Artillery Genius - 3D Printer

Artillery Genius - 3D Printer - Unbox & Setup

Рет қаралды 96,961

Күн бұрын

Amazon Links
Buy it here: geni.us/0eBXhd
Recommended: geni.us/JustVlads
Artillery Genius 3D-Printer I3 high-Precision Desktop Dual z-axis TFT Screen
Standard Building Volume: 220*220*250mm large print size; 150mm/s max print speed. High accuracy printing quality, down to 50 microns.
Easy Installation and Stable Performance: 98% pre-assembled, easy for installation, very stable structure
Developed Function: Synchronized Dual Z System Support power loss detection and recovery. Support filament run-out detection and recovery
Powerful high quality accessories: With touch screen control, Rapid Heating AC heat-bed, Ultra-quiet Stepper Driver. And titan style direct-drive extruder to support flexible materials.
GENERAL SPECIFICATIONS
Technology: FFF
Year: 2019
Assembly: Pre-assembled
Mechanical arrangement: Cartesian Style
Manufacturer: Artillery
3D PRINTING PROPERTIES
Build volume: 220 x 220 x 250 mm
Layer height: 50 microns
XYZ resolution: 0.05 mm, 0.05 mm, 0.1 mm
Feeder system: Direct Drive
Extruder type: Single Titan Extruder
Nozzle type: Volcano
Nozzle size: 0.4 mm
Max. extruder temperature: 240 C
Max. heated bed temperature: 130 C
Frame: Aluminum
Bed leveling: Manual, Upgradable
Max. Print Speed: 150 mm/s
Max. Travel Speed: 250 mm/s
Connectivity: USB, TF-Card
Build-in camera for monitoring: No
Average operating noise: 60dB
Print recovery: Yes
Display: Touchscreen control
MATERIALS:
Filament diameter: 1.75 mm
Third-party filament: Yes
Filament materials: PLA, ABS, TPU, Flexible, Wood, PVA, HIPS
SOFTWARE REQUIREMENTS:
Operating system: Windows, Mac
Recommended Slicer: Cura
DIMENSIONS AND WEIGHT:
Assembled dimensions: 430 x 390 x 510 mm 590 mm with spool holder
Weight: 8.9 kg
Shipping weight: 10.5 kg
As an Amazon Associate I earn from qualifying purchases
My website: www.justvlads.com/

Пікірлер: 135

@JustVlads 4 жыл бұрын

New Channel: www.youtube.com/@Just_Print Buy it here: geni.us/0eBXhd Recommended: geni.us/JustVlads

@mipmipmipmipmip 4 жыл бұрын

Thanks for the book link! I learned a lot about war strategy. If you ever find out where to buy this 3D printer I'd also be interested. 😉

@snazzyriza9518 4 жыл бұрын

I see some banding in the X axis, on that calibration cube. The herringbone bone gear gets messed up easily if the bed is too hot. Because the of the filment spreading, do it on a raft. Can you do a slowed down print speed calibration cube. Then post a photo up for us. To see if that banding is gone after a print speed slow down.

@X11-35-2 3 жыл бұрын

Is it possible to get your profile?

@d.fenech 3 жыл бұрын

@@X11-35-2 I'd be interested too :D Cannot seem to perfect it! Walls are coming out great - overhangs are slightly sagging though.

@Blackazza 3 жыл бұрын

Great vid mate, i just bought one of these and after watching this I'm twice as excited to receive it. such a comprehensive look at what has luckily for me turned out to be an awesome printer, i cant thank you enough for this video it was exactly what i was looking for and it just happened to be the first i watched too!....WINNING! :) Cheers mate ;)

@brysmavic6597 4 жыл бұрын

Thank you Vlad for your honest review that lead me to this as my first printer. There are so many videos for other printers like the enders, that made my choice confusing. I now can not wait for delivery of my Genius. Thanks again for your videos!

@TMuel1123 4 жыл бұрын

Same here, I have mine now for a week.

@vizion4724 3 жыл бұрын

Nice video and that spaceman was insane :D

@OnnieKoski Жыл бұрын

thanks a lot! I just picked one of these up from a friend and i wanted to see what to expect. My old printer was an Ender 3, and this looks a lot like that but with some extra perks. Only thing its missing is an auto leveler. Maybe I can add that is somehow. Again, thanks!

@Zerokk22 3 жыл бұрын

Hi Vlad, Would you mind sharing a screenshot of your Cura settings for this model? I'm new to the game, but I thoroughly enjoy your videos! thanks!

@SurfMallorca 4 жыл бұрын

Great video!! i recently bought one myself and the light blue silicone cover for the extruder is a bit loose, how could I attempt to fix that? Silicone rubber is nearly at the same level as the extruder…. Would be great to see a video about common failures in these types of printers and how to fix them! Keep up the good work!

@Sturb100 3 жыл бұрын

Just set mine up but no filament in the box! Got to wait for that to arrive. I think some test filament would be nice.

@vahpr 4 жыл бұрын

Excellent review, thank you! Wanna get a 2nd printer and yea, you're right, this one makes older printers (like my Monoprice Maker Select Plus) look pretty dated. Think I'll get the X1 though, I suspect the larger volume will come in handy.

@robertroberts2795 4 жыл бұрын

the damn thing is not reliable

@d30124 2 жыл бұрын

thank you for your video, it helped me to setup the printer

@rdyplyr64 4 жыл бұрын

Just got this printer, pretty excited between your video and 3D Printer Nerd, it seems to be a good first printer.

@robertroberts2795 4 жыл бұрын

is it running or are you working on it

@capblueberry7899 3 жыл бұрын

Good luck. God bless. I am thinking of getting this for my first 3d printer too.

@SCABRFB 4 жыл бұрын

Just bought this printer as my first 3d printer, it is arriving this week. Any tips where I can find a good prusa slicer profile? of does it come with tuned slicer software in the box?

@swissete 4 жыл бұрын

Good review! I love this printer but have a problem with the height... is there any way to move the spool to one side?

@AndrewAHayes 4 жыл бұрын

That Amazon link takes me to books on war

@capblueberry7899 3 жыл бұрын

Haha

@AvivMakesRobots 4 жыл бұрын

Just the fact that you get a Titan head on a capable $300 machine is impressive.

@NarutoUzumaki-bj8ni 3 жыл бұрын

@Just Vlad which would you recommend me Hornet or genius I am OK with the rotary nob NB-I am noob in 3D printing

@fishingcarp2506 4 жыл бұрын

Hello i have a Qestion Witch printer you find better Ortur G1 or Genius Artillery ,and witch of the bot`s have better Print Quality ?? Tank`s

@Bajicoy 4 жыл бұрын

After printing for a while, is there more play in the printer because the rollers cannot be adjusted?

@minoxidilexperiment769 4 жыл бұрын

this printer is by far my favourite printer, I started with the enders , cr 3, cr10, prusha, I came across with the printer because I friend bought it and never unpack it for personal reasons and he sold it to me at half price, omg this printer I pay full price no problem, the quality, how easy is to assemble, no problems on glass bed sticking , most silence printers I have ever seen, the speed is crazy and the final quality is way up there, Honestly even for your first printer or as an advance user, go for it, you will not regret it,

@Doyle69 4 жыл бұрын

Mine arrived today, sadly without the filament I ordered, my 1st ever printer :)

@minoxidilexperiment769 4 жыл бұрын

@@Doyle69 I order all my filaments on ebay,

@minoxidilexperiment769 4 жыл бұрын

@@Doyle69 enjoy my friend

@Doyle69 4 жыл бұрын

@@minoxidilexperiment769 I ordered from amazon and ebay, as its my 1st im unsure which to use, so bought a couple. spotted one is PLA+, im hoping this printer accepts it. And thank you, excited to use it.

@minoxidilexperiment769 4 жыл бұрын

@@Doyle69 yes PLA + will work, all You have to do is check always the nozzle size of the pla you buy, for that printer well for most the nozzle is 1.75 mm

@tmbacz 4 жыл бұрын

I currently have one of these shipping out and it will in will be my first printer. Still a bit uneasy about my choice. Early adopter, new to 3D printing, not the biggest support community. No doubt there will be a learning curve. That being said, your vid was good timing, and makes me feel better about my impulsive new hobby purchase. Thank you for your insight. Might have to watch again in case I missed something.

@dougw9224 4 жыл бұрын

Did you get your printer yet? If so how is it?

@tmbacz 4 жыл бұрын

Doug w No, I haven’t received it yet. I’m not happy about that to say the least. I would highly recommend not ordering anything from Gearbest. Seems as if all reliable communication stops the moment something ships. It’s been way over a month since I ordered it. I’m sure it will be a terrible hassle trying to get my money back, which I am strongly considering. Thankfully, I used PayPal. If possible, I will cancel and get a resin printer instead. I’m really only interested in printing small items.

@dougw9224 4 жыл бұрын

@@tmbacz Although it looks like a good printer and was considering ordering it. it seems like it has good "bang for the buck". The only thing that turns me off is the blue cross bar at the top but its not a deal breaker. The printer is shipped is probably in customs if its coming from china. If you really rather have a resin the bail on this printer but since you have so much time invested in it I'd say stick it out.

@dillan9494 4 жыл бұрын

@@tmbacz Did you receive it in the end? How was it?

@tmbacz 4 жыл бұрын

Dillan Patel, I have, and honestly haven’t even unpacked it. I’m still pissed off about the whole thing. I was actually looking forward to not getting it. Now I’ve been really busy filling in at work. When I’m not there I’m taking care of personal issues, sleeping a lot, trying to stay healthy. At some point I’ll get in running. Want I really wanted if for was to make some terrain pieces for tabletop gaming.

@pioobjet308 3 жыл бұрын

Hello ! By the way the metal nozzle where there is next to the lamp ... but Why 5 colors? what is it for? thank you

@nitnoid24 4 жыл бұрын

I'm looking to start with a printer under $500. Just getting started, would you rather have this printer, the Sidewinder, Ender 3 or 5? This one looks more plug and play but I'm a technician by trade so assembly doesn't scare me. :)

@techlabs9385 4 жыл бұрын

How do you set this up in CURA, please?

@axelhopfinger533 4 жыл бұрын

That looks like a pretty solid machine indeed! Hope the price is also right.

@pacarita 3 жыл бұрын

Hello :)! I would like to know if it is possible to resume a printing process? For example I am in the middle of a printing process and the power goes off. Can I resume that process from where it stopped? Thank you for your help :)!

@kingsleyvictor.o12 Жыл бұрын

Thank you for your video. My Artillery Genius automatically turns off by itself when turned off. Please do you know what might be causing this issue

@RixFPV 4 жыл бұрын

My z access pushes down on the plate. I dont think it is supposed to do that. Is there a way to adjust?

@JohnDoe_1609 4 жыл бұрын

Did you get the WiFi to work or was that function not available?

@lepoloo 3 жыл бұрын

Thanks for this video that is convincing me to get one Genius. Btw which slicer do you use for this printer?

@FlipLikeA 3 жыл бұрын

Cura

@Caishtolica17 4 жыл бұрын

Tengo una Artillery Genius nueva de paquete. La pedí a USA y dice que la red de voltaje es compatible con 100/240V pero la cama de la impresora dice 110V. ¿Puede usarse la impresora con corriente de 220V?

@creativ01 4 жыл бұрын

At first, i really like your videos! :) About this printer, it looks quite good, only big con for me is the manual bed leveling. With auto bed leveling i would be really considering this one (or maybe if its pretty stable and dont need to be adjusted often). One question, is this printer running on Marlin fw or something similar?

@dillan9494 4 жыл бұрын

@Don Gray you should do a review on your experiences - you're clearly very knowledgeable about this printer. Would be helpful for a beginner like me who is thinking of purchasing it as my first printer.

@fahmialias 4 жыл бұрын

really love to see how TPU prints turns out with this printer. can you post one?

@techlabs9385 4 жыл бұрын

@Don Gray You also raised the bed temp for TPU @~80 or you leaft it at 60~ degrees?

@ArvinG 4 жыл бұрын

What filament brand is that silk chrome silver sir?

@momentsPY 4 жыл бұрын

Good review. Very nice looking printer. Not those ugly pieces of threaded rods and wires everywhere.

@Chris.Rhodes 3 жыл бұрын

Damn, I was you 1,000th like. I'm really interested in printing, and I seen this on 3DPrinterHaus and was interested in it, which led me here....I know this is an old video but thanks brother 👊

@MuhammadAli22931 3 жыл бұрын

The bed heats unevenly right above the 4 bed leveling screws and at all four corners causing prints at those spots to not stick. Anyone has a solution?

@mactastic144 4 жыл бұрын

What profile did you use?

@joesvenskason6471 3 жыл бұрын

Thank you

@seaha3750 4 жыл бұрын

Wich Slicer do you use. And can you show all your settings because i am am beginner and my prints look not as good as yours. Looks like as the layers on my prints are a bit offset not much but its not a straight wall there are some layers that are not alligned perfectly. What could i do against this issue

@dalilasamson7160 4 жыл бұрын

you should calibrate your extruder

@paulstone9755 4 жыл бұрын

Does this have a boot loader?

@gardian1701 2 жыл бұрын

That motherboard is 8bit isn't it? Though this printer is still better than my anet et5 with I think a 32bit board! Does it really make a difference? It has the same features.

@cadena9366 3 жыл бұрын

Hey if you are seeing this can you please help me. The layers are very visible and there are slight layer shifts on my new artillery genius.

@AngriestAmerican 4 жыл бұрын

Does it have USB chord connection?

@MrFreddiew1 3 жыл бұрын

General question to Hot-Heads...I have an ANYCUBIC I3 MEGA, after pre-heating the head to 200 C, using a unfrared thermometer none of the nozzle area nor the heater element are anywhere near 200 C, the aluminium block where the heater is inserted only measures 36 C...I changed the complete HH & Heater...No Change...Any ideas, is this a motherboard or power supply problem, has anyone had the same problem ?...Help appreciated.

@ebuckpc 4 жыл бұрын

Hier meine Erfahrung mit dem Artillery Genius. Auf den ersten Blick ein guter Drucker aber; er hat Schwachstellen, die nicht ohne Risiko sind, insbesondere dann, wenn er häufig zum Einsatz kommt. Nach kurzer Zeit gab es Kontaktstellenprobleme mit den Flachbandkabeln. Das Filament wurde nicht mehr transportiert und an einer Kontaktstell des Flachbandkabels waren schwarze Verfärbungen. Der bei Artillery eröffnete Call wurde sehr zeitverzögert bearbeitet und zunächst mit vielen Standardchecks versehen, die allesamt keinen Erfolg bringen konnten. Letztlich, als es darum ging entsprechende Teile zu tauschen oder gar einen Ersatzdrucker zu liefern wurde dann ausweichend an den Verkäufer verwiesen, der ja nun am wenigsten dafür kann. Der festgestellte Fehler ist deshalb bedenklich, da Schmorspuren auch zu einem Kabelbrand und der zu einen Feuer führen kann. Alles in Allem rate ich die Augen offen zu halten und sich nicht auf den Service von Artillery zu verlassen.

@FrednIRC 4 жыл бұрын

Those void warranty stickers are'nt legally enforceable even if you break the seal they are still covered by warranty only what you add in is not covered.

@MrHeHim 4 жыл бұрын

or modify But yeah lol, they even had to start enforcing it last year and give out fines for companies that put those stickers on

@Robertotvl 4 жыл бұрын

That printer looks amazing, i’m about to buy my first 3D printer but what should i buy: the ender 3 or this one

@JustVlads 4 жыл бұрын

You would have a much better experience with this printer especially if this is your first 3d printer.

@Tiamate01 4 жыл бұрын

I have ender 5 for about a week now, it's my first 3d printer and I have nothing to conplain about it, exept for the lcd display, that's open on the back (just like the ender 3 and ender 3 pro). However, this problem can be easily solved by printing it. I'm really getting amazing prints with ender 5. I'm really happy about it! Edit: Just remembered Just Vlad fixes the problem on his updates and fixes video for ender 3... Edit: I saw a lot o people complaining of the menu of the ender 5, but I didn't have any problems and am alredy adapting really well to the menu. Another thing I have to say about ender 5 is that, even if you need to assemble it, the instructions are pretty great! It almost feels like it's LEGO! Ps: Sorry for any English errors. :D

@frankmorgan1950 4 жыл бұрын

@@JustVlads if you can afford the bit extra for this it would be a good first printer( ender3 is cheaper but it does have a lot of features the ender doesnt) toss up i think about value though but set up and print this should be tons easier for a new hobbyist.

@stupidboy32 4 жыл бұрын

I have an ender 3 and I'm about to purchase this printer. I feel like this one is easier for first timers.

@RixFPV 4 жыл бұрын

I'm getting it.

@nerdCopter 3 жыл бұрын

+1👍 TPU capable?

@nathancogbill8429 3 жыл бұрын

pleeeeeeeeeeaaaaaaaaaassssssseeeeeeee do a review on the anycubic vyper

@insertgoodusernamehere55 2 жыл бұрын

i bought one and mine does not print well lol I have a lot of issues and another appears after one is solved

@Xavier_915 4 жыл бұрын

I have an Anet Et4 and looking for a second printer, should I go for this one or the X1 or an ender 3? Thanks

@raulvargas4322 4 жыл бұрын

Go for x1 if not go ahead with this one

@abhiisnotme 3 жыл бұрын

how do you like the et4 mine has many problems and it says print finished before it even starts, also the nozzle balls up the pla? do you have a solution?

@briankgarland 4 жыл бұрын

Genius or Sidewinder? Is the Sidewinder only larger or are their other advantages? Or is the Genius better, other than the smaller size?

@capblueberry7899 3 жыл бұрын

From what I know the genius tends to have slightly more hidden layer lines and a better Fillament holder

@JohnHavord 4 жыл бұрын

Did you forget to include, the links, to purchase the machine?

@tS-gh9dj 4 жыл бұрын

Don Gray for the genius all I see is the price of $330 on Gearbest could you please provide the link for the $280 version.

@claudiubalan6392 3 жыл бұрын

I tried like in video,but I can't calibrate,

@Zerophil_ 4 жыл бұрын

A 40 Minutes Viedeo that stays interresting..... Nice

@benjamenus 4 жыл бұрын

Do you have a link to the chrome filament please?

@edbox25868 4 жыл бұрын

It looks great!

@JustVlads 4 жыл бұрын

geni.us/Llny

@benjamenus 4 жыл бұрын

@@JustVlads - thank you. That's so funny... I just bought this a few days ago and mine looks nothing like that when printed. Mainly just grey, with perhaps a little reflection if the light hits it right.

@JustVlads 4 жыл бұрын

@@benjamenus try printing in higher temperatures, it makes a huge difference at least for me it did.

@MobileDecay 2 жыл бұрын

"That's an excellent bottom guys." 😏

@xthemlgdorito1507 4 жыл бұрын

Hey man can I see your cura settings?

@danielg9927 3 жыл бұрын

did you find any good settings?

@xthemlgdorito1507 Жыл бұрын

@@danielg9927hahahaha I actually am fixing my machine now, hope you found good settings

@tS-gh9dj 4 жыл бұрын

Could somebody please provide a link for a cheap and reliable website where I can buy this.?

@NotTelling51 4 жыл бұрын

I'd also like to buy this printer but not sure where the best place is ?

@abhiisnotme 3 жыл бұрын

i think banggood is actually trusted and its the cheapest i can find

@MrHeHim 4 жыл бұрын

Warranty Void is not valid in the US, falls under the right to repair act

@kevingonzalez2927 3 жыл бұрын

I bought this and its been hours still and I've yet to have a single successful print

@daniel-zt6im 3 жыл бұрын

hey there , i am considering buying this printer , how has this printer been working out for you up until now ?

@felixpaulovics5081 4 жыл бұрын

Pleaseeeeee Review the Sovol Sv01!!! ;)

@channelname3385 4 жыл бұрын

I've been waiting for a decent review forever!!!

@rudyb9543 4 жыл бұрын

some, i bought one, lets hope it prints as good as my ender 3 pro :/

@AndrewAHayes 4 жыл бұрын

Is it me or is that base dusty and dirty? 12:24

@whinegummi6329 3 жыл бұрын

Nice video, wanted to subscribe. But i am really not into tesla or workout benches. Otherwise good job

@snazzyriza9518 4 жыл бұрын

Thats a tush spool holder old school as fugggg

@alex_yt4008 4 жыл бұрын

@juanflys 4 жыл бұрын

Just sent you an email! Cheers, from Polyneo3D

@adelowooyediran9166 4 жыл бұрын

The price of this printer will count against it for now. I would rather buy the Ender 3 any day because of the same build volume. Or just buy the sidewinder X1 from the same Artillery.

@tehKaito23 4 жыл бұрын

I think this looks like a great printer. Hope they make a 2020 version with auto bed leveling and I will be like: "shut up and take my money!"

@Blackazza 3 жыл бұрын

STL Pack for those important cable relief AND spool holder parts for the Artillery Genius 3D Printer : www.happy3dthai-artillery.com/online-store/STL-Pack-for-those-important-cable-relief-AND-spool-holder-p178887983

@R34l1ty4U 4 жыл бұрын

Looks nice but at $340 USD the price should come down a bit to compete. For starters you could get an XVICO X1 for $120 USD or even an Anet A8 for $150 USD or an Anet ET4 for $230 USD.

@jboy27 4 жыл бұрын

Warranty stickers dont mean anything in the us. You can open

@Blackazza 3 жыл бұрын

Thought I should share that full range of parts for Artillery printers can be found at : happy3dthai-artillery Just google it 😉

@3sotErik 2 жыл бұрын

The void warranty claim actually goes against the right to repair act in the United States

@claudiubalan6392 3 жыл бұрын

I can't calibrate my machine

@jhonny1392 4 жыл бұрын

Well, is not a good idea to compare the Artillery Genius with the Ender 3. At least, NOT TODAY !. The reason is its price !. The A. Genius cost *more than the double* that Creality Ender 3, today and that, my friend, makes *impossible* this comparation !. Artillery Genius is beyond the doubt a much better 3D Printer than the Ender 3 and because of that this Artillery Genius cost *more than the double* than Ender 3 !. So, there is no point of comparation because of the price !. As simple as that !. Cheers.

@woutchauvaux6672 4 жыл бұрын

Where do you get MORE THAN DOUBLE? Ender 3 is €185 or €200 for the pro version, and i just got my genius for €250.

@RalfVogler 4 жыл бұрын

@@woutchauvaux6672 Where did you buy it? The cheapest I could find at the moment is 274€.

@woutchauvaux6672 4 жыл бұрын

@@RalfVogler via banggood in a group order

@ctopedja 4 жыл бұрын

if you think its user error you need to re print parts and show us, its just lazy showing cube that warped and saying its good cube, not its not...same for tolerance test piece that fused....

@cutty02 4 жыл бұрын

shhhhh…..

@paulstone9755 4 жыл бұрын

Thats kinda rude ...

@ctopedja 4 жыл бұрын

@@paulstone9755 yeah being rude for giving constructive opinion, welcome to 2019