бұрын
Morbark charged me $1800 to replace two bearings. Wish i would have found this earlier.
@arboristBlairGlenn3 жыл бұрын
Still a tough job but very doable
@joopterwijn5 жыл бұрын
The handy you (and you crew) I have no doubt you could have done it yourself, but it would have take you a lot more time than your friend the mechanic 👨🏼🔧. And you mite miss some of the tools.
@howabouthetruth21575 жыл бұрын
There is also the chance of doing something "the wrong way" or "the hard way". Better to hire a reputable mechanic at least for the first time. Then you can learn by watching how "the expert does it".......and go for it yourself the next time. Learning things "the hard way" all by yourself through trial & error usually results in too much down time and $$$ wasted. Lord knows I've learned several things the hard way. Especially on projects that are "a specialty", where it's hard to find ( or expensive ) a good mechanic or tech. It sucks to tackle something yourself, screw it up, or take far too long........all that downtime & money is now partially, if not totally wasted.......only to wind up hiring the right man for the job, that we should've done to start with. Cheers.
@GenghisKhan3113 жыл бұрын
Cant use just any bearing must be a spherical roller bearing. Which cost 500 and up
@arboristBlairGlenn3 жыл бұрын
The bearing purchased from the chipper dealer was about 350.
@GenghisKhan3113 жыл бұрын
@@arboristBlairGlenn mine for morbark cyclone 8 was 500 with shipping. Thanks for responding
@adamn13712 жыл бұрын
yea he probably shouldn't have cut down to the shaft
@arboristBlairGlenn2 жыл бұрын
Minor damage
@HiLineTree5 жыл бұрын
Taper-Lock hub
@arboristBlairGlenn5 жыл бұрын
HiLineTree yes it is
@elffirrdesign20635 жыл бұрын
no sissy rubber gloves on those hands!
@arboristBlairGlenn5 жыл бұрын
Elffirr Design tough man
@evang65035 жыл бұрын
Possibly this could help somebody I have a Vermeer 1200 XL all of my friends have had to lower the feed wheel assembly out all together and torch the old parts off of the shaft to replace it I was able to do so without by using a gigantic prybar and stunning it with a ramset gun
@arboristBlairGlenn5 жыл бұрын
Evan G all chippers are different. Hope this helps someone else.