Arlen Ness Big Sucker air Cleaner Kit Install

Рет қаралды 20,030

3 жыл бұрын

Completed my stage 1 upgrade with this Arlen ness Big sucker air cleaner kit install. Now my 2020 Harley Davidson Electra Glide Standard engine can breath lots of air to produce its full potential HP and Torque after installing the Pro pipe By Vance & Hines and the FP3 Fuel pack 3 tuner.
A step by step detailed install video on how to install the Big Sucker high air flow intake kit built by Arlen Ness.
This Arlen Ness kit can be found on amazon - amzn.to/3iFlTRE
==================
Hey guys !
I just opened a merchandise line with cool and useful items - Please check it out and show your support - teespring.com/stores/the-holy...
----------
Follow my Instagram : / holy_shifttt
FaceBook Page: / holyshifttt
----------
My video gear:
- Camera I use the most - iPhone 11 : amzn.to/2XZ3vwn
- Motovlogs and sport scenes: GopRo Hero 8 - amzn.to/2x1SaAr
- Body "CAM" police style ,insta360 GO - amzn.to/2H19lqJ
- 360 shots - I use - Insta360 one X pro - amzn.to/3byUhLg
- Sound track - Sony voice recorder - amzn.to/3gvSOaY
- Microphone connected to it - amzn.to/3hYtf2y
-----------
Bike set-up
The lights I changed on the Harley Electra Glide :
- Head light - amzn.to/3dYY1Xt
- Rear Signal Light - amzn.to/2MSz0RV
- Tail Light - amzn.to/3cY5W6a
- Blacked out saddle bag reflectors - amzn.to/3cVpIkj
Gear I wear:
- The RIDING kicks - Bilt : Dexter - amzn.to/3hX2QCm
- Helmet I'm wearing (with face cover )is a Bell Rogue - amzn.to/2ER2Up7
- Helmet I'm wearing (Half helmet) is a Crazy ALs' beanie - amzn.to/30L7tKf
- Harley Jacket - Trenton - amzn.to/2B7VVGi
-

Пікірлер: 104

@1022wade 2 ай бұрын

Def best video on installing a AN air clean on KZfaq bar none. Thanks good job.

@MacRides1 3 жыл бұрын

Did the same mod with my 114 and retained my stock HD cover. Since the breather bolts on mine have a nipple on the end i'm going to drill thru the backplate and reroute the breather lines to a catch can and get that nasty oil mist out of my air intake box

@bigjohnq1 2 жыл бұрын

I'd like to see how you do this

@MacRides1 2 жыл бұрын

@@bigjohnq1 i found the Feuling vented dipstick and figured that was enough.

@FLYANDRIDE15 3 жыл бұрын

Looks great Sandy and awesome solution to get more air and still maintain that stock look! Nicely done!

@ru0452 2 жыл бұрын

I'm putting this on tomorrow. Most detailed video on KZfaq. Thank you

@markkloman7828 3 жыл бұрын

Thanks for this vid. I also like the stock look of the air cleaner, so now I know a cool looking option I have. I have a 2019 Electra glide standard.

@gorgo2227 2 жыл бұрын

Really enjoyed your video, VERY informative. I just got the same air cleaner and it was funny that the pictures were so hard to see. Thanks so much for making my install easy. Much appreciated..

@xedder1 Жыл бұрын

Best inforformative, and simple to follow instructions by far than all the others that I have search for. I appreciate you taking the time to explain the "how" and "why" you did things, and actually explained each step. I am pretty good with twisting wrenches and following instructions, I am not a fan of trying to figure out how and why somthing was done a certain way.... Again; many thanks!!🙂🙂

@vonmcmullen619 3 жыл бұрын

Sandy thank you very much for putting this video out, I was searching for the same exact thing to retain the stock look of my 2017 street glide great video I appreciate you.

@HOLYSHIFT 3 жыл бұрын

Thanks for the kind words 👍🏻🙏🏻

@Drunknmunk22 2 жыл бұрын

I have the same bike!! Added the Rinehart DBX45s and 12” Miter Bars so far. Was looking into air cleaners and I didn’t even think about keeping the og cover?? Didn’t know that was possible? Thanks Brotha! Ima look into this one now! 🤙🏼

@jsagazio 2 жыл бұрын

Thanks for the video, I’m looking to order that now 👍🏽

@jwrappuhn71 3 жыл бұрын

Looks great Sandy.

@josephemperly7221 3 жыл бұрын

Love that air filter. I have a similar air cleaner set up but I would love to get the big sucker style that you installed. Awesome!

@Paul-ov4jl 3 жыл бұрын

I just installed this same intake on my 19 Ultra. After searching for a video showing this, because the Arlen Ness instructions are awful, I just gave up and did it by guess work. This video is excellent. Best one on the web. Thanks for taking the time to do this. You'll save someone a lot of time pulling hair, trying to decipher the shitty instructions.

@HOLYSHIFT 3 жыл бұрын

Happy you enjoyed it... wish you found it earlier before you did your install

@kingpinracing6171 3 жыл бұрын

Thanks for the vid brother. Very helpful!!

@LSHD254 9 ай бұрын

thank you for attention to detail and realizing a video that needed to be shot because here i am 3 years later watching this vid and it has been helpful and 3 years later they are still putting those same crappy directions in the box lol

@BrewCityRider 3 жыл бұрын

That is an impressive monster air intake!

@josephrider1432 3 жыл бұрын

Great Video Sandy. I much appreciate the details you give us. Very helpful. Bike looks great. Glad your subscriptions are increasing. Ride safe.

@HOLYSHIFT 3 жыл бұрын

Joseph Saavedra - dude I enjoy making these videos! Because of good people like you that share and comment my channel is growing- and for that I am thankful to you ! 🙏🏻👍🏻

@josephrider1432 3 жыл бұрын

@@HOLYSHIFT It's my pleasure. I'm in Boca Raton Florida. Looking to get back on two wheels by this year's end. I'll definitely go up there and ride with you guys.

@jimmywilliams46 Жыл бұрын

Awesome thank you brother. You helped me get this on my bike!!!

@125saito 3 жыл бұрын

Hey Sandy. Great video there. I think you're right. You might have the only vid on installing the Big Sucker. I'm the proud owner of a new to me 2018 Road King and this air cleaner is on my list. Thanks for taking time to do this tutorial. New sub'r here.

@UltraLimitedHD 2 жыл бұрын

Careful using a 3/8 drive torque wrench down low - if that's what you did. Easy to covert a low ft lb torque to inch pounds, and then use your 1/4 drive. Anyway that's a nice looking setup but I route my hot gases into a DK catch can currently and not into the throttle body.

@shasiceruti8994 3 жыл бұрын

Awesome Sandy she sounds wicked 👍🏾

@HOLYSHIFT 3 жыл бұрын

Shasi Ceruti 👍🏻🙏🏻💪🏻 oh yeah !

@bigjohnq1 2 жыл бұрын

Sandy I really like this.I see this is going to be one of my first mods when I get the new bike

@HOLYSHIFT 2 жыл бұрын

Great easy performance upgrade

@gabrielpena6845 6 ай бұрын

Amazing video!!!! Thank you very much. There are so many of these videos on KZfaq and they all suck. Thank you for the details.

@ddaveism Жыл бұрын

Nice video! I’m wanting to go this route.

@luisvazquez5627 3 жыл бұрын

Awesome step by step video for the Arlen Ness Big Sucker Install 18-458. Thank you, the original installation instructions suck.

@HOLYSHIFT 3 жыл бұрын

You’re absolutely welcome- happy it helped

@mikemartinsr5350 3 жыл бұрын

Very nice sandy

@ianamahana 2 жыл бұрын

Thank you for sharing.

@jamesdunn3508 2 жыл бұрын

I just want to.say thanks. As you know I'm a fan . I just got this air cleaner and remembered I watched this video when you first put it out. But went back to it today just for reference while doing install. Did that My new tab exhaust and tuner today but five minutes after I finished it started pouring. Jersey weather what are you going to do. Wish I knew you.were.looking for a sports tee I just sold my nightster 1200N to get my 2019 Electra glide standard.

@douglasradowick508 9 ай бұрын

Hey Holy ShiFt I found the Arlen Ness BIG sucker air filter system a few days ago. Knowing they'd have "suck-rate" pictures with lack-luster install instructions to go with. I'm glad to have found your video presentation on how to do it properly-not half-@$$ed! Not sure what exhaust system to put with it yet. My H-D will be breathing & sounding good when I'm done!!🤓😎🐻👍🏍️😇🎉😁🏁🦅 Doug

@billflixtone6684 2 жыл бұрын

Thanks for the interesting video, I just put the HD high flow air filter on mine. Imam a little nervous to see the small screws that, if for any reason came loose, would be sucked into the valves and cylinders.

@phillhamberlin493 2 жыл бұрын

So it forces you to take the blow by oil mix back into the intake? I have a catch can installed to get around the filter.

@paulcorrona3564 3 жыл бұрын

Did it make a diff in power?

@polylove77 3 жыл бұрын

Can you do a video on the install of the fuel pak

@glencross4461 3 жыл бұрын

Good video next step cam!!!

@HOLYSHIFT 3 жыл бұрын

Glen Cross - spring time brings a new Cam

@glencross4461 3 жыл бұрын

Cool and you do nice work! 🤙

@hectorsantiago321 3 жыл бұрын

Nice.

@Tom-jw1pe 2 жыл бұрын

Nice work. Did you notice a difference once you changed it?

@wb4514 3 жыл бұрын

Were your new head pipes hard to install ?

@125saito 3 жыл бұрын

You've got the intake and exhaust. Now for the cam. Red Shift 468?

@luisvazquez5627 3 жыл бұрын

Awesome video. I just got the Arlen Ness Big Sucker for my 2017 SGS 107 and this video is exactly what I was looking for to install my air cleaner. The instructions are horrible and vague. Thank you.

@yihan206 11 ай бұрын

Hi I have a question. I did buy this high flo filter and some people said I need a Tune after changing the air filter. What is the minimum that must be done to the tune? Sorry my English isn't very good apologize. PS by the way love your video :)

@patc5599 3 жыл бұрын

Great on point video Sandy.. !! Did you notice different on Test Ride

@HOLYSHIFT 3 жыл бұрын

pat c at low RPM when hitting the throttle the response is way way more snappy. I believe that at higher speeds I’m getting more horsepower because of higher and faster air speed coming into the carburetor - although I cannot prove it only by riding it for that I will need a dyno sheet.

@akidnamedcam617 3 жыл бұрын

Hey buddy great review! What tune does it need? I did the SE heavy breather install and trying to figure out what tune I want

@HOLYSHIFT 3 жыл бұрын

I used the the Vance and Hines fuel pack 3 tuner with the presets they had. And it works great

@mikemartinsr5350 3 жыл бұрын

Old filter can fit inside new one

@Vipersshorts 16 күн бұрын

K&N airfilter 1717 fits M8

@firemen812 3 жыл бұрын

I have 2019 street glide bike would not run . Put old air flow back on bike runs good. I have Vance Hines tuner also Thanks great channel

@HOLYSHIFT 3 жыл бұрын

Thanks buddy

@gallegorider149 3 жыл бұрын

You made that look easy ! Let us know how it rides!

@HOLYSHIFT 3 жыл бұрын

The Adventures of FPFD318 -I will update!

@snakebite6511 2 жыл бұрын

should have put on a ghost pipe as looks odd with only 1 exhaust. Not a fat of the design of the exhaust as almost impossible to add an oil catch can as i dont want my blow by going back into my engine

@1022wade 3 ай бұрын

Great instructional video. I was about to order the big sucker for my 107 to go with some Reinhart slip ons and a V&H FP4. Have you been happy with the big sucker performance wise?

@HOLYSHIFT 3 ай бұрын

Yes sir

@alanwagers7073 4 ай бұрын

Yes i feel for you , think thats a great look . Are you happy with the flow ? And your tune?

@1022wade 2 ай бұрын

Thank you. Done and agree wholeheartedly. Thanks again for making the install easy.

@Gimps_Garage Жыл бұрын

I feel like you’re missing out on 1/4 of the potential airflow from the top where the oem cover, covers.

@michaelofiara9732 3 жыл бұрын

You gotta get a Power Vision and dump the FP3. Your bike will run soooo much better. I had an FP3. Its not good. You think it is until you try a different tuner. The PV is so much more versatile

@wb4514 3 жыл бұрын

He said he has a PV. Never mentioned a FP3

@harryhowell5644 7 ай бұрын

I have the same air cleaner.

@hippie2520 3 жыл бұрын

What happened to the vent hoses shouldn't you be using them ?

@HOLYSHIFT 3 жыл бұрын

Look again carefully at the installation- in this design the drainage of the breather is casted into the base piece and the oil fumes are directed into the air mistake directly into the carburetor

@tcatnat70 3 жыл бұрын

Thanks for the video. I plan on putting one of these on my '18 Road King in a couple of weeks. Any chance you could post the instructions Arlen Ness sent you? Did they provide a link or attach a file?

@HOLYSHIFT 3 жыл бұрын

Came with a black and white unreadable piece of paper... that’s why I posted the video... call Arlen ness they will email you a color file

@tcatnat70 3 жыл бұрын

@@HOLYSHIFT Thanks, I just noticed you're in NJ, I think south by the looks of some of your videos. I am up near Hamilton. I don't ride south too much. I do most of my riding along the river NJ/PA up into NW New Jersey. See you on the road. Check out some of my rides up to Old Mine Road.

@HOLYSHIFT 3 жыл бұрын

@@tcatnat70 we’re from Bergen county.... ride all around.

@bodieb316 3 жыл бұрын

Do you have to recharge it like a K&N, or is it water proof?

@wb4514 3 жыл бұрын

Yes you recharge it.

@jeffrobbins179 3 жыл бұрын

Lot of reviews say this filter spits oil... any experience with that?

@RoadieWingZZ Жыл бұрын

The original version of this system spits, which is why they added the reservoir to the inner side of the backplate. Any leakage will now trickle down and collect (theoretically) into the reservoir where it can be cleaned out when periodically servicing the filter.

@firemen812 3 жыл бұрын

Did you get engine codes after install

@HOLYSHIFT 3 жыл бұрын

Nothing!

@Bikernewscanada 3 жыл бұрын

👍👏👏👊

@harleyroadster9502 2 жыл бұрын

I want to know if Bergen Harley owned up to it and gave your money back?

@HOLYSHIFT 2 жыл бұрын

Haha … no they didn’t! They gave me store credit- I used that a few days later…😀

@djchris4771 3 жыл бұрын

Does this affect the fuel economy?

@HOLYSHIFT 3 жыл бұрын

DJ Chris for sure ! More fuel coming in ... But I don’t know how much it changes. I don’t really care either....😀

@gdei 3 жыл бұрын

Tuner your bike?

@HOLYSHIFT 3 жыл бұрын

Vance and Hines fuel pack tuner

@zombricone5898 3 жыл бұрын

How much has it leak oil. Big sucks tend to leak

@HOLYSHIFT 3 жыл бұрын

Nothing up to now

@ZomBeatBrainZ 3 жыл бұрын

Has a built in catch can, I suppose if you never clean it out then it will leak.

@mac7622 3 жыл бұрын

You saved my weekend install. The directions suck 💩. Thank you 🙏

@HOLYSHIFT 3 жыл бұрын

Haha - glad to help

@johnvlipani 2 жыл бұрын

Thank you for the video. I threw away the instructions and just watched you.

@toneysnowwpimppn3842 2 жыл бұрын

Dammit I spent 189.00 top do this

@125saito 3 жыл бұрын

Hi Sandy. I just ordered the Arlen Ness air cleaner kit. It's not nicely chromed like yours, rather just natural cast aluminum color. Did you have any problems with the filter collapsing slightly when you tightened it down? Here's a video of wheat I was trying to say. kzfaq.info/get/bejne/hc6lld2FxruVlKM.html

@HOLYSHIFT 3 жыл бұрын

Hi . The filter that’s being used in the video you sent me is a Harley filter element not Arlen ness. Look at the Harley logo on that aluminum plate. I didn’t have any problems

@125saito 3 жыл бұрын

@@HOLYSHIFT Yep, I see what you mean. I should have looked closer.

@steverobinson2414 7 ай бұрын

Excellent video showing step by step instructions. Arlen Ness’ installation instructions are very poor and the black & white picture references are even worse.