ARRI Tech Talk: ALEXA 35 - Mechanical Support (Subtitles in EN, ES, IT, PT, JP)

Рет қаралды 16,187

2 жыл бұрын

To accompany the ALEXA 35, ARRI has developed a complete new set of mechanical support items that provides flexible options for any shooting situation.
Product Marketing Manager Sean Dooley talks through the various system elements, demonstrating how they allow the ALEXA 35 to scale quickly and easily from a small and lightweight setup to a full-blown production configuration. He also discusses what is included in the production and lightweight sales sets.
Learn more about ALEXA 35 on our website: arri.link/ALEXA35

Пікірлер: 29

@johnnyweissmuller5838 2 жыл бұрын

Hahaha the guy under the table that took the camera @1:55 was really a comedic relief! Thanks for having humour!

@ARRIChannel 2 жыл бұрын

Please try not to mention Hans, he doesn't like the attention.

@IndexFossilchannel 2 жыл бұрын

@@ARRIChannel Hans, we can see you! 😆

@MARVScrew 2 жыл бұрын

1:50 - Production Set 8:29 - Lightweight Set

@cinematographybyej 2 жыл бұрын

Oh my. Yes. Just yes to all this.

@johnclay7644 2 жыл бұрын

useful on the arri cine system.

@FILMSCHOOLCINEMATOGRAPHY 2 жыл бұрын

Good Review!!! Thank you

@JamesKalidiasMC 2 жыл бұрын

Great ! So how can I participate in the giveaway ?

@ok4240 2 жыл бұрын

the hands at 1min54 are so magic 🤣

@nickdual Жыл бұрын

Nice voice, dude

@YuiSenpai 2 жыл бұрын

woahh naisu!

@sa.t.2507 2 жыл бұрын

All of a sudden kidneys and lounges are for sale all over Los Angeles.

@JoeGunawanfotosiamo 2 жыл бұрын

With the Lightweight set's top handle, what's the best way to mount a Light Ranger 2 or Cinetape bracket?

@ARRIChannel 2 жыл бұрын

Hi Joe, there are 3/8" -16, 1/4" -20 and M4 holes on the side of the LCH-1, near the front, that could be used for a mounting arm, or many options from the top plate. If you mount the viewfinder to the MVB-1 on lightweight rods you could also use the 3/8" hole at the very front of the top handle, which would be the perfect position. However, the CCH-5 top handle in the production set is really the handle that was designed for the tools that you mention.

@YeahWhiplash 2 жыл бұрын

Does the new shoulder pad come in a left handed variant, or can I screw it off and reverse it?

@ARRIChannel 2 жыл бұрын

Hey there, sorry for the delay, we've been looking into this. It's not possible to flip the shoulder pad on the CBP-5 or CBP-6, but it should be possible on the BPA-6. It's definitely possible on the CSP-2!

@jefferymeng4007 2 жыл бұрын

woooow

@hridaydeventertainment3597 2 жыл бұрын

Price?

@dingoboy Жыл бұрын

Hi Sean! I’m curious about the setup towards the end of the video: how and where is that mic attached to the camera?

@ARRIChannel Жыл бұрын

Hey Fergus, that's an Ambient TinyMike with the included shock mount screwed into the 3/8" hole on the side of the LCH-1 top handle. You could also use a MHB-2 mounted to either top plate for the camera, which will get you into the right position for a top mic. We don't offer a shock mount ourselves but for standard diameter shotguns we've often used the Rycote InVision Video ¼” Adaptor, without the arm part, bolted to the MHB-2. - Sean

@dingoboy Жыл бұрын

@@ARRIChannel Thanks! Much appreciated.

@dingoboy Жыл бұрын

@@ARRIChannel Thanks! Very useful.

@derekjcooper Жыл бұрын

Can the BUD-1 go directly on to a dovetail or does it require a bridge plate?

@ARRIChannel Жыл бұрын

Hey Derek, you'll need a plate in between, they are different sizes. The SAM-6 is probably the lowest profile plate that will interact with the BUD-1 and offer you threaded holes to mount a tripod plate in, otherwise you could try a BPA-6 or the UAP-3.

@jujufactory 2 жыл бұрын

André, André, are you telling me you forgot the XLR inputs again?

@ARRIChannel 2 жыл бұрын

Nope! Go and watch the Electronic Accessories Tech Talk too :D

@NPC_averagemale003 2 жыл бұрын

How did you mount the microphone?

@ARRIChannel 2 жыл бұрын

That's an Ambient Tiny Mike mounted to the 3/8th hole in the side of the LCH-1.

@stoutfilm2364 2 жыл бұрын

@@ARRIChannel can you please post a picture of how you mounted this? curious for a solution to easily mount a Mini Cmit to this camera with a shock mount. I don't yet see how to get that on the side of the LCH-1. Thanks!