Ares Amoeba Striker AS03 (Upgrade + Chrono)

Рет қаралды 648

Airsoft vs Everything

4 ай бұрын

Ares Amoeba Striker AS03 Upgrade:
Adding silencer and longer barrel + chrono test with the longer barrel + M150 spring!

Пікірлер: 22

@user-hi1et2tb5u 4 ай бұрын

With m130 and 400mm tightbore 6.02 barrel, I get 470 fps.I tried m150 but the motor is too weak to pull it on double eagle m900 guns.

@airsoftvseverything 4 ай бұрын

Barrel lenght is an important factor here. I only have 345mm long 6.03mm barrel, and sadly, Ares Amoeba Striker AS03 have small cylinder volume.

@karol.t5749 4 ай бұрын

I have 500 fps airsoft sniper VSR 10 and what i need to do to reach around 650 - 700 fps

@airsoftvseverything 4 ай бұрын

- Tight bore barrel (at least 6,03mm or lower) - Long barrel 500mm+ - Perfect air seal (in the hopup - nozzle connection) - Perfect air seal on the piston (inside the cylinder - M190 spring (+ you can put washers inside as many as you can) - Steel upgrade parts (cylinder, nozzle, charging handle, trigger sears etc) - Silicon lubrication inside the cylinder - PTFE seal tape in case of air leaking

@DoNotPushHere 4 ай бұрын

I can't understand why a bolt action does not have a buttplate. Is this based on a true firearm? How are you gonna use a short eye relief scope on this?

@R.A.I.D. 4 ай бұрын

1. You mean stock? 2. Also yes, but you know you can get stuff like this for any gun. You can put a non-stock grip on guns that can accommodate 3. Just do.

@DoNotPushHere 4 ай бұрын

@@R.A.I.D. yup, stock. I forgot how to speak for a while So, which true firearm has such characteristics? I couldn't find anything even close Thanks man!

@airsoftvseverything 4 ай бұрын

This is not a full value airsoft sniper without stock, and with 150mm barrel lenght. Basically, its a long "pistol". I think, Ares just made this replica because for fun. (Anyway, stock is available for this replica) No, this is a "fiction" gun. No real rife version. That specific 50mm scope is quite usable. Good aiming is the biggest problem here with any sights/scopes/red dots etc. Doesn't matter how gently I pull the trigger, challenging to hit a "can size" target even from 15 meters (from hands).

@DoNotPushHere 4 ай бұрын

@@airsoftvseverything so sad to hear that 15m is a challenge... Maybe better piston may improve seal and power? Or is it a disastrous hop up? Anyway many thanks for the clarification

@airsoftvseverything 4 ай бұрын

@@DoNotPushHere No, internal parts are all ok. The gun is accurate when I can find a support (wall, table etc) I mean, when Im shooting from hand, hard to hit any smaller thing from a certain distance because there's no stock on the gun and when Im firing (pulling the trigger), hard to stay on the target because the gun is moving usually left. Hard to compensate the trigger pull. (I hope, its undersandable 😥)