Arrma Outcast 6S EXB Full Review! - 1/8 RC monster truck, is it the best 1/8 6S RC car?

No video

Arrma Outcast 6S EXB Full Review! - 1/8 RC monster truck, is it the best 1/8 6S RC car?

Рет қаралды 20,978

Күн бұрын

Full Review of this Extreme Basher RC car from Arrma! The Arrma Outcast 6S EXB RTR RC car. Is it good, is it worth the money, is it durable? Let's find out! This compares to the Traxxas E-Revo 2.0 and the Redcat Kaiju.
Affiliate links:
Gens Ace batteries: bit.ly/3c4z3qV
#Arrma #Outcast6SEXB

Пікірлер: 75

@whistlinlipo 2 жыл бұрын

Held off on getting this outcast until I could get your final review after I found your MT410 review to be spot on.

@pabz3218 2 жыл бұрын

The reason it's so durable is because you are a WAY better driver than most of us 😄. I wonder how it would hold up to bad drivers like me

@williamoleary9330 Жыл бұрын

This beast is now on sale for $489 in the USA. I mean that’s unbelievable and only Arrma does this for the RC world. Love Arrma and they are our families only RC Company.

@slickswheels Жыл бұрын

I chose the felony. Was stuck between backflips or drifts. Arrma tough.

@jdavvy_fh5999 Жыл бұрын

@@slickswheels you heard the Arma fireteam has a hand brake?the felony seems like a good deal rn

@slickswheels Жыл бұрын

@@jdavvy_fh5999 My felony will be here in time for my birthday, I think my 8s truck will be the Xmaxx. Outcast seems too much of a gamble with my money.

@jdavvy_fh5999 Жыл бұрын

@@slickswheels sounds good Xmaxx a beast,all the outcast’s seem to similar except the size imma go with this outcast best deal for me

@jdavvy_fh5999 Жыл бұрын

@@slickswheels good luck with it 🏎

@GarageLifeRC 2 жыл бұрын

I love my Outcast. Definitely a stunt truck but I’ve also gone through my fair share of parts. Mainly in the steering.

@rcmakingtracks18 2 жыл бұрын

Just brought one, love it. Thanks for the great advice, my arrma garage is growing. Ha. Thanks for sharing. John

@kiwijunglist Жыл бұрын

Surprised this is discontinued, I was about to buy one. I'm not sure if I should get it now, because it's relatively expensive in NZ.

@DashzRight Жыл бұрын

Same, but the parts for the exb are shared for the notorious and outcast and they will still produce these even though the car is not sold as a rtr

@SP-ho5cw 7 ай бұрын

Did you get the outcast in the end? Also in NZ looking for an RC

@savagex466-qt1io 11 ай бұрын

I like how there is like a "skirt" or extra plastic that wraps around the side, it protects the back end of the motor because they stick out a lil on the talion, that had me worried a lil bit but people have said they have not had any problems with it.

@G__Mason 4 ай бұрын

I run the outcast tall side guards on my Talion… fits perfect

@bigeclipse718 Жыл бұрын

If you had to pick this or the outcast 8s which would you go with?

@loum7008 Жыл бұрын

Great review thanks!!! I think Arrma's 2 year warranty is worth mentioning. They have great customer service and have really taken care of any issues that I have had

@scottg429 Жыл бұрын

Can it take the same battery as the Mojave? Can you just use a single 6s?

@michaelmacisco2566 2 жыл бұрын

Did you run this with the punch setting turned up ? Did that make a big diff in regards to power & drivability ? How do you think it would be with a 1650 motor ? I have one in my Mojave exb and it rips . Thanks for the vid. Outcast is on my next list. Just got a Talion Exb

@RazorRC 2 жыл бұрын

Punch set to max, highly recommended. kV is not such a big deal (I have a 1750 in my Kraton 6S), it's the length/width that will make a difference for more torque.

@savagex466-qt1io 11 ай бұрын

Did you get the outcast ? Id love to get the exb talion for sure. I think its the most durable stock 1/8th truggy you can get.

@michaelmacisco2566 11 ай бұрын

@@savagex466-qt1io i got both tal. Is my fave

@underfeed 2 жыл бұрын

great review, thanks for sharing. Do you think the extra price is worth it over the Notorious V5? thanks in advance!

@miketube6662 2 жыл бұрын

What fan would u recommend for the motor that fits on the heat sink the arrma fan looks poor

@kylecreek6735 Жыл бұрын

I just ordered one on sale for 541$ with taxes and shipping included! They’re running a sale until 10/17/22 if you want/NEED one! I can’t wait to get mine. It’ll definitely be getting a Castle motor.

@RazorRC Жыл бұрын

deal of the decade IMO!

@kylecreek6735 Жыл бұрын

I didn’t plan on buying the Outcast, but for a 6s EXB RTR, 490$ is impossible to beat! I found your channel looking up reviews, I definitely subbed, man! Keep up the awesome work. I just finished my Lasernut & Infraction/Vendetta builds. So, naturally the Outcast is next and a Castle ESC/Motor combo is on my short list now.

@Trotter13 2 жыл бұрын

Just wanted to chime in real quick on this. The Outcast EXB is actually a couple MPH faster out of the box than the E Revo. Stock the E Revo is just about 52 mph where the Ourcast is at 55 MPH. They both will hit the high 60s if geared up but neither like that speed with temps ROARING to what I consider the damaging area. Play with your Punch settings to get the kick you want. Just wanted to give you some of the GPS tested numbers we see on these. I do think what you may notice on this vs. revo is that handling at speed is night and day. Speed on the Revo feels better (for obvious reasons) so that could be why one may feel faster than the other when they are essentially very similar in power. Also that servo is TRASH!

@RazorRC 2 жыл бұрын

Thanks, I was talking about the power rather than the top speed (which is more a matter of gearing as you point out). Punch is already at max, I think it’s the weight of the truck as compared to the ERevo as well as having a slightly smaller can and lower kV.

@johnpullantes4013 5 ай бұрын

Stuck between a second hand Xmax or this for 500$? Any opinion?

@theRCLlama Жыл бұрын

I'm curious if I can use the high speed pinion with a fan set up. I know the arrma fan setup with the heat sink doesn't really add much cooling unfortunately.

@NeighberhoodRC 6 ай бұрын

Do they got guards for the arms front and rear ?

@murtasma 2 жыл бұрын

Damn almost 800 bucks I'd rather save a bit more and buy a XMaxx instead at those prices.

@RazorRC 2 жыл бұрын

XMaxx is now $1k!

@likandros3633 2 жыл бұрын

Great review... As always... For a basher would you recommend this one or a tuned(diff, shocks) traxxas maxx v2?? Thank you...

@regno78 2 жыл бұрын

I don't believe that arrma use actually 7075 aluminum than something weaker. You know it when try to file arma chassis or a real 7075 aluminum plate.

@RazorRC 2 жыл бұрын

You could be right

@sabariahrudin9800 2 жыл бұрын

Hi, which one is better i your opinion, outcast 6s exb or Mt410?

@islandrc-duke1972 2 жыл бұрын

Awesome RC and great overview

@seanlawrence972 2 жыл бұрын

I'm torn between the 6s Outcast EXB and the Kraton 6s EXB.....granted the Kraton is a roller. Any opinion between the 2?

@RazorRC 2 жыл бұрын

If you’re skilled at driving and send it, get the Outcast. Else get the Kraton.

@shahzahreen2222 2 жыл бұрын

which you would recommend traxxas maxx v2 ot outcast exb 6s?

@AsurasWrath164 2 жыл бұрын

A bit more durable than the mt410? Well, this surprised me.

@GarageLifeRC 2 жыл бұрын

Same here

@YungStun 2 ай бұрын

Nice vid sorry I’m late to the party , been in the hobby since October of last year got 5 Arrma vehicles & one Traxxas really wanted this to be my next Arrma but is it discontinued?😢 if you could help me out and get back to me I would appreciate it and one day I would like to get involved in your monthly challenges hence the stunt truck 😁

@RazorRC 2 ай бұрын

Thanks, but I don’t have monthly challenges! Yes, truck is discontinued, they are most likely releasing a new version soon.

@YungStun 2 ай бұрын

@@RazorRC my bad it was East Tactics with challenges.!! lol and man that blows 🙄 well if you have any suggestions on a 1/8 or 1/5 scale that won’t break the bank and is a good rig im taking suggestions bday this month want to get me something nice already have 6s Kraton but I’m keep looking around 🫡 and thanks for the feed back 👏🏽👍🏽

@joshjohnson9167 2 жыл бұрын

Hey man, I have the talion exb rtr. Ended up with a rock wedged between the chassis and diff case. I order the arrma aluminum diff case as a replacement/upgrade. Have you any experience with them? Website say they're a direct replacement however the outdrives are to larger to fit the face plate🤬

@RazorRC 2 жыл бұрын

the exb's have different diffs

@joshjohnson9167 2 жыл бұрын

@@RazorRC well shit lol thanks man. Reached out to a few others and you've been the only to respond, I appreciate that

@extremebashingrc3174 2 жыл бұрын

I’m stuck between a 6s outcast exb, 6s Kraton exb and the v2 maxx

@RazorRC 2 жыл бұрын

maybe I need to do a 1/8 basher shootout...!

@ThatGuyFromMatagorda 2 жыл бұрын

I’m having issues with my outcast 6s EXB I lost all steering and throttle 5 minutes into my first battery. Any suggestions?

@badbrad1564 2 жыл бұрын

Make sure you wait a few seconds before you apply power or steering . Wait yill the wheels straightened up

@DashzRight Жыл бұрын

should ve get a traxxas lmao

@DashzRight Жыл бұрын

I made the mistake of trusting this guy with the silly biased af scores and got ripped off. 800€ down the drain for the outcast here in Spain, you need to buy an extra card to somehow program the esc and change a setting to not make the car feel like crap, have to refill the oil inside the diffs with proper weight to make the car work somehow fun and not explode the tires, the exposed center diff is a grinder for motor wires and pebbles, the arms are made of glass for some reason, they don't bend they break with the most mild crashes and now have to spend more money in rpm arms, the servo saver is just wrongly made, it is way too stiff and Im counting the days until it breaks the servo, you literally pay for an average product, mechanic simulator, that is not very different from most of the other rc cars in the market, not to mention dealing with these stupid straps for the battery and the body clips that takes like 3 minutes to take off or put on, just for the handy battery locking system and the reinforced cage/no body clip designs on the traxxas makes them automatically worth it, how people recommend arrma over any high end traxxas car or even losi is beyond stupidity, guess arrmas must be cheaper in the states or some people just want to work on their trucks for the sake of it. And I thought: wow these cars don't look like they have half of the R&D traxxas has, but maybe if he gives the traxxas trucks such low score, some of these arrmas must be sick, terrible mistake.

@RazorRC Жыл бұрын

If the Outcast is €800, then the Sledge is what, €900? And what program card can you use to program that ESC? And is the chassis 7075 and are the diffs as strong as the EXB? How are the tires and exposed center diff and how do you change the gearing? When you compare the Outcast EXB to the other 6S cars, I don't think there is a better choice.

@DashzRight Жыл бұрын

@@RazorRC both cars cost the same, and not even talking about the sledge, the maxx or the e-revo are better trucks than that one and cheaper, why the heck would I need a stupid program card, a gearing swap or a fake 7075 aluminum chassis, for a product that is reliable and works out of the box?, that's the entire point of a RTR you know?: Ready To Run, and not a "Ready to work, adjust and tweak stuff", most Arrma cars suck as RTR

@RazorRC Жыл бұрын

@@DashzRight if you just want a beginner truck that you don't make any changes to, then Traxxas is perfect for you. all the stuff you're complaining about are for more advanced RCers to make changes to their cars to get it to drive better.