ASG CZ P-07 disassembly and reassembly

Рет қаралды 26,747

3 жыл бұрын

A detailed disassembly of the ASG CZ P-07 airsoft pistol. In this video I take it apart down to the trigger mechanism, show how the pistol operates internally, put it back together, and do a mini-review of the pistol.
Below are the specs on the gun:
Features
Fully licensed Česk Zbrojovka Trademarks
Co2 Cartridge in the grip for easy replacement. (Co2 cartridges not included)
Built-in Weaver-style Rail for tactical accessories
Blowback Design
Full Metal slide
Individual Serial Number
Innovative slide design for low weight
Adjustable Hopup
FPS Range: 328-387
Color: Black
The CZ75D is a co2 powered / high power Airsoft gas blowback pistol for CQB gaming. This Airsoft hand gun is powered bythe commonly found 12g co2 cartridge. High gas efficiency allows this gun to fire over 80~100 rounds of high power bb on a can of gas. Built in picatinny weaver rail for external attachments such as laser and tac light. Built-in hopup for bb control and enhanced accuracy and range.
Muzzle Velocity: 1 Joule / 330~390 FPS
Length: 185mm
Weight: 815g
Gas System: 12g Co2 Blowback (Co2 cartridges not included)
Magazine Capacity: 16rds
Materials: Nylon Fiber, Metal Alloy
Hopup: Yes, Adjustable
Power: 12 gram CO2 Cartridge
Firing Mode: Semi-Auto, Safety
Package Contents: Gun, Magazine, Manual
Manufacturer: ASG

Пікірлер: 78

@angarindustrial4185 Жыл бұрын

Thanks for taking the effort to guide us, dude. you rock!

@Ellis14 Жыл бұрын

Yo, tysm for the video, my trigger spring snapped and I didn’t know that was the problem until i disassembled it. I really like the feel of shooting this gun so thanks so much for helping me fix it :)

@zicmu6879 Жыл бұрын

Thank you so much. I ve been in a issue after changing all my seals on a ASG Sit Duty One and the link trigger didn't reach the hammer after pressing the trigger from 1 month now. Nobody can helped me but you! ( Even ASG didn't responded me)It was this flipping spring the fault ! ( 18min36). Thank you so much you saved my day !

@cathipillar 3 жыл бұрын

Thank you so much for posting this, it helped me so much when I had to clean my gun

@fpsentertainment3091 3 жыл бұрын

You are welcome!

@Tantrum791 3 ай бұрын

Big help! Thank you

@bartekguziuk6526 Жыл бұрын

this wideo teach me about my replica and now i can clean it and change parts thank u so much my first disassembled replica :)

@ccsweden1045 3 жыл бұрын

Tack! Thanks! Your video help me!

@klavsvasilis 2 жыл бұрын

Thanks. Reassembled mine just now... When cartive got empty- i kept shooting not knowing better and got full barrel of bbs stuck one on another... So had to bore em out. Dunno if i did damage barrel- thats yet to be seen but accuracy didnt impress. Exactly the same interior for 4.5mm. So it was useful video, thanks again.

@jumpercz6461 Жыл бұрын

You helped me so much thank you ❤.

@fpsentertainment3091 Жыл бұрын

You are welcome!!

@paninkognito6526 9 ай бұрын

thank you so much i had same problem with it 😄

@user-sm4vh2dh7y 2 жыл бұрын

Спасибо друг.

@davejohn23 Жыл бұрын

Thanks to your video I have just repaired my pistol...thanks

@XX-io5eb Жыл бұрын

Thanks a lot =)

@onurdurak3750 3 жыл бұрын

Merci

@gnewas1753 2 жыл бұрын

Hi i have problem to assembly trigger by that i mean idk where to set the spring to get trigger always in place

@Potatoviews87 3 жыл бұрын

Thanks! If I want to replace my slide release button,do I first have to remove the slide or can I just 'pop' it out?

@fpsentertainment3091 3 жыл бұрын

You should be able to just pop it out. That said it does require a little prying.

@kamelfrancisco8973 Жыл бұрын

Thank you very much. Only your video to help me in the world :)

@MidwestAmericanBoy 7 ай бұрын

I got my CZ in a mystery box and I loved it. But after a while it stopped firing, I pull the trigger, the hammer drops, and it doesn’t shoot. It might have been my fault because I would dry fire it constantly

@alexbozas887 3 жыл бұрын

My trigger assembly failed after 6 months. I really like this pistol, and found it extremely accurate and powerful, when.it works. The build quality and reliability of these air pistols is very poor, despite its great feel and performance. I really enjoyed plinking targets whilst it worked. Not sure I.ll achieve anything by stripping mine as there is virtually zero support from the agents in my country.

@fpsentertainment3091 3 жыл бұрын

I agree, the internals are pretty shoddy. They are mostly made of pot metal.

@kari969594 2 жыл бұрын

Thanks for your upload! Helped me a lot! Is it a 6mm or 4,5mm?

@fpsentertainment3091 2 жыл бұрын

Its airsoft 6mm

@kari969594 2 жыл бұрын

@@fpsentertainment3091 how funny, you helped me with the same problem in 4.5 mm version. Thanks for answer as I was wondering where the hell is my hop up…

@MMAGUY00 Жыл бұрын

Hello my friend. Thank you for the video. My cz was shooting all over the place and when i took it apart i found out that the rubber that is on the barrel was damaged. Do you know where I can find a new one?

@fpsentertainment3091 Жыл бұрын

The hop up rubber...hum i dont think they make that for individual sale however you might be able to use the hop up of the asg cz p09 and it might be compatible

@luanvanniekerk5139 2 жыл бұрын

Any suggestions for fixing a leak at the green seal ?

@fpsentertainment3091 2 жыл бұрын

Honestly, besides applying lube to all sealing parts...I don't. Wishing you much success though!

@matejkrocil3284 2 жыл бұрын

When I put a new CO2 tube in, all the co2 inside leaks instantly. Any suggestions?

@fpsentertainment3091 2 жыл бұрын

The nozzle valve may be jammed open. Thats the little thing I had to slip back in under the hammer and slide toward the end.

@_aiedail_9714 Жыл бұрын

19:17 The little wire/spring from the trigger that is supposed to hold the black part in place got lose and mannaged to get out of the trigger and i don't know hot to get it inside again. It also seem little bent so even if it is in trigger (without the spring because i can't fit them both inside) it doesn't hold the black part can somebody help? Edit: proceeded to assemble the gun it just feels kinda wiggly and shaky now

@chrishall2746 Жыл бұрын

Do you have any suggestions for getting the mag out. It is stuck like it's jammed.

@fpsentertainment3091 Жыл бұрын

Try racking the slide back and forth. If that doesnt work try using a dowel to push out any ammo that may be stuck partially between the mag and barrel

@BlaastMaster 4 ай бұрын

18:51 mine doesnt have any spring or anything there, it just sits on there,

@_phosphorus 3 жыл бұрын

12:13 Yeaah, this part has just broken in my model, do you know if it's possible to buy it somewhere or maybe you know at least how this part is called? It would make my search easier.

@fpsentertainment3091 3 жыл бұрын

There is a parts list on the asg website and some parts can be special ordered through evike.com. It did however, take over 4 months to get the springs I ordered...fyi

@fpsentertainment3091 3 жыл бұрын

There is a parts list on the asg website and some parts can be special ordered through evike.com. It did however, take over 4 months to get the springs I ordered...fyi

@_phosphorus 3 жыл бұрын

@@fpsentertainment3091 thanks a lot, now i know everything

@bryanrivera5562 Жыл бұрын

How to increase power shot more c02?

@fpsentertainment3091 Жыл бұрын

Power is fixed, however, the first few shots from a new co2 tend to be more powerful. If you were to enlarge the nozzle somehow that might increase power but also wear on the gun.

@osmanguven8805 3 жыл бұрын

I have the 4,5steel bb version . i got problem today i finished the magazine and put out the mag and co2 tube then i realized trigger and safety stuck , i couldnt squeez the trigger and couldnt drop the hammer also safety doesnt work . When i turn up side down the gun i can pull the trigger and hammer drops but only in single action its not work in double action . by the way magazine doesnt fit in gun anymore , i dont know what happed but i think one bb stucked some where inside the gun

@fpsentertainment3091 3 жыл бұрын

I had the same problem. For me it was because the trigger spring broke and a piece of the spring jammed the trigger right side up but would move when upside down.

@osmanguven8805 3 жыл бұрын

@@fpsentertainment3091 so what do you think about magazine ? My magazine doesnt fit in to gun anymore

@fpsentertainment3091 3 жыл бұрын

@@osmanguven8805 not sure, you might need to pull it apart to see what is wrong. As long as you can pull the slide back you should be good to follow the video guide above to disassemble it.

@osmanguven8805 3 жыл бұрын

@@fpsentertainment3091 i'll try when i get tools , thanks

@Trident66666 5 ай бұрын

almost cant assembly my gun back lmao. thanks!!!

@landonblanton8215 2 жыл бұрын

I’ve completed the guide but my hammer doesn’t go back up

@jakevalek6030 2 жыл бұрын

ever figure it out? Mines doing the same thing. I assume it's the trigger

@landonblanton8215 2 жыл бұрын

@@jakevalek6030 my trigger spring snapped

@Lucas-ve2em Ай бұрын

The screws won’t come out

@ToPrime35 2 жыл бұрын

I have problem when fire blowback dot put Hammer down to fire again?

@fpsentertainment3091 2 жыл бұрын

It might not be blowing back all the way, either low c02 pressure or a problem with the valve/slide

@ToPrime35 2 жыл бұрын

@@fpsentertainment3091 could be co2 because I didn't put all the way in first and it leek a bit and it wasn't loud as I was thinking it will be. I will try with new co2 first

@riot-_-snipez-_-8017 Жыл бұрын

Anyone know why my hammer isn't springing forward to shoot when I pull the trigger?

@davejohn23 Жыл бұрын

Heyyy...did you fix this... putting mine back together with the same problem?

@riot-_-snipez-_-8017 Жыл бұрын

I have not gotten it fixed. Might be a spring issue tho. Haven't looked at it in awhile so I'm not sure

@davejohn23 Жыл бұрын

@@riot-_-snipez-_-8017 Thanks ,.....I think it may be something to do with the bump he mentions under the hammer, he has problems releasing it too. If you press it in with a pen the hammer releases. I'm not ready to give up just yet 😁

@yn8814 2 жыл бұрын

I managed to get it apart but a bunch of little springs and parts fell out and I broke the trigger spring, oops

@fpsentertainment3091 2 жыл бұрын

Yikes sorry man!

@yn8814 2 жыл бұрын

@@fpsentertainment3091 it’s not ur fault don’t worry I was just too rough 😂😂

@frankreynolds6831 4 ай бұрын

So these can be upgraded?

@fpsentertainment3091 4 ай бұрын

Not likely

@qytkv6546 2 жыл бұрын

i have one and i’m wondering can u convert this to full auto?

@fpsentertainment3091 2 жыл бұрын

Not without completely re-engineering the internals.

@qytkv6546 2 жыл бұрын

@@fpsentertainment3091 ok and thank you but last question do you know any websites that sell extended mags for this gun

@fpsentertainment3091 2 жыл бұрын

@@qytkv6546 not to my knowledge...in fact I think this model has been discontinued.

@qytkv6546 2 жыл бұрын

@@fpsentertainment3091 do u what I have to do to change this to fully auto like what specific internals because I’m kind of tired of the semi auto and it would be more fun in fully auto lol.