2017 arctic cat xf high country tether switch installation
Пікірлер: 24
@benlemieux60273 жыл бұрын
I've done two of these installs, one worked great, the other I'm experiencing the exact same thing you were seeing, kill switch and tether not stopping engine. I still have everything apart in my garage so now I look forward to fixing my connector. Thanks for the video. Awesome.
@Nitrorednecks3 жыл бұрын
Hopefully it works out for you
@waynerichmond10034 жыл бұрын
wish i saw this before i did mine. We took the connector apart because the wire wouldn't push out. we also moved the tether out of where the instructions say and towards to where it was easier to get to with gloves on, so the same plastic part just inline with the gas cap if that makes sense.
@Nitrorednecks4 жыл бұрын
Next time I do one I'm going to do the same and put it somewhere else. Like you said it's hard to get at with gloves on. With this sled it's not to bad it's my wife's so she dont really use it as much as I use mine.
@laytonjones57797 ай бұрын
My wires won’t push out, and I can’t get cap off
@lukemueller48733 жыл бұрын
I had that same issue too, but no I can’t get the machine to turn over at all, took out the tether setup completely and still I can’t get anything....
@Nitrorednecks3 жыл бұрын
You might have to get a test light and start checking all your connections.
@masonr93422 жыл бұрын
How did you get those blue and purple pins out? They won’t move.
@Nitrorednecks2 жыл бұрын
Use the proper size screw driver i think it was a 1mm and push it through. The lock on them locks the wires on pretty tight
@jonknisely14172 жыл бұрын
What switch did you buy?
@Nitrorednecks2 жыл бұрын
One from arctic cat
@rod51003 жыл бұрын
how long was the overall process
@Nitrorednecks3 жыл бұрын
I'm thinking an hr maybe hr and a half.
@rod51003 жыл бұрын
Thanks, for someone who never touched stuff like this would u recommend getting a mechanic to do it
@Nitrorednecks3 жыл бұрын
It's pretty straight forward and with this video and the instructions you should be alright.
@MarcusMorrissey7093 жыл бұрын
Any more detail/pictures on the pin issue? Mine is doing the same. Thanks,
@Nitrorednecks3 жыл бұрын
No I dont this was last fall. But if you take you connector apart you might have some corrosion or broken wire. If neither one of those things take the white cap of the plug and check the wires. You might need to bend the little tab up a bit.
@MarcusMorrissey7093 жыл бұрын
I did figure this out after but didn't post. The contact tab on the inside of the (female) connector was pushed down and wasn't making contact with (male) pin.
@trav94023 жыл бұрын
I wish cat or someone make a plug and play kit but i know i can do this after seeing this video
@Nitrorednecks3 жыл бұрын
Yah it's pretty easy
@MrReRacer3 жыл бұрын
Can you come to Sweden and do this on my machine? I can pay you in snow. And five ”thank you”.
@Nitrorednecks3 жыл бұрын
Hahaha I'd live to go to Sweden someday. If I every do I'll stop by..lol
@MrReRacer3 жыл бұрын
@@Nitrorednecks Tonight I installed the tether switch. Thank you for this vid, made things easier! All good.