@@FernandoGabriel-uy3bv Close. But its an older video. Check my new ones!

@@user-mj4mw9jl6t In English, please.

​@@airsoftvseverythingWhat are the specifications of the spring?

I want to know the spring brand

@@user-mj4mw9jl6t It's no branded, I bought it from a spring shop rugobolt.hu/legpuska-Szlavia-betetrugo-balo-natur-N0200124270

​@@airsoftvseverything Thank you very much

Hello! Im using an air rifle secondary / tuning spring. Its not hard with a good technics, but the buttstock usually leave marks on my shoulder/arm after a few shots.

😂

true xd

@@afitkurniawan7499 ? :)

@@knov71 Can't buy more than 7,5 Joule airgun here.

@@benassob outside diameter: 11,4mm inside diameter: 8mm wire thickness: 1,6mm

@@VIPX122 You're welcome, mate!

@@braddbradd5671 Probably, but I will not try this on my own arm. 😄

@@airsoftvseverything Or you could find a willing volunteer :)

@@braddbradd5671 Ehmm, would you like to be my volunteer? 🫣

@@julianbriesnitz 550mm x 6.02mm steel barrel

@@airsoftvseverything ok to get even more fps you could try finding the perfect barrel length and use a 6.01 mm barrel they are really expensive though

@@julianbriesnitz If you are an older subscriber, you probably know, Im using mainly exactly 6mm steel bbs in my M24. Steel ones would stuck in a 6.01mm barrel.

@@airsoftvseverything ah ok i am an older subscriber but i didnt know that thats propably because plastic bbs are 5,95mm

@@julianbriesnitz Yeah, plastic bbs are 5,95mm, but my steel bbs are ball bearings (exactly 6mm) and not airsoft steel bbs (5,95mm) like you can find in few airsoft shops.

@@960fps-li1od 🫠

@@agungmm7848 💪

@@knov71 7,5 Joule. I already did, I have quite much pellet gun vs airsoft m24 videos on my channel, please, check them. (Tell me if you cant find them, will link them here.)

@@airsoftvseverything qual o nome da sua pellet gun?

@@knov71 In English, please.

@@airsoftvseverything Bro, sorry, I didn't realize my mistake. I wanted to know what the name of your pellet gun is.

@@knov71 Norica Sport (from Spain)

Hey! I never own (even see) Marui or Spas shotguns, so sadly, I can't help you in this question. 😥 But as far as I know, it doesn't matter if the cutout is short or long.

Here is the glasses. www.catus-airsoft.eu/safety-glasses-ever-lite-anti-fog-pyramex This glasses can stop almost every pellets too. I have video on my channel.

I already did.

Link is here. kzfaq.info/get/bejne/fc2edbyorcvbg6s.html

I think a polished bb would go a lot faster

@@VIPX122 I wouldn't say "lot faster", bit more maybe.

U need to test that again , with a better quality bb

Jah csak a Hell kell? Már megijedtem hogy a puskámat akarod 🫡😂

You mean human torso? Thats really expensive. 😥

@@airsoftvseverything i know broo, you dont need this for make amazing videos

@@knov71 most people wo make videos with are either rich or get them sponsored a single one costs like 6500€ and they are not that realistic since human skin is way thougher and the bones from the torso are made out of plastic

@@julianbriesnitz Sadly Im not rich and noone supporting me haha, but I try to make homemade ballistic gel somewhen. Here, 250 bloom gelatin is expensive too 😥 But maybe I invest money in it because a lot of viewer asked it already. 🫡

Hi! No, sorry. I already changed it to a new and more powerful spring and I don't know where I put that old secondary spring.

@@airsoftvseverything no problem. do you maybe know the size of that new and more powerfull spring?

@@Robindewaard4567 Check the link please. Mine is M135, but is out of stock everywhere. M140 is good too, but you need to cut it 5-6mm shorter than the original spring and you even need to upgrade the trigger sears!! airsoftarmy.nl/index.php?route=product/product&language=en-gb&manufacturer_id=13&product_id=228

@@Robindewaard4567 For trigger sear upgrade, please, check my pinned comment. Link is there.

Hi mate! Disassembly/replacement proccess should be the same. But uhhh... about the spring, its a really hard topic. If you have skills and few tools at home, and you can make the inside of the piston ~1mm wider, you can throw normal AEG springs in it. (in this case, I would recommend you at least M150 AEG spring, without the secondary spring. With secondary spring, M130 AEG spring is enough) If you don't have skills/tools, that will be a real pain to find the springs with the needed dimensions. Here is my original main spring dimension from the shotgun, it may help. Outside diameter: 13,8mm Inside diameter: 11mm Lenght: 133,3mm I can recommend you airsoftpro.cz and check the sniper and AEG springs. I can send you few pictures about the springs if you mail me on Gmail. [email protected]

@@airsoftvseverything cheers😉🍻

@@vicentecarmo1116 🍻

I got it from airsoftpro.cz but now its out of stock. Only M150-160 spring is available. These springs are "7mm airsoftpro sniper springs", so you need to cut them

I don't have measuring tool, but with M180 spring, not hard at all. (With double spring mod, its really hard to pull)

definetly the expander

What you exactly mean?

@@airsoftvseverything a air rifle pellet is the exact same size as a 4,5mm bb so it would be an interesting video i think a 4,5mm bb could go supersonic

@@julianbriesnitz I already shot steel bbs, I have videos. Steel bbs will not go supersonic from the airgun. Anyway, they rolling out from the barrel.

@@airsoftvseverything oh ok

@@airsoftvseverything i have another question how fast will 0.12 gram bbs go in your 6,7 joule airsoft or did you already make a video about that

Yes, its dangerous, but its fun.

@@airsoftvseverything have you tried steel ballbearings on the 700fps

@@braddbradd5671 Im only using 6mm ball bearings (0,90g steel bbs) in my M24. In this video, I used steel bb too. (405-411fps with 0,90 steel bb)

@@airsoftvseverything Ok i think the last shot was steel if im right ,,nice work

@@braddbradd5671 Yea, it was.

Hi! Original spring wire diameter: ~1,15mm New (tuning) spring wire diameter: ~1,4mm

Hi! No, sorry. But I can measure for you both, but you need to wait until thursday if its ok.

Thanks for the reply, but dont bother taking yours apart just for that, I'll measure it myself when I'll receive mine 👍

@@ghostmarksman235I can't find the original spring, but it was around 76mm long. Piston inside diameter: 12mm

No, Im from Europe, we dont need orange tip.

Thank you! Sadly, I cant give you link because its out of stock. But Im using airsoftpro m135 (or m140) 7mm tuning spring (you need to cut the spring because its for snipers)

true

Maybe you are right, but if someone type the full pistol name in the internet, he/she will see its a springer. By the way, I wrote "spring" in the video description. Anyway, thanks for your help and thanks for your comment too, I make few correction in the title and in the video description! 🙂 Edit: Video is updated, thanks again!

@@airsoftvseverything then it's all right 😄

It highly depends on a lot of things, but in this video, 0,43g bb won the test. By the way, this is an old video, result would be different now.

@@airsoftvseverything wokaii, thank a lot👍

@@THEVIRALID Np mate!

Hi! Yes, I remember you. I checked your video, from the sound, its look powerful, but I don't know what was your target in your video. What kind of metal sheet? What was the thickness? What projectile did you use? Can you shoot something which is similar in every country? Like tin cans, etc

Hi! Sure. - 550mm x 6.02mm steel barrel - airsoft pro gen3 hopup chamber - (I cant remember about the rubber but its a 80° rubber) - airsoftpro piston - airsoftpro steel cylinder - homemade spring guide - homemade cocking lever - air rifle secondary (tuning) spring /stronger that M190/ - steel trigger sears Spring details: 2x12,4x270mm 1+50+1

@@airsoftvseverything Thank you so much！

@@user-ih4rm8iz8g You're welcome!

@@airsoftvseverything Can you issue a video to introduce it?

@@shutiaolao7535 In the near future, I don't think. My M24 is working perfectly right now. Do you know the "rule"? If it's working, don't touch it. 😄

I built this replica for destroying things, not for playing.

My fully upgraded Snow Wolf M24