Thanks for taking the time to post this video! It helps interpreting the directions. I know this video is a few years old, but the instructions and part numbers changed a bit. But the basic steps still apply. If doing this alone, some of the bolts and nuts are impossible/difficult unless you have very long arms. One trick is to use get the nut and bolt together and then use a small amount of the sealing tape (or duct tape) on the nut to "hold" while tightening on the other side.

Thanks for the video. My son and I are nearly done with our 6' x 8' shed (we have a small backyard in San Francisco.) I used your video for reference.

Y'all crushed this!! Thank you so much for this fantastic video. Like may others, I would not have been able to complete this shed w/o this video...

OUTSTANDING VIDEO!!! You made the build of my shed much easier and saved me allot of time!! Thank You!!!

Good job, I’ve been rewinding this video all day today lol ugh we spent 8 hours on this damn shed today! Had to take breaks, it was 94 here in Denver Colorado today, we still have the top middle part to put on the roof and the doors to do tomorrow after work! Ours is on a big wooden base

Thank you so much for making this video! I’m going to use it while assembling 2 of the 8’x10’ sheds! You explained everything so perfectly, I’m not afraid to tackle these bad boys at all! Then I have to assemble the 10’x12’ version!

My Mom lost the instructions and this video was how I put mine together so thank you and also shows you the quality of the video . Granted I do have construction experience but this video really really help! Thank you !

Started to put this together today (got up to the tables but it was raining and didn't make sense to put weatherproofing on yet... Probably could've gotten the roof on). The instructions suck, so this video was my salvation. Thank you!

You’re the best man, this video truly helped, I got half way with the build and I was getting confused with the instructions, but your videos made it more clearly on how to get this done now

Man I wish I found this video earlier! Spent a day working through the instructions. We have the top to build and your video was very helpful! I know we can get this done tomorrow! Thanks for sharing!

Must have been loads of pollen 😂 we counted all the sniffs. Great video and very helpful thank you!

Great video,I’m on day 2 and my daughter and I will be installing roof, I would’ve trimmed that tree first in your video because I see them branches crashing down on your well built shed, thanks for the video. We painting ours and bolting it to our deck.

I have one of these sheds in my back yard that is ready to be replaced, but we've had it well over 30 years.

That’s an upcoming project for me. It was great watching it get done ahead of time!

I don’t think I would’ve been able to complete this build without your video

Man brother thank you.....if it wasent for your great video i would have never finish....thanks a million

I'm bout to start mines.. I watched your video first.. you did a great job.. thanks.. wish me luck..

Thank you I find this very helpful as it is the same shed I'm building!

I’m glad to see that it takes only 30 minutes and 29 seconds minutes to install. Seriously, thank you so much for the video. For all your efforts, The shed company should compensate you.

Awesome video. It helped me a lot. I'm mostly done. Gotta do the roof tomorrow

I'm so happy I found this video! It's exactly what I was looking for before I started assembling. Y'all are very detailed and clear. Thank you!

Thanks I am actually working on one right now.

Thanks for this fine video! Arrow should pay you a fee👍 it was a bit of a challenge even with two of us. Some small spring clamps helped hold pieces while assembling. Also a magnetized cup holder for screws etc. For us it took easily 2 days steady. Best to you and allergies.😆

I have followed your video while looking at the instructions. Life saver and lots of irritation. Thanks

Really good points to look out for. I have had two of these sheds at different houses and they are amazingly long lasting for the money. Mine was $309 including tax. The base cost almost as much. I bought nine 2x6x8s and two 2x6x12s plus 3 sheets 3/4 inch plywood (everything weather treated. Cost was $188. Good job Tasty, great voice adds Value to the listening.

Thanks for this video. I’m using it as I do each step/page in the book

It looks good, now realizing it’s not what will work for me but glad I figured it out before buying so thankyou

Great video helped me out alot. Thanks Toasty

Great info just bought the 12x12 this will really help with assembly

Even my shed is 8x6 this video helped me a lot. thank you very much.

MAN! BIG ONE HUNDRED ON YOUR VIDEO! Extremely Helpful! BY FAR THE BEST ONE FOR THESE SHEDS⭐️⭐️⭐️⭐️⭐️✌🏾

Wow this video is amazing! Thank you!

Thanks. Best shed assembly video I've watched. It should really help when mine arrives later this week 👍

Hey my corner panels are to long after bolting in all the holes told to and the roof panels are a little to short at the top but fine at the bottom, anybody know why

Great job bro 👍🛠🔧⚒

Thanks for this up and beyond video 👍 appreciate you doing all the work showing how it's done 👍👏 gracias señor 🍻

Thanks for making this video! Great work very clear teaching.

Very helpful video,thank you. AND that was a bad ass VANS hoodie! 🤗

I've been a builder for many years and have seen quite a fair bit of sheds. The plans in ryan's package kzfaq.infoUgkxB7IXYxLzb_Ichhe45zM3Im5xfEiSp9vB have some of the nicest looking sheds i've seen in a while.

Nicely done Toasty DIY. This video was s huge help. Thanks for sharing..

Awesome video, helps a lot. Thanks.

I saw a warped roof panel in the middle of the roof. Do roof panels not always line up?

Sorry for the newbie question but does the shed come with hardware to secure the metal base to the concrete slab? I have an existing slab but I’m wondering how to secure it. Thanks.

Hey brother, I’ve watched this video like 10 times and I’m stuck on step 5. I don’t know how to correctly assemble the side wall frames. What do I do with the 2 channels & 2 angled pieces to connect them to the front & back frame?

Would it be OK if I use self tappers from the inside out? Since I have no space on the side or back due to walls being on the way. Is it possible?

how long do it take to put the shed together

Excellent video!!! Thank you!

Omg thank you for this video, i loooove KZfaq for videos like these😁

Hey man great video. Just wondering what editing software did you ise for this video. I like how you are able to film this and have the instructions up in the corner

Can this boy fit under a deck easily, or would it be impossible to bolt in the top screws for the roof? Thanks

Thank you for the video it was very helpful ❤️

I have to assemble one of these for a client tomorrow. Thank for this video

I hate the bad diagrams on the instructions guide, very helpful this video.

Use self-tapping screws or make your own holes if there's parts that don't quite line up. It even says in the manual that things might not always line up so you might have to make your own.

YOU ARE A LIFESAVER! A friend of mine gave me his storage building, used and unassembled of course. However some of the numbers are rusted making it impossible to read them. I have the instructions which are pretty easy to understand but it's hard to actually distinguish one part from another at times just by looking at it on paper. Thanks a million for sharing!

Thank u it was very helpful!!!

Me and my wife just built one of these sheds this weekend. Pain in the butt putting together. You're video is way better then the directions. Wish I would've watched youre videos instead of directions

Awesome video, very detailed

How hard was this to do? And did it go together properly? How long did it take you.

good job I like how you explain ..

Paid 99$ this video may have saved me and my sanity Thank you

How many bags of cement is need just to put the shed on?

Very helpful, Thank you!

Nice job I had problem wit the roof 1 panel came more bigger 32 and the other?

The best shed installation video,great video well explained.

I'm just curious as to how you were able to reach the bolts that tie the panels together at their highest point near the center. I'm of normal height and don't see how I'll be able to reach.

was your roof assembly square? and the overhanging metal eaves were even? I had a big problem with that.

Thanks for the heads up but I got dizzy trying to keep up with your camera..

Great video depicted well

You should've gotten paid for this video. The blueprints in the manual are very small and hard to decipher at times. Your video helped greatly I appreciate it.

If you don't pour a foundation for this, can you put it on concrete blocks if you had enough of them and set them up?

We did it...I prepped steps 1-4 but not doors..and prepping those doors would've helped to. The base took long...we used 16x16 cement blocks... it's all good too!!

we had trouble figuring out the sliding door track, which of course you guys skipped. Anyway it was helpful

Great job bro 👏

By far this is the best video I have found for this shed. Thank you so much for posting!

Dude you’re my hero I haven’t watched yet but I tried to put mine together last week and the instructions were awful, this will be conquered this weekend

What screws needed when putting the sheds together? All hardware were lost

How long did it take to build, and how many people?

Do i need to ground my metal shed? i noticed more lightning strikes in the yard. My metal shed does sit on a wooden base with 5x5 flag stone at each corner. Any advice to appreciated.

Perfect video , looking to buy one today

Great video! How much time did you invest in the build?

what is the size of the roof panels (middle panel) length and width.

I'm going to do exactly what is done on these videos👍👍👍

What size did you make the concrete platform?

Hey Toasty, Interesting how 11 people gave this a thumbs down. LOL. I always watch videos from others before starting a project and I made no exceptions with this shed. I am a pretty handy guy myself, but like to see what mistakes others make so I don't have to learn the hard way. Your video is far and away the best step by step video I found. So from one professional to another you can see why I am puzzled by the thumbs down of the 11 geniuses that apparently snapped their fingers and the shed magically appeared. I do not post KZfaq videos but am going to do a short for this shed. If you don't mind I would like to add your link for the step by step assembly. I am basically going to share some info to help speed up the process vs. taking the manual at its word. I'm not doing an assembly video. Thanks for the great video and God Bless. Chazz

We are in the middle of building this nightmare shed as I watch your video. Thank you for posting as watching this video and referring to it for the ladder half will help for sure

How many hrs did you take to build this?

Sorry how did you anchor your shed ???

My brackets for the gables are longer then yours did you have to cut it?

I was able to complete mine by myself using neodymium magnets and self tapping screws where things wouldn't line up. Turned out great!

Awesome video! Thank you for doing it. Just finished day one (quit the same time you did) Will finish roof and doors tomorrow. I didn't think I would be able to do this until I saw your video and I am pretty sure its going to be great! I've seen reviews where people claim to do this by themselves. I was going to try but I don't think that is possible. Lucky I had a helper for steps 8 and beyond. The insulation tape on the gables baffled me. Question. Did you do any caulking after the install or even any of that gap filler stuff? THANK YOU! Great Job!

Thanks bro a lot easier than reading the dame instructions 😆

we have our concrete base curing for a few days, do you think it would be okay to build the shed and then have 4 people lift and replace it once its cured?

Very helpful. Thank you👏

Thanks for the video. I just wanted to comment for anyone else it took us, two people, a total of 7 hours from start to finish. No way you can do this alone.

Thank you for the help

Thank you very much your video was very helpful

Did anyone screw down the base in a few spots before putting up the wall? Is this a bad idea or ok to do? Thank you in advance 😅

Looks good. I just did one. An wanted to see what the differences were. No rubber seal. An wasn’t sure where to use that tape. How long did it take you? I did it by myself an that’s was not such a good idea.

How big did you make your base? If I make it exactly 8x10 will it work out?