3 years later your video is still helping people (me) upgrade their trucks 🙂

I like your video style, very minimalistic. And you obviously have a warm heart. Great video

You did the same as me: not using the ESC fan, thinking it's the Castle Link cable. Once I finally learned that, I plugged the cable into a free receiver slot and the fan heated up without spinning. Called Castle and they're sending a replacement. I'm glad my ESC wasn't overheating, because the fan wasn't even on. I thought the ESC fan was powered directly through the ESC, but it's not. It requires its own power port.

Great video, thanks for taking to the time to show in detail this installation. Eagerly awaiting your test drive video.

I saw many video like this about how to install the brushless motor, but this video has most amount of information that I need to install the new motor.

I like video RC 👍

Must upgrade pinion I have same set up in senton mega 27t pinion 💪🏻very fast now compared to anything else

Sweet mod thanks for making the video

This was like some John Denver acid trip.

I used the same motor/ESC combo. The factory motor mount was retained. The spur gear feels like it's binding.

BTW that is a sensor motor so DO NOT switch wires it is bad for it

Did you not upgrade to alloy mount that s the problem lots ppl doing not upgrading the motor mount aswell best fit 4s motor mount its thicker alloy

Fantastic vid brother, liked and subbed you my friend 😁👍😁👍

I would like to see it running!

My motir over heats in my granite fast even with fans

Why does everyone gear so low when retaining the 48p gearing? Yes the 3S cars come with a 17t pinion…but on a 57t spur. That’s equivalent to running a 28t pinion on a 91t spur. Even with the 500kv higher motor, you’d want a 23t pinion to match a stock BLX car running the 17t pinion. A larger pinion is also far less likely to strip the plastic spur. A lot of guys say the 48p is too weak for brushless power, but in my opinion they are just gearing them way too low. A 17/91 is equivalent to running a 10t pinion on a stock 3S car, they’d likely strip that 57t plastic spur gearing that low too.

Great video I'm getting one of these trucks how does the stock gears take the new power any info is greatly appreciated thanks I want to do the same thing to mine

How may teeth are on the gear, my son ground the teeth off the original one. I wanted to upgrade the new one to metal. Guyvat the hobby shop gave me a new one but it was the next size up and he said it would be ok... fast forward to now, he has since burnt out the motor . I'm about to put the new one in but I want to get the correct gear but metal.. just don't know what size it is supposed to be, something keeps telling gme the one have in there now is an 11... any help will be great,

great video, just rather hear what you are saying rather than music

I hate my Arrma granite mega 550 brushed rc. It either over hits and shuts down or now it just flashes red. Is yours dependable?

How well has the spur gear held up? I am about to do this conversion to mine any parts I should upgrade? I already have the HD input gears any help is greatly appreciated thanks!

Good video but I wanted to see what connects were?

You wouldn't happen to know of any good aluminum shock upgrades for this truck would ya?

Would have been super helpful if it wasnt fast forwarded through 95% of the video that was made, I assume, to help others do the same or similar work on theirs? I just upgraded my granite 4x4 with ezrun max10 sct. Got a new slip gear and bore with arrma aluminum motor mount. Tried to tell from your vid, but couldn't....is it supposed to be near impossible to get the mount to snap back over the clip part? Plus, now the car will spin tires fast when holding in air but as soon as its on the ground it either turns off or stutters. Seems slowly pressing throttle will get it going but not for long. Any ideas?

Hi great video ! Happy that u dont use a blx. Can u give to us the pieces that u use un a list ?

Love the video considering this rc. I'm curious costs on the parts total to do all what you show so if I get and decide to go through upgrade in the future

I install the same combo and I’m getting overheating problems. Any suggestions?

True power

hey can you send me a link where you got those

Do you have link to get this motor and esc combo.thanks .great video

I have a big rock im pulling the whole drive train out of and putting in a brushed granite.

Did you keep the stock 48p spur gear if so how long before they wore out

I’m still struggling taking the motor off pls help

Do Arrma Granite 4wd have Metal diff?;Thanks a lot

What pinion you running

You have to change the gears I put a brushless motor on mine and it lasted about maybe 5 minutes before it stripped out

do you have a video of putting a brushless in the 2wd granite or can you put a link in my comment of a video how to put a brushless in the granite 2wd

Hi I'm trying to build my arrma granite blx 3s, to a brushless system to make it a 4s, need to Kno the best parts to get??? Pls help

my motor just went up in smoke today rip

Are you from South Carolina?

How has it hold up? Have it broke parts for the powerful motor or is it ok?

How did you mount the esc?

What's the top speed you got and is it still working?

Just upgrade to brushless 3s my spur got chew up from the. 26t any buy sell a metal spur that fit a garnite mega

What the max speed now with brushless upgrade?

Have any parts broken yet?

Who is playing the guitar, or what song is that?

How much was all of that stuff to upgrade it?

so this how yeat made money so big 12:44

Where did you get this system

do you have any experiences that the plastic input gear is breaking all the time. Mine did it three times, two times on 2s, once on 3s (also brushless conersation). Is there any alternative to that plastic stuff?

It has to be the under armor

What’s the speed

no

Your video/demo became useless about half way through when you sped up the video.. zero help on motor change over

REPLACE THAT CRAPPY STOCK SERVO. THEY SUCK...

Why did you skip over certain important steps? Your video is useless!

Bro you started off good talking then you added music and sped up the video during the critical information! Wtf thumbs down 👎🏻