Arduino UNO with a Atmega328PB on Minicore

  Рет қаралды 4,529

Fixed Until Broken

Fixed Until Broken

Күн бұрын

In this video, I show how to use an Atmega328pb on Arduino IDE. We use a module I designed that lets you use an Atmega328pb in the place of a dip package atmega328p. To burn the bootloader we must first set up Minicore for Arduino IDE. This project is sponsored by JLCPCB, $2 For Your PCB+PCBA, Register to Get $54 Coupons: jlcpcb.com/IYB
Project files: oshwlab.com/garnerm91/Atmega3...
Minicore: github.com/MCUdude/MiniCore

Пікірлер: 10
@ig-6674
@ig-6674 Жыл бұрын
Great video! I bricked two ATmega328PBs before watching your video
@user-go7qh4rh1i
@user-go7qh4rh1i 10 ай бұрын
Thanks you dude, you really save my maybe week or so) I ordered a few nano board w type - c input socket, and its came w some pre - installed program, and I cant load bootloader because avrdude don't recognize the chip. Thanks to you this boards are working now. Best regards !
@dickeyspaz3222
@dickeyspaz3222 2 жыл бұрын
Great video once again. Really good detailed info. Sent you an email a few days back in regards to GM Air Core.
@FixedUntilBroken
@FixedUntilBroken 2 жыл бұрын
I will have look back at it. I did glance over the email but I it was late at night and then I forgot the next day.
@dickeyspaz3222
@dickeyspaz3222 2 жыл бұрын
Got it, thanks !
@FixedUntilBroken
@FixedUntilBroken 2 жыл бұрын
No GitHub from me this time. I actually just used OSHWlab instead since it let me post the easyeda files. The GitHub link is Minicore.
@alexlem3597
@alexlem3597 Жыл бұрын
Hello. I am a beginner. I have two arduino UNO R3 clones on ATMega328 chips. First one is on ATMega328P and has a bootloader. Second one is on ATMega328PB and has no bootloader. Is it possible to burn bootloader on that board? I tried to flash "Arduino as ISP" sketch on ATMega328P board and connect it like you show at 6:49, but it does not flash bootloader. What am I doing wrong?
@noodle5260
@noodle5260 Жыл бұрын
Why I got this error ? avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x03
@SE10Gonzalez
@SE10Gonzalez 11 ай бұрын
Did U solve it?
Arduino Wired Ethernet - Getting Started - WIZnet
18:03
Fixed Until Broken
Рет қаралды 732
ATmega328PB и Arduino с MiniCore
8:38
arduinoLab
Рет қаралды 17 М.
Nutella bro sis family Challenge 😋
00:31
Mr. Clabik
Рет қаралды 11 МЛН
8-bit Arduino Clones: Atmega 328pb? How to fix computability issues!
15:55
Wi-Fi Sheep Tech Channel
Рет қаралды 8 М.
Arduino Uno to ATmega328 - Shrinking your Arduino Projects
37:17
DroneBot Workshop
Рет қаралды 780 М.
What are fuses? How to work with fuse bits on AVR microcontrollers
12:01
ATmega328 and PlatformIO - no Arduino!
16:21
Uwe Zimmermann
Рет қаралды 10 М.
Bare-Metal MCU #4 - Bootloaders and Programmers
18:24
Mitch Davis
Рет қаралды 54 М.
How to Run Linux on an ESP32
18:53
element14 presents
Рет қаралды 150 М.
1$ vs 500$ ВИРТУАЛЬНАЯ РЕАЛЬНОСТЬ !
23:20
GoldenBurst
Рет қаралды 1,6 МЛН
ПОКУПКА ТЕЛЕФОНА С АВИТО?🤭
1:00
Корнеич
Рет қаралды 3,6 МЛН
Gizli Apple Watch Özelliği😱
0:14
Safak Novruz
Рет қаралды 7 МЛН