Sweet deal man i just did mine as well 1984 chevy k20 4x4 sm465 to 5.3 vortec motor it runs good and your gonna be happy when your done...mine took a couple weeks due to transport vehicle and motor and tear down but the big trucks are still the best.🎉
@darianwhite426723 күн бұрын
Do you do this before you service the front brakes as well??
@Nitrorednecks23 күн бұрын
This procedure is for unlocking the rear brakes.
@masonking611Ай бұрын
Thank you, very helpful
@OutdoorsmuddingАй бұрын
What size bolts did you use
@NitrorednecksАй бұрын
Must be 1/4 inch and maybe 3 inches long. Measure yours to make sure
@OutdoorsmuddingАй бұрын
@@Nitrorednecks much appreciated 🫡👌
@joshbohner1712Ай бұрын
Hey man by chance do you remember how far apart the front cab mount bolt holes were apart I’m replacing the cab supports and floor supports kinda f’ed up and didn’t get a measurement believe it’s 42 inches from inside bolt hole to inside bolt hole
@NitrorednecksАй бұрын
I can't remember to be honest. It might be better to sit your cab on the frame and put the rear mounts and bolts in then do some measurements from a point on each side on the cab to the front of the frame to make sure it's square. Then sit them in place with mounts and bolts then tack it into place.
@User-sh5feАй бұрын
Bro I fxkn clipped my front diff ADD rock crawling this weekend went without my skid plate and damn do I regret it cuz my front crossmember is right in the way of getting it out thinking abt taking the head apart and then unblocking it cuz I have no room my lift is in the way
@28tpiАй бұрын
Good job for backyard resurfacing.
@stubbzstwАй бұрын
You saved me sooo much money. I have a flathead in my glove box to fix it now. I’ve gotten good and can do it in like a minute. Only happens once in a blue moon but thank you so much for this video.
@stubbzstwАй бұрын
Also don’t forget to press clutch in while you align them. That’s what I have to do with mine
@NitrorednecksАй бұрын
Glad It was helpful
@yiannimolonlavepowerАй бұрын
Having the front differential locked like that all the time when you turning left or rt the steering wheel will get stiffer and jumpy, you have no problem when you go straight, Good luck ….
@NitrorednecksАй бұрын
Nope not true at all. It's only in 4x4 when you put the tcase in 4wd. There was no difference.
@freestyleskylineАй бұрын
Well if you treat your truck like you do the parts on the table, thats why its broken. Lol
@KAOSshortyrip2 ай бұрын
Man.... Might listen to ya if you took the time to clean your shit
@antjuanrivera2 ай бұрын
They are awesome. I have the white and black one to match my jeep
@ethansexton27252 ай бұрын
aye whatever you gotta 🤷♂️do to get it out without damaging it 😂
@EdgarGarcia-ty6vn2 ай бұрын
Good job man. Thanks
@BenjaminBaker293 ай бұрын
Great wheelie! Amd this is my favorite song!!! Hy!
@probegt753 ай бұрын
That's dumber than hell...get a piece of all thread and the appropriate sized socket and washers and you can press it out. Lol
@Nitrorednecks3 ай бұрын
You know what's even more stupid is this comment 😂 explain to me how you get what your talking about behind the race please
@keatin106319 күн бұрын
Actively doing this job rn on my can am, good luck pushing a bearing into a solid metal wall lmfao.
@chrisbradford58933 ай бұрын
Helicoil?
@Nitrorednecks3 ай бұрын
No room to get one in
@joanstehlik2353 ай бұрын
Clever cheap fix, nice job 👍
@RetroViking6663 ай бұрын
Anyone have any issues with the new sensor not being read? I have a 2020 sierra elevation...did everything the correct way but it i get a " service brake pad moniter" ...any ideas?
@Nitrorednecks3 ай бұрын
You might of broke your pad sensor when hanging the brakes it's easy to do. What ever sidecar is if replace the sensor you should be ok
@RetroViking6663 ай бұрын
@@Nitrorednecks I didn’t hang the brakes I secured it up when working on it, the very last step I did was the sensor, maybe it’s just faulty…I’m gonna call the dealer and see what they say, I also didn’t do the rear, maybe that’s why? Maybe you gotta do the front and rear for everything to read correctly
@ellissmithjr65993 ай бұрын
Watched it twice,never understood what is stripped or the issue 🤔... Head looks fine and he said that the bolt is good so?...🤔
@Nitrorednecks3 ай бұрын
How can you see inside the hole where the bolt goes ? Head might look fine but the inside of the hole was stripped its all explained in the video..lol
@ellissmithjr65993 ай бұрын
@Nitrorednecks O... so it is Not the bolt at all... it is the hole that is stripped... gotcha now 👍😎
@Killingclout3 ай бұрын
Looks like ur manifold is bent
@kevinmeyers9243 ай бұрын
Your a G
@jeansoucy73063 ай бұрын
Hands down the best breakdown how to change a Cat track on you tube... Thanks great job.
@hendognsf3 ай бұрын
Ok but why did the check engine light come on?
@Nitrorednecks3 ай бұрын
I put it in service mode so it throws the engine light, saying there is something going on in the system. Once the process is finished then the truck is turned off, and then the next start up, everything returns to normal
@canadiantrailrider12083 ай бұрын
Finally vid a good video on this thank you very much this was very helpful
@user-pk4gc6pk8e4 ай бұрын
That baby needs some hugs and kisses
@joshbrunet90794 ай бұрын
Did it have heating problem from that?
@Nitrorednecks4 ай бұрын
That wouldn't cause it to run hotm if it ran to long it would of ruined that piston tho
@davidfirth93424 ай бұрын
I've never seen rot there lol along the ft that's different
@Nitrorednecks4 ай бұрын
Yah eh. I'm thinking it must of been upside down In the grass for along time
@ROUNDTOPNY4 ай бұрын
I changed the brake pads which were pretty easy to do as they are the same for the front and rear and there's only 2 wear sensors one on the left driver side front and one one the driver side rear on my 2020 gmc 2500hd duramax after I drove it on ramps to do the oil cooler Relocation kit so I'm able to install the bigger oil filter instead of that small one that it comes with it a service parking brake message illuminated with parking flashing and the wrench light every now and again it will go off I hit the parking brake before while it was off and thr brake engaged then the message popped back up and I couldn't move I had to disconnect both battery terminals waited for a minute reconnected then I was able to disengage the parking brake then the message came on then went it and came on again smh does anyone have any idea what's going on???
@vickiejudy52614 ай бұрын
Thank you so much. It works great and I’m so happy!!!
@Z4N4HORI44 ай бұрын
The best video my friend thank you ❤
@jonathanizquierdo99144 ай бұрын
How did u get it out
@Nitrorednecks4 ай бұрын
Get a socket that fits, put it on a drill or an impact, and hit it wide open till it melts is way out.
@WiserAsIGrow4 ай бұрын
thanks for sharing brother. putting a 4.8 in my 91 w/ muncie! was going to do a ls swap in my 4.3 but I really like the muncie 4 speed and want better mpgs then a tbi can give me
@Nitrorednecks4 ай бұрын
The ls engine you will be very happy with the mpg huge upgrade
@detroitpyro28594 ай бұрын
You couldn't have filmed this better for christ sake?
@user-fe3hg5bs4s4 ай бұрын
Bro is on crack
@nickanderson93934 ай бұрын
Who hurt you😂😂😂😂😂😂 this was fucking awesome😂😂😂😂😂
@lopezchevys4 ай бұрын
🤣
@unsoundfoxly4 ай бұрын
Me to the spam callers
@M_Track4 ай бұрын
Dude that's funny. 🖕
@commonsense54894 ай бұрын
😂😂😂
@right-behind-you4 ай бұрын
Are you hard right now?
@czarlev4 ай бұрын
bro??
@user-uk6pw6gn2e4 ай бұрын
Lay off the drugs
@LoadURlifles4 ай бұрын
Bro you hit my feelings bro
@HBY.24 ай бұрын
I wish my homda could do that. It kinda did tho
@HBY.24 ай бұрын
Finally someone putting those things in the snow!!! I've been waiting
@THE7EPIC7PUPPY4 ай бұрын
You must have really hated those tires! Nice truck
@Nitrorednecks4 ай бұрын
Had to make sure the ls was tuned just right 🤣🤣
@davidfirth93424 ай бұрын
No u buy a Honda lol
@Nitrorednecks4 ай бұрын
Honda don't have anything compared to what this has. Honda is good if you want to put around this thing is for adrenaline junkies 🤪
@davidfirth93424 ай бұрын
@@Nitrorednecks lol or people whonlpve to spend money 💰