@stefanomarando2180 9 ай бұрын
Your guy did a great job, but how do you explain to the client that the water-stop will be visible and covered with wp membrane? In addition, wouldn’t be better to fill the gap between the shower base tiles and the wall with silicone or polyurethane instead of cementitious grout? Thanks for these videos
@ardexaustralia 9 ай бұрын
Glad you like them! The waterstop will generally be covered with the installation of the shower screen or an alternate material. The video does not reach this step of the installation. As for the junction, the use of silicone will allow for a greater mount of movement but this is not necessary. Application of grout in this area is suitable, albeit, if the installation encounters high movement cracks could develop in the more rigid cementitious grout.
@donnastein4946 7 ай бұрын
Why did you waterproof below the screed and above, that isn't a requirement is it?
@ardexaustralia 3 ай бұрын
Good question @donnastein4946 - No this is not a requirement. Just for demonstration purposes. To be compliant with the Australian Standards, the active membrane must be applied to a substrate with falls to wastes.
@conp2471 8 ай бұрын
Does is have to be the CA20P Plus for the drain or CA20P is good enough ? Thanks
@ardexaustralia 8 ай бұрын
CA20P and CA20P are interchangeable in this scenario. Both the older CA20P and the newer CA20P Plus would both be suitable for this application.
Gripset Industries PTY Ltd.
Рет қаралды 45 М.
The Excellent Laborer
Рет қаралды 283 М.
QLH Home Renovation
Рет қаралды 40 М.
QLH Home Renovation
Рет қаралды 40 М.