Just took my A6 today and passed. I passed my A8 by watching his other video as well. all great things from these videos! What he says about paying attention to the answers I cannot stress enough. read the answers, then go to the diagram and eliminate. Great stuff!

I passed my ASE 6 on saturday! this video helped alot.

Just passed my ASE A6 this morning after using this video to study last minute. Great refresher and study video.

Missed my A6 by two damn questions this morning. Wish I had looked for this before hand. Gonna watch it and re take the test in 30 days.

Just took my A6 today and passed, this video helped me way more than the study guides and practice tests

Just took the A6 and passed, video helped out tremendously. Thank you very much

OL means "oh lord" I will never forget that! thanks for the awesome videos!

I passed A6 and A8 on my first attempt this past Saturday, thank you for awesome videos! They are a great help and you explain the systems better than anyone I have seen. Very much appreciate this!!

Just passed my A6 with an 88%. Thank you for posting this video and the others on your channel.

First off thank you for taking time out to record your training session a lot of important concepts are discussed and many people do benefit from the topics you share. One point of clarification that I would like to point out you mentioned a few times that was not technically accurate, Although it is minor in relation to the information you are presenting today it is an important concept that should not be overlooked. When measuring voltage drop with our DVOM we are measuring that device or conductor in parallel with that circuit and NOT in series since it is taken with perspective from the point of the metering device, the DVOM. If we place the positive lead on one side of the load and the negative on the other side of the load, that meter is measuring parallel to that circuit since current is flowing through the circuit irrespective of whether our meter is connected or not. Given that the meter is parallel to the circuit, if one of the leads were to break contact the only adverse result would be that the meter would no longer display what is occurring within the circuit. The only time we are measuring in series with a loaded circuit is if we are measuring amperage using our test leads then our meter must be part of the circuit as with a parasitic draw test on a battery. In this case the current is actually flowing through our meter which is physically in series with the circuit. If our leads were to be removed from the terminal or battery clamp, not only would we not be able to display the measurement, the circuit itself would be open and no longer functioning. This is not the case when we measure voltage which is measured in parallel to the circuit or device. I understand it is mostly semantics for the lecture on passing the ASE A6 but it is a fundamental concept that is important for a technician to fully comprehend. Although, with the use of modern day amp clamp(s), having to measure amperage in series is not as critical as it once was. But it is important to only ever clamp on (1) wire at a time if you want an accurate measurement. Thank you again for taking the time to present this material to all those searching for resource material to help take the ASE A6 Electrical and Electronics Test. Thank you for what you do and keep rocking those classes.

I've taken and passed my A4 and A5 so far on my way to Master tech, taking A6 next because of this video! Awesome video man and you definitely earned a subscriber. Hope to see some more content like this!

I passed H6 yesterday with the help of this video. Thank you! Keep up the good work.

Hi, I'm an Atech student in Oakland, working as a lube tech for Toyota. I'm taking my A6 & A7 in September. Your presentation is really good. Wish me luck.

Just took my A6 and passed today! First try, but gotta lend credit to this video, totally changed my test taking approach. Thank you!

Thank you so much. You've given me hope to become ase certified and further my passion coupled with my career. You've solved so many questions I've had for the decade I've been working on cars. You are the man

I remembered the VD’s and wrote them down as soon as I got to the test and had a couple questions that asked this. Thank you so so so much. Passed my ASE this morning! I will be watching all of your videos for the rest I still have to take.

Just passed my a6 this video helped out alot for anyone struggling just watch this video after reading about the a6 and take some practice test u will pass

Passed my ASE 6 today, this was a help. Thank you

Best ASE study videos I've seen, gets right to the point and makes everything easy to understand!

thank you. you are truly a talented teacher and have a way of explaining things that can be appreciated by many. you are very good at what you do and your students are lucky to have you. wish me luck on A6 !

i pretty much never comment on youtube videos, but i wanted to say thanks for this video, Oscar and MAT. i passed a6 this morning, and this was a great review.

Passed ASE test watching this. Everything in this video was super useful

Just passed my A6 thanks to this video! 🙌

Thanks. I passed T6 recert. Now I need you guys to a T3 class. So I can pass drivetrain.

Your video helped me understand electrical a bit more and pass my A6. Good content, thank you.

Great Videos... You are doing a great service for the Technician World!!!

You’re the best! Just took A6 today and passed! Your video was super helpful.

Taking my ASE 6 on Monday will update, thanks for the content feel a lot more confident that’s to this

Took mine today and passed.

Thank you for explaining this in a way that even I could understand it.

thank you for the video, it helped me strengthen my understanding and pass the test.

Thank you I passed my ASE A6 test today this video helped me alot.

I passed A6, IT WAS HARD AS HELL BUT THIS HELPED ALOT. THANK YOU BRO

Thanks for the great video. I watched this a couple times as a refresher and helped out a lot! Passed my A6 today with the help of this video.

Thank you brother. I passed my ASE test today!

Passed A5 and A1, going for A6 in 2 days. Hoping this video helps. AVI instructors feel like their half asleep trying to teach.

Hey I hope you see this. I wanted to say thank you for making this video. I'm about to take my ASE tests in both electrical and brakes next week. I was hoping that you had one of these for brakes? This would make an excellent and very helpful series. If not I understand. But thank you again for at least making this one.

This video helped out a lot. Great content

Thank you so much for taking the time and making this video! Helped me understand this ASE more.

Good job master oscar ,from honduras i wach your automotive trainning class tank yuo so much.

Thanks! I like your style of teaching! Need some brushing up electrical and this is best I have found so far! Not sure if I am going to actually take exam. I wlll have to take A6 & A8 and pass to take the L3 which is what I really want!

got my a1,4, and 5, im taking a6 this weekend and this video is helping a lot. out of all the courses ive taken so far the a6 course intimidates me the most -_-.

I passed my ASE A6 today i also took the A2 and missed it by 3 questions its what ever lol i took the A3 back in December and passed it with flying colors but this video actually helped me alot it was a nice refresher and A lot of good info keep up the good work i like the way you word everything

passed mine, thank you!

Take mine next week about to grind this video over an over 😂

HEY!?!? I see 61k views and only 1400 likes 😢. Send this to the top guys.

Man... I like this channel... Shits hard!!! Just work on the volume because it comes through low on laptops.

I'm going for my A6 and A8 soon this video was helpful

I hope I can pass this ASE, my man here helped me pass my A8 “by the grace” but I still need that A9 bro lol peace

Thank you for this great presentation. I love electrical, but electrical does not seem to love me. Should I see 12 v on both sides of the coil side (Pin 85 and 86) when the relay is not energized?

THANK YOU!!! Just passed!

Thank you!

excellent , can you make us a video about L1 , Thank you

Gomez you are soo funny !

This video is very helpful ty

I passed and it was heavy on wiring diagrams and very little Tech A vs. Tech B

That intro funk! I was confused at 1:08:14 . Since the voltage hasn't been consumed wouldn't that voltage reading be ok? If the red test lead was moved after the headlight that should show 0v?

Hello, Oscar. Would you consider an injector circuit a true parallel circuit? If yes, why would a shorted injector does not blow a fuse?

Q 36:41 and 36:42 the screen says 1 volt as the answer as opposed to the correct answer of 12 v as source.??? Shouldn't the answer to problem #6. be 3 volts which when it's all added up, give us source voltage which is 12v and not 1 volt for this resistor??? The answer for the 2nd resistor, I believe should've been 3 ohms of resistance! Please correct me if I am wrong! Great, Great Videos!!! I subscribe.

Mil graciaa mmi brother muy exelente ayuda en tu video, necesito un favor grande, mire este video y si le entiendo solamente que poenso verlo varias veces y quisiera hacer el test, pero en realidad nunca he Hecho uno y no se.si hay un orden desde 1 para adelante y cuales son los pasos y donde se hace De.antemano muchas gracias

What are the 4 possibilities you find. I didn't hear you say them?

Thanks brother

Two weeks ago I passed my A-6. I watched this video (or had it playing in the background) many, many times. It was an invaluable resource, along with @McCiustian and his electrical course videos. Thank you so much. You're doing great work, Mr. Gomez.

Hey i can’t see the board it is very blurry

Test light to check fuses is okay??

Good Video.

I hate using the word "hundredths" I prefer "mini hundred" or "mini thousand" or mini million

Just with this my ca pass the ase a6?

Anything on A4?

Do you have a schedule of your classes?

Tienen pagina web o cursos???

Can you do a7 hvac?

Any tips for A6 jitters?

Where i sign in for the class

How do a became o smog tec

he aint joking wear shorts and a t shirt

That was no starter in the diagram. Just sayin.

32:10

roll your sleeve up bruh