Arrma Outcast 4S V2 Full Review - Best RC monster truck stunt truck?

  Рет қаралды 23,406

Razor RC

Razor RC

Күн бұрын

Affiliate links help support the channel:
Outcast 4S V2: bit.ly/3zRC1Ky
Kraton 4S V2: bit.ly/3JGqEcM
Review of the Arrma Kraton 4S V2: • Arrma Kraton 4S V2 Ful...
Review of the Traxxas Maxx V2: • Traxxas Maxx V2 2.0 Fu...
Review of the Team Corally Sketer 4S: • Team Corally Sketer 4S...
Full review of the Arrma Outcast 4S V2.
#Arrma #arrmaoutcast

Пікірлер: 86
@lautrique
@lautrique Жыл бұрын
Great review. Placed it on my wishlist.
@Livlifetaistdeth
@Livlifetaistdeth Жыл бұрын
Your truth is always well researched and insightful. Thanks for spending it and sending it.
@kaosr.c
@kaosr.c Жыл бұрын
Good honest review 👌🏻 Im looking forward to getting mine and giving it a go .
@rcsmith5909
@rcsmith5909 Жыл бұрын
It is the nicest driving truck in my lineup: Very plush. Very predictable like you explained . I have most the high end trucks well some. UDR , Maxx,Xmaxx, Hoss,??) K6 exb. Just started buying the Arrmas. Unfortunately my local hobby shop is Traxxas licensed so that’s all they sell. Good fair and very accurate vid on this rig it is my go to rig. I destroyed my center driveshaft with a rock that got caught in between the motor and shaft ate right threw the shaft
@GreatLakesRC
@GreatLakesRC Жыл бұрын
Fair review as always 👍 I'm loving mine so far. I am seeing the bad steering. Gonna try to take the front sway bar off, that's a great tip 👍 One thing I noticed when I hooked it to my DX5C is that I had to set the endpoints significantly more in one direction compared to the other two get full travel 👀
@332_RC
@332_RC Жыл бұрын
My Notorious had steering problems. Changed to a 40kg all aluminum servo & it helped tons. But it wouldn't steer as far one way as other. I checked over everything & found the outer tie rod screw was loose on the arm. Fixed. I also tightened the upper front A arm screws & that helped too.
@robgoffroad
@robgoffroad Жыл бұрын
I absolutely love mine. I won't be "blasting" mine nearly as high as you and some others, but if it breaks, hey, it's fixable. I disagree with a number of your ratings, but that's okay.
@leegorman3329
@leegorman3329 Жыл бұрын
i’ve heard nothing but good things, seen peeps on here putting it through some serious beatings, i’m definitely getting one
@Yan7001978
@Yan7001978 Жыл бұрын
Great review!👍
@chadbiermann3380
@chadbiermann3380 Жыл бұрын
I appreciate the review! I only have one run on mine so far so I don't really have an opinion yet other that I had a 💥💣 driving it! 💯 Also steering radius is huge with any kind of speed. But not bad when your not on the throttle. I really like the control in the air. Maybe Horizon will change the formula for the composite if enough ppl end up breaking the chassis? Time will tell I guess. Anyway great review!! 😉
@TheFatAssCat
@TheFatAssCat Жыл бұрын
I like how concise your reviews are while remaining thorough. My only disagreement is the SLT3 remote. The steering wheel is big and the spring is weak so I'm all all over the place (I feel the same way to a lesser extent about their DX3). Love that it comes with a Spektrum receiver that you can bind to all your other vehicles though! So I can forgive it 😁 Shame the chassis still has issues. I was quite surprised they made these things even longer with the same design. At least beef it up more! I'm still on the Fence about picking one of these up.
@lorent0591
@lorent0591 Жыл бұрын
Did you end up picking one up?
@rcjoe406
@rcjoe406 Жыл бұрын
Nice...I feel like under normal bashing around the yard or dirt field with a small ramp this is a must have for sure and I'm a traxxas guy all day everyday 👍🙏
@RazorRC
@RazorRC Жыл бұрын
would be great for that!
@rcjoe406
@rcjoe406 Жыл бұрын
@@RazorRC no doubt
@rcsmith5909
@rcsmith5909 Жыл бұрын
Oh got 3 slashes two Vxl and ultimate and a Sledge.For stunts and jumping the outcast 4s is in a league of its own. I do have a fun class and it made the cut 👊🏻☺️💯👍🏼
@wrc_adventurehobby5242
@wrc_adventurehobby5242 Жыл бұрын
Great video 👍🏻👍🏻👍🏻👍🏻
@Moggmodels23
@Moggmodels23 Жыл бұрын
Brilliant video mate 👏👍
@RazorRC
@RazorRC Жыл бұрын
Thanks 👍
@rodrowdy6661
@rodrowdy6661 Жыл бұрын
I've seen someone put silicone under the motor to keep it from flexing into the chassis. Is this a good idea? Or could it cause the motor to run hotter?
@nathanwirth9906
@nathanwirth9906 Жыл бұрын
I installed a reefs raw 500 in mine and it totally fixed the steering 👍
@paulclancy2404
@paulclancy2404 Жыл бұрын
That thing will snap the links lol make sure set end pts
@EXTREMERC416
@EXTREMERC416 Жыл бұрын
The energy of the backflip directly on the shock tower and chassis and the crash sounded like a gun shoot. Yeah...
@vacatedbroom6237
@vacatedbroom6237 Жыл бұрын
I feel this review is pretty accurate, it's a decent stunt truck, but definitely has some quarks
@edsheldahl276
@edsheldahl276 9 ай бұрын
That's funny this is one of my favorites 😂
@patmarcus172
@patmarcus172 Жыл бұрын
Thanks for doing this. Was hoping this would be "up next" in the schedule and yes, a comparison with the Mt410 would indeed be fantastic to see. Have you had much chance to hammer the Outcast since fitting the M2C motor mount and brace we could see in the video ? It would be great if you were able to report that its fitment has partially or wholly "fixed the problem" because it stops the motor banging on the chassis.
@RazorRC
@RazorRC Жыл бұрын
Haven’t run it enough yet.
@tittentei7331
@tittentei7331 Жыл бұрын
@@RazorRC What about now? Should i buy it? And are mt410 better?
@adtjtjdjsj
@adtjtjdjsj Жыл бұрын
​@@tittentei7331 MT410 is better
@tittentei7331
@tittentei7331 Жыл бұрын
@@adtjtjdjsj 😊
@craigpoer
@craigpoer Жыл бұрын
Nice review 👌 did they put a better servo saver? Mine was really soft in my kraton
@RazorRC
@RazorRC Жыл бұрын
no, still soft
@philipbrits2984
@philipbrits2984 Жыл бұрын
Hey man, how does something like this compare to a rival mt10 in terms of handling and durability?
@MrtipRC
@MrtipRC Жыл бұрын
Nice review and this weekend I'm gona purposely land wrong with my v2 Kraton and Outcast to Try and break my chassis !
@ronchang9791
@ronchang9791 9 ай бұрын
Thanks for giving us great reviews that we can trust. Your Arrma 4s v2 reviews really opened my eyes up to a line that I didn't think I'd like, especially now that we have the M2C chassis brace. For skatepark use with a lot of vertical surfaces and spines to destroy the car, would you prefer the lighter 4s Outcast or the heavier 6s Notorious for surviving this kind of abuse? I wish I had more dirt jumps, but this is what I have to work with.
@RazorRC
@RazorRC 9 ай бұрын
Thanks!!! I think for skate parks, I prefer the plastic chassis ones because they're lighter. I've driven a Granite at a skate park and it was pretty good. You still have to land them, but the lightweight is an asset.
@jaayyboy28
@jaayyboy28 Жыл бұрын
An additional bash bar would 100% sort all chassis issues, then you absolutely could send it 30ft and not worry so much.
@Ryan-Tv-Show
@Ryan-Tv-Show 4 ай бұрын
Hi ! Question ! Do 120C 4s 6800 mAh batteries do the trick? If so, is it possible that this will wear out the components more quickly? 
@thunderstruckperthwa4644
@thunderstruckperthwa4644 Жыл бұрын
As always a great review, I've not broken a chassis but I always have a problem with the slipper? Doe's anyonr else have this problem or is it just me?
@StevenYDG69
@StevenYDG69 Жыл бұрын
I mean I can't launch mine the way I do my fully m2c beefcake rigs. but I come pretty close to that lol, between my kraton and outcast 4s v2s I've only broken 1 shock shaft.
@evanwillard2811
@evanwillard2811 Жыл бұрын
I just picked up an outcast same platform but in bronze loving the truck so far to bad i have a bad battery for it
@pepeeltoro4570
@pepeeltoro4570 Жыл бұрын
Am i the only one having problems with CVC DIFF OUTDRIVE ? I bought 2 trucks and on both trucks running the first battery those came out. And I can't find the V2 version parts anywhere.
@exp2tr10t
@exp2tr10t Жыл бұрын
A trick worth trying that I saw Talbot do a few days ago: WD 40 for the chassis? If that doesn’t work, let’s hope RPM is listening! 🤷🏼‍♂️
@gtnhawd
@gtnhawd Жыл бұрын
How does this compete against the redcat landslide xte?
@jerryvolpini7987
@jerryvolpini7987 Жыл бұрын
Another thorough review, love how you rate these 👍 I thought you pretty much nailed it on this one! The support/maintenance is definitely 4 stars though (maybe 5). No one competes with Traxxas for support but then Traxxas has the worst warranty out there and their customer service is brutal! I mean Arrma has a 2 year warranty vs 30 days for Traxxas and like you said, they actually go overboard for their customers - that's NOT a negative thing! I agree that durability is a 2, based on your criteria, but not everyone drives like you so, that could bump it up. Those chassis though, probably more broken Arrma chassis' then all the other brands - combined! And what a pain in the ass to replace. Say what you want about Traxxas but their chassis are very durable and the parts that do break are pretty inexpensive to replace. Value, yeah 3, maybe a 4. So, yeah, think the support/maintenance score should be higher but like I said, you pretty much nailed it. Thanks for all your hard work, good stuff! 👍
@rowdyrod7870
@rowdyrod7870 Жыл бұрын
Does the 4s line need the diffs checked for shims or diff fluid before running?
@paulclancy2404
@paulclancy2404 Жыл бұрын
Nah no one has been. I havent
@zakopanypouszy9446
@zakopanypouszy9446 Жыл бұрын
Hi, do you still have kraton 4S V1 at your place? From what I've heard, the Kraton 4S V1 has the same chassis as the outcast 4S V2. I wonder if it would be possible to put the new outcast 4S V2 body on the Kraton 4S V1 chassis. Would it be possible for you to check it?
@RazorRC
@RazorRC Жыл бұрын
chassis is different
@LADYGURRLL
@LADYGURRLL Жыл бұрын
Most likely been done before but has anyone tried some cutting board material as a chassis brace, hmwpe, uhmwpe pe-1000. Pretty indestructible material used for cutting boards and snowmobile hi-fax among a myriad of other jobs.
@shakessld
@shakessld Жыл бұрын
What type of servo upgrades would you recommend? I'm new to the sport so I don't know
@RazorRC
@RazorRC Жыл бұрын
The Amazon 35kg servos are pretty good, branded animos or zoskay
@paulclancy2404
@paulclancy2404 Жыл бұрын
But don't forget need 25t servo saver or have to stick with spectrum brand
@67smit
@67smit Жыл бұрын
Out of the 3 what chassis hold up better that lasted longer
@paulclancy2404
@paulclancy2404 Жыл бұрын
Probably the Maxx
@johnlujan8706
@johnlujan8706 Жыл бұрын
I like mine and don't expect to get too crazy with it. I'd like see that comparison with the Tekno. I know someone willing to part with a used one. $?
@owen8538
@owen8538 2 ай бұрын
What s the best 4s arrma
@earlmoorhead5555
@earlmoorhead5555 Жыл бұрын
Can you really compare the teckno mt410 to a Rtr rc ? I love the teckno but it’s a kit and not really in the category. My opinion only nice review 👍👍
@RazorRC
@RazorRC Жыл бұрын
I don't know yet, I don't normally do that, but I have some ideas. We will see.
@codenamethecleaner7519
@codenamethecleaner7519 Жыл бұрын
Nope and not even the same league, center diff vs slipper, metal vs plastic chassis well full plastic truck vs metal etc it’s not even fair lol plus 450$ vs $1000 all said and done
@blademaster7879
@blademaster7879 Жыл бұрын
The only issue I've had with this and the 4s Kraton is they run HOT. I replaced the motor fan with a 28000rpm fan on both and problem solved. No durability issues as of yet.
@johngantner9314
@johngantner9314 Жыл бұрын
would you have the part number for the fan you used? Please an thankyou! ya both mine get super hot as well! temp gun showed 170 on motor after 5 min run!?!
@blademaster7879
@blademaster7879 Жыл бұрын
It's the protek 30mm HV fan, part no: PTK-2111. I bought it from Amain hobbies.
@blademaster7879
@blademaster7879 Жыл бұрын
It's a general Arrma problem. The stock fans aren't adequate or not included at all.
@RazorRC
@RazorRC Жыл бұрын
Interesting, mine don't run hot. Is your truck stock? Are you mostly driving on pavement?
@blademaster7879
@blademaster7879 Жыл бұрын
In my case it was running on grass and pavement on a 70-75 degree day. I realize when you get to mid 80s and up heat will be an issue and you have to monitor your temps. Yes, stock.
@wallacengineering8096
@wallacengineering8096 Жыл бұрын
Its very strange, I would have figured this would be more durable than the Kraton 4S V2 but I guess not. The biggest issue with the Kraton is that the chassis is just too long to be made from composite plastic. Its basically the size of the 6S now, so really that chassis should just be EXB 7075 Aluminum and thats pretty much all there is to it, it weighs too much and its too long and the stresses are too high. You would expect the OutCast to do better since its chassis is only about as long as the 3S Big Rock which is known to be legendarily reliable and durable, but I guess the extra weight and stress of the larger 4S system and 17mm Wheels/Tires is again - just too much for a composite plastic chassis. Thats pretty disappointing, because the 4S V2 takes everything that is great from the 3S Line and adds all the upgrades you would want like the steel diff input and crown gears plus aluminum shocks and so many people overpower the 3S Line to 4S anyways. Durability is the most important consideration when it comes to a 4S Bashing Stunt Truck, I mean its literally built to do the jumps, so lacking in that area is a deal breaker for me, I think its time to sell my 4S V2 and revert to the 6S Line, ya I broke my chassis too.
@joseCalderon1976
@joseCalderon1976 Жыл бұрын
Meh. This truck is for like 15ft jumps or less. I would take the Outcast 6s, Maxx V2, the Sketer, or the Tekno. Thanks for the video 👍
@earlmoorhead5555
@earlmoorhead5555 Жыл бұрын
I haven’t had any issues as of yet but I feel in long term might show excessive wear on suspension & steering components compared to the 6s line 👍👍
@RazorRC
@RazorRC Жыл бұрын
Yeah, IMO they wear out a bit faster than the metal trucks.
@Cooldibs
@Cooldibs Жыл бұрын
I think the average person doesn’t run these rc’s hard enough to have issues with a chassis bending or breaking.
@RazorRC
@RazorRC Жыл бұрын
That’s true
@someoneyoudontknow3257
@someoneyoudontknow3257 Жыл бұрын
Slipper clutch ruins the car imo
@codenamethecleaner7519
@codenamethecleaner7519 Жыл бұрын
Nah it runs perfectly fine with it even though I prefer a center differential
@codenamethecleaner7519
@codenamethecleaner7519 Жыл бұрын
I keep telling Avery looper that I know M2c can design some way to stuff a center diff in there, like a 4x4 slash center diff
@slick408
@slick408 Жыл бұрын
Regret buying this. First day out wood chip melts the driveshaft also axle clip & pin disappears. 2 failures for 2 plastic parts I wish I could upgrade to metal that come standard on 6s. Slipper clutch instead of a center diff. You pay more in the long run for a weaker machine I hate plastic rigs. I will never ever ever do this to myself again. If/when full m2c upgrades come around this it will just cost more than a 6s and weigh about the same.
@paulclancy2404
@paulclancy2404 Жыл бұрын
True but some easier practical for wet conditions
@slick408
@slick408 Жыл бұрын
@@paulclancy2404 dummys get their rc wet. So I took mine to the beach and submerged it a couple times real good haha, it broke a shock rod end before I even reached the sand. Smaller wheels less sus travel it breaks things on small rocks when going fast. Wish I got the mt410 or 6s exb instead of this. I don't like how it's worse in every category from the 6s. It's a waste of time and money
@LawrenceTimme
@LawrenceTimme Жыл бұрын
Weak. Disappointing. Too big
@hardywoodaway9912
@hardywoodaway9912 Жыл бұрын
do yourself a favor and never buy an arrma 3/4s, because you will end up buying drivetrain parts all the time.
@rcsmith5909
@rcsmith5909 Жыл бұрын
Do you like the Skeiter is a better truck? I think the value is 4stars in today’s market. Brand new truck from the ground up. Yes almost all the parts are now in other trucks but they had to R and D it for a minute. Good build over all better than average. The thing just drives so nice the geometry and weight balance are just about perfect. Of my 30 inch 45 degree ramp l can do triples about as easy as single’s. Quad once in a while. Need more room for the run up lol💪🏻👊🏻👍🏼🥳😜. Great vid. Pile of stone🥸. Mt 410 would be a great matchup!
路飞被小孩吓到了#海贼王#路飞
00:41
路飞与唐舞桐
Рет қаралды 68 МЛН
🤔Какой Орган самый длинный ? #shorts
00:42
The 1 MOD Every Arrma Owner MUST make
18:10
Kevin Talbot
Рет қаралды 294 М.
Lasernut U4 Exploring the Myths
15:36
RC Roads
Рет қаралды 714
Quick and Easy Steering Fix for Arrma Kraton 4s v2.5 - Must Watch
29:30
Is the Traxxas UDR still the BEST? Losi Baja Rey 2.0 vs UDR
10:31
AMain Hobbies
Рет қаралды 135 М.
Arrma Outcast 4S (Now THATS an RC Car!)
12:29
Derby City RC
Рет қаралды 22 М.
Choose car for Dad 😄#supercars
0:23
Earn Edix
Рет қаралды 7 МЛН
Çokk iyi bir tatktik. Gitti araba😁 #keşfet #comedy
0:15
Savas Aslan
Рет қаралды 3,5 МЛН
Машина как дом
0:31
Рубить Правду
Рет қаралды 915 М.
Skyfall mit dem Auto 💨💥 #crash #pov
0:26
tomhansenmedia
Рет қаралды 2,4 МЛН
расход топлива грузовиков СССР часть 2
0:34
Сергей Шаров
Рет қаралды 1,3 МЛН