I wish we’d have found this video before we got started with our shed it would’ve made life so much easier. Thank you for taking the time to make this video!

Thank you for covering every step of this installation. Extremely helpful.

You're a life and time saver, just wish step 7 was filmed

I’m almost done with mine. This gentleman reminds me of my uncle and it was really easy to follow along. This video gave me the confidence to do it and now I couldn’t any prouder of myself. Thanks again!

Thank you for taking the time to complete and explain step-by-step. This video was extremely helpful.

A big thank you from Canada. Made our build a breeze. My wife and I had fun on this one.

Just came across your vid, Thoroughly explained and very helpful. Just assembled mine solo, with help from your video. Now I can empty out my garage of all the lawn stuff. Thanks a lot!

Have searched a few videos on how to put my shed up, out of the past 5 or so I have looked at, the other guys skipped the most tideous of the instructions and you went over every little detail, I am currently putting mine together and your video is awesome! Thanks for making a awesome How to!

This is how you do a how to video! Great job! Most how to KZfaqrs need to take lessons from him.

Thank you for this video God gives y’all the hearts made it for any ones who are struggle to installing this product.

I just recently purchased this same exact shed and finally put it all together. Let me tell you i followed this video you guys made more than looking at the instructions that came with it. Thank you so much for the detailed video. You did a great job!

I have watched several Arrow shed assembly videos preparing to build mine, yours of by far the best! Thank you for taking the time to make this video.

You're a life saver! My shed came with no directions, and most of the numbers were rubbed off. It was an older shed, but I was able to piece it all together thanks to your video❤

You helped me build my entire shed, step by step, thanks man.....

That was fantastic. I'm just about to assemble one of this exact model shed, and you've probably saved me 3 or 4 hours and saved me from making several mistakes. Great video.

This video was very direct, everything you did was on point thanks for your help

Amazing! I’m getting ready to build mine tomorrow, I’m glad that I found your video!! I confirmed that is going to be a pain in the rear but I can handle it thanks you’ll!!

Very well done......the best video I've watched. Definitely will saved me time, confusion, errors and frustrations when I start installing my shed. This should be the reference video that the mfg should refer people to. Thank you for sharing your knowledge, directions and instructions.

My neighbor just bought one and asked me to do it for him and I want to thank you for this video it helped me so much. Thanks and God bless you all

This was a great, great help in building our shed, thank you!

Rusty, fabulous job with the step by step. I bought this step and then stumbled across your video. After looking at their instructions, glad I did. It made it more clear. Thanks.

Excellent video with the right amount of specific instructions to actually help! Most others were so fast I couldn’t get details. Bravo!

thank you Rusty!! thanks to this video after almost 3 years that boutght this Arrow got assembled. Thank SO MUCH!!!

You guy’s are amazing, thanks for this video you’ve make is easy for me I appreciate you thanks

Great teacher Rusty. Your video guided me and my wife with our build.

Thanks, it has really helped me prepare for shed build day 🤙 awesome video 👍👍

Thank you both if I hadn't found your video my shed would of spent a nother 4 years in the box it came in.

Really enjoyed watching The shed put together. Many years ago we put one of these together but it took a lot longer than that. We opted to put rivets instead of the screws and bolts so that way it would hopefully stay together longer we have heard that sometimes the bolts and screws can come loose have a wonderful and blessed day. 💚TPL4💜

Thanks for the guidance. We Just finished one, using your video. Appreciated!

Best shed assembly KZfaq on this type of shed. Super presentation. Thank you so much. I will have in on hand to assist me😊.

Great job on the video! It’s definitely gonna help me do mines tomorrow.

great video of the how to! you explained it exactly so it was easy to follow. So much to do with all those tiny bolts and screws. but comes together nicely. thankyou kind sir.

Thank you so such for your assembly instruction. Today I just started my storage shed. i hope I have done well like your.

I’m going to start this week thank you I’m in owasso I might need your guys back up thank you I watch the video 6 times I’m ready to start

Very good video I just bought a 10x 8 high point you made it look easy thanks again

Hey man good job and you're a good teacher too!

The instructions for this in the box was trash I’m so thankful you made this

Best video. Very informative.

Greatly appreciate the video. We got stuck with the simulation instructor and needed A great video like yours to turn to! awesome job👍👍👍👍👍

dec. 2023. I watched your video to assymble it. Thank you

Just bought one thank you guys so much !

You're video is great I wish the people I had start this would have listened to me to watch your video and do it as you went along with them. Of course they didn't listen to me had many things wrong on the walls and frame I had to take apart and fix their mistakes took me twice as long as it should have because of their stubbornness if they would have watched your video it would have been done right thank you know I'm watching it trying to finish up the roof now side walls are all fixed frame had some damage because of the wind storm come through ended up just drilling some new holes to get the middle supports for the walls in properly hope the roof it's now without too much problem

Thanks this will help me alot today while I build this massive Lego set 😅

Thank you for video I've had a hard time getting my roof on!

Thanks for the video guys. It helped me so much. Many thanks !!

Thanks for your video on the step by step it really helped me out 🙏👍

👍Fantastic. Great team work. Stay blessed 🙌

Great video. Step by step was very helpful. Keep up the great work

This was good to watch to give me a heads up. I will be starting on an Arrow 10 x 10 in about 2 weeks.

You did an amazing job

Thanks for the good tips and instruction!!!!! Appreciated from long beach CA!!!!!!

Thank you for the step by step fellow Okies the video was a great help tool God bless you

the best video, El mejor video, muy bien y explicado

I recently purchased this model and am waiting for rain to stop for a couple of days. Watching your procedure a thought came to me...as you assemble each of the rail members, take a piece of masking tape and felt tip pen the step number on it then put it on completed part. So, as you go to each step, you won't have to search for the part number for that step. Should make assembly go easier. Thank you for this video, it will help me put mine together...btw, I paid $500 for mine.

Thorough explanation on how to build 👍great video

That was a nice detailed video. One of the best one's that I have seen.

Thank you, me ayudaron muchísimo 👍...

Thanks so much you guys were a HUGE help i cant thank you enough!!!!!

Great jobs

Thank you so much this is very informative.

Thanks a lot your video made a great deal for me

Wow! It seemed pretty easy putting in that gable brace.

Done , thank you for this video!

Well done step by step thank you so much!

you two are awesome. i appreciate the help \w/.

Hello, again, Rusty...have run into a problem with assembly of the roofing panels. #8578 none of the holes line up, cannot put bolts in. Panel #8579 lines up ok on the rear gable...any idea what the problems is...appreciate your help. (note (my part #'s are different but placement is same).

Great Love it

Thank you guys!!! So much help! 🎉

Thank you so very much🎉

Great instructional professional video

Great video, helped A lot !!!!!!!

Thank you.

Fantastic Thank you

Thanks for the help and trust me it was a lot of help.

Great job on doing a KZfaq video the way it's supposed to be done keep up the good work👍.

thank you so you for this video.

Creat video my friend..👍

Great job man!! This is very helpful!!

👍👍informative..

Very good and detailed instructions on you part. Nice video

Really liked the video , it's going to be very helpful because the instruction are really vague. I got lost a couple of times with the orientation of the building. I couldn't tell if you were working on the front, the back or the side wall, I'm confused with the plastic "u" channel on the gable. I saw you install it then you removed it. Does that not stay on the gable permanently? Thanks for a good video.

I thought I was going to watch you put some kind of new type of assault rifle kit together. LOL

thank you so much

Thanks, I will get a metal shed. this will work with additions like rivnuts and rivets to add accesories.

Very helpful vedio.

You should get metal angle iron to replace your plastic door handles if you plan on putting a lock on it! The plastic handles only keep honest people honest. Good job!

We are puting this shed together now. Thank you so much for the assistance! The manual is not this helpful! God bless!

Good video. I will admit but, you should have explained you put the plastic door slides in wrong. They do not go inside the top channel but rather on the lips of that upper channel , Your way? the door will bind as I am sure you found out. Just friendly FYI

good work

Beware, I built an 8 X 10 Arrow on premade Concrete pyramid blocks with crossbeams and a plywood floor. Within 2 years I saw "holes" in the floor from water leakage. It had accumulated under "stuff" and damage was done. The holes provided a Critter entrance. Putting metal flashing around the bottom edge helped a lot to hold back further water damage. So some sort of water sealant needs to be put on the plywood and maybe install a pressurized wood floor. My future 10 X 10 I'm doing the Concrete slab up off the ground. But...the cost for an 11 x 11 slab was $2100. Hope this will help. Jay( North Georgia)

The directions that came with the shed were horrible, thanks to your step by step video I was able to successfully build my shed… big thanks!!!

32K views 🎉💞😁

Gracias 🙏 gracias 🙏 lo pude aser gracias a ustedes 🙏💪

I love it

I put this same one together.. I couldn't do it by myself and it was a pain in my axx

Thanks for the video. Do you have a video on building the platform?

Does it come with the screws and everything to asemble it?

How many people and how much time did it take to build?

❤🎉

Thanks for the video! I tried following the manual, and it blows!!!