www.AsktheBuild... host Tim Carter shares a quick lesson to help you out of a tough spot when working with plumbing vent pipe. Discover more plumbing information at askthebuilder.com: www.askthebuild... www.askthebuild...
Пікірлер: 100
@askthebuilder5 жыл бұрын
I've been a master plumber since age 29. I can call you on the phone to answer your plumbing vent and drain questions. I can also draw your plumbing isometric plans. Go here for the phone call: shop.askthebuilder.com/products/15-Minute-Phone-Conversation-with-Tim.html Go here to have me draw your plumbing plans: shop.askthebuilder.com/draw-plumbing-plans/
@askthebuilder16 жыл бұрын
Thanks for your kind words. They sure help temper the disparaging comments made by some others. I encourage you to start loading some of your own videos, as I would love to learn from you! As for that Boston loop, all I can say to do is Google the term and see if anything is written about it. I'll go try to do that now.
@elitedonk14 жыл бұрын
thanks for the videos they help alot im doing my apprenticeship in plumbing at the minute but finding it hard with the recession and what not
@texmexmaniac115 жыл бұрын
Fair enough. I'm all for proper installation and your solution is the most stringent in this situation. One that I would agree with................ For the person that would go the extra mile, checking with State and local codes would benefit someone on knowing if an installation is legal or not.
@askthebuilder16 жыл бұрын
I don't now, but will soon. I have a huge project it the works that will chronicle the construction of a house from start to finish. Hundreds of new videos are planned.
@TheAlanHancock13 жыл бұрын
@wildwoodtop i may be misunderstanding the question. but i am a plumber here in north carolina and the maximum distance from the toilet to the vent is 12 feet here. It is determined by the trap size. 1-1/2" is 6ft 2"is 8ft and 3" is 12 ft. Hope this helps.
@skullfoot15 жыл бұрын
wow... great info here guys! I'm in my 2nd semester of L.A Trade tech Plumbing. This semester is all codes! I actually understood a bit. Since I studied ch. 1 a week ago In the U.P.C book. thanks ask the builder,I will watch all your videos! best,Jeff
@askthebuilder15 жыл бұрын
Thanks for the comment. The only thing missing from it is the exception where it's fine to do if you then add the code-approved Simpson Strong-Tie metal wraps that compensate for the lost wood.
@askthebuilder14 жыл бұрын
@sterr1 Glad you made that comment. Next video I'll scan my Master Plumber license for you. I was a card-carrying Master Plumber for about 20 years before starting my AsktheBuilder column and website.
@LUNA71CHEVY16 жыл бұрын
Mr. ask the builder great video .you are a lot better than a lot of other how to guys on youtube.I'm a plumber in Phoenix and i like to see how other people do plumbing repairs and installs.normally they give wrong information or scary how to tips but you are the best I've seen on youtube.one more thing here in Phx they call a island vent a Boston loop do you know why?
@askthebuilder13 жыл бұрын
@Skorlang Correct, but if you're venting each fixture separately then tying into a larger vent, you're fine.
@Skorlang13 жыл бұрын
Thanks Tim, I knew that. I was responding to midlantic1's post saying you could vent an entire bathroom on an 1 1/2" vent.
@askthebuilder16 жыл бұрын
Yes. I have done that on occasion. The code sometimes calls them loop or island vents. Grab a copy of a code book from a plumber to see it. It is impossible to describe in this space.
@midlantic113 жыл бұрын
If it's just a lavatory with an 1 1/4" trap you can drin it right into that tub vent, thus making the vent for the tub a wet vent. The code requires us to increase the pipe size by one size, in this case to 1 1/2" which is the size of the vent in the wall. No need to back vent the lavi at all. The national standard code allows us to vent an entire 3 piece bath on an 1 1/2" vent
@askthebuilder15 жыл бұрын
To replace the air in the drain pipes that's pushed away by the rushing water. Go to my website and read all my past columns about Plumbing Vent Pipes.
@askthebuilder16 жыл бұрын
Wow! I just went there, typed plumbing in my search engine and BAM! Nearly 100 search results showed up, with two of them being category pages - Plumbing Design and Plumbing Supplies. You might want to go back.
@askthebuilder13 жыл бұрын
@wildwoodtop Most jurisdictions here in the USA only permit 36 inches between the toilet and it's vent. There can sometimes be exceptions.
@askthebuilder16 жыл бұрын
As I said, go to my website and read my past plumbing columns. This is not an easy task, and you need some specialized tools. Then there are the mandatory inspections. Go get a code book from your local inspector and start reading it. That will help you see how complicated much of this can be.
@askthebuilder15 жыл бұрын
Study hard Jeff as we need great plumbers out there. It's a great vocation.
@askthebuilder15 жыл бұрын
Thanks for the suggestion. No water hammer at all in this installation. If you want to know the *real* reasons for water hammer, I urge you to go to my website and read all my past columns on this topic. You might be really surprised as to the cause.
@EdwardMarshall198214 жыл бұрын
@AsktheBuilder Or if your lazy like me. :) You can always run a studor vent, but keep in mind that they need to be installed under a cabinet and out of the wall. This will give the same aesthetics without having to curse yourself when you have to replace it.
@askthebuilder13 жыл бұрын
@Skorlang Not too long ago in Ohio you could do that. It would have to eventually tie into a 3-inch vent or larger before exiting the roof.
@russianwol15 жыл бұрын
I think it's a bit misleading saying that the plumbing code requires that the vent pipe connection to be "right about here" since the connection can be made anywhere higher than original "problematic" location.
@texmexmaniac115 жыл бұрын
Fair enough. I agree with that statement as well. Many municipalities allow the homeowner to do their own work...... Is it safe? In most cases, it might be since the Jurisdictional Authority has to inspect the installation anyway. Just trying to give my two cents in for good general tips.
@texmexmaniac115 жыл бұрын
I've got an easier solution: Just run a trap arm (or dirty arm) off the vent at 18" above the floor and stub out for the lav drain. The plumbing code will allow smaller fixture unit traps to "dump" over larger fixture unit traps. In plumbing terms, we call this "wet venting". It will eliminate the need to run an independent vent for the lavatory. Saves time, money and space. Steve / master plumber
@brettmiller176911 жыл бұрын
@emmalee chances are you have pressure reducing valve gone bad or there is a valve restricting flow somewhere !! as for the video why nothch studs when u could have tied it in ,in the attic ?
@evenflow32565 жыл бұрын
Who said anything about notching the studs?
@askthebuilder15 жыл бұрын
You can't assume wet venting is permitted in all states. For many, many years it was prohibited in Kentucky.
@slickrickjones2 жыл бұрын
I have a 4 inch stink pipe in my bathroom. IT IS SO IN THE WAY OF EVERYTHING! Can I cut it off below the floor, put a 90 on it under the house and run it up along side my house?
@askthebuilder2 жыл бұрын
It depends!!!! I've got lots of questions. I've been a master plumber since 1981. You should seriously consider investing in an affordable call with me about this before you make a huge mistake: shop.askthebuilder.com/15-minute-phone-or-video-conversation-with-tim/
@askthebuilder15 жыл бұрын
Yes. Furthermore, you need to make sure that sink stack can handle the extra fixture load. Don't know what that means? Look it up or call in a pro.
@MisterTwister8816 жыл бұрын
This is a perfect example of why we need a 50 state code. That could be wet vented and work fine.
@Electrotime16 жыл бұрын
hows the water supossed to flow up the pipe?
@askthebuilder14 жыл бұрын
You could have the wrong anode rod in it. Go to water heater manufacturer websites and read if you need an aluminum or magnesium anode rod.
@askthebuilder16 жыл бұрын
I don't understand your comment at all. If you mean a mechanical vent, I prefer to use a natural vent whenever possible. A mechanical vent can malfunction.
@texmexmaniac115 жыл бұрын
Hello. I don't know what state you are in, but most states prohibit the installation of plumbing systems from someone who is not licensed. It is a very serious and dangerous task that need to be handled by a professional.....
@askthebuilder15 жыл бұрын
In this case it was so easy to tie into the existing vent line. The biggest problem with mechanical vents is they can fail. Traditional vents work all the time unless some idiot drops a tennis ball down the roof pipe. I've installed mechanical vents in an island sink and they are suitable, but no real long-term substitute for a traditional gravity vent. Your mileage may vary.
@askthebuilder13 жыл бұрын
@Skorlang Beats me....... Besides large cities like Cincinnati where I was licensed can modify and change the code to their liking. Many local governments modify the codes.
@Electrotime16 жыл бұрын
what happens if the copper pipe goes all the way up the ciling?
@askthebuilder16 жыл бұрын
Get a group of drain-cleaning plumbers together and they will lobby hard against many of the wet-vent proposals. Gunk from other upstream fixtures has clogged many a downstream one in wet-vented setups. I am not saying all setups are bad...... I have two code-approved wet vent situations in my own home.
@askthebuilder15 жыл бұрын
The second part of your comment is incorrect. If you want to really understand plumbing vents, how they work, where they are behind walls, etc. go to my website and read all my past columns about them. I'm a licensed master plumber among other things so you know.
@askthebuilder16 жыл бұрын
You need to go to my website and read ALL of my plumbing installation columns.... That will be a big help to you.
@askthebuilder15 жыл бұрын
Steve, I have to disagree with you until you provide the documentation to prove your statement. *Many* states allow homeowners to do their own plumbing. What you're saying is that the average person can't go do plumbing for others without a license. The person clearly stated this was an owner-occupied situation. Tim - Master Plumber
@megadaveice11 жыл бұрын
so can vents go as high up as you want to make them?
@evenflow32565 жыл бұрын
Good advice
@askthebuilder2 жыл бұрын
You can get more: Get unlimited FREE tips like this each week by subscribing to my newsletter at www.AsktheBuilder.com
@trader89115 жыл бұрын
well done.
@askthebuilder16 жыл бұрын
It doesn't....... Air travels down the pipe from the roof. You should go to my website and read all about vent pipes to learn what they are for. You will be amazed at what you discover.
@wildwoodtop13 жыл бұрын
How many feet can the air vent stack be from a toilet
@askthebuilder16 жыл бұрын
Go watch it again......... Pay attention at 18 seconds into the video........
@askthebuilder15 жыл бұрын
Steve, you forgot to add that local governments reserve the right to *modify*, ignore, or adopt as stated both the Uniform Plumbing Code as well as International Residential Code. I'm not trying to fight with you, I just want people to realize that many, many locations allow homeowners to do their own work as long as they take out a permit and get the proper inspections.
@askthebuilder15 жыл бұрын
Thanks for the comment. Sounds like you know a little bit about the topic. I went to your channel and not one plumbing video. How about you take the time to share your plumbing knowledge via some videos?????? Focus your energy on videos rather than the keyboard. :->
@Radnally8 жыл бұрын
Thanks. I've learned a lot from your videos.
@askthebuilder2 жыл бұрын
Thanks! You might want to do two things: 1. Subscribe to my FREE newsletter at www.AsktheBuilder.com 2. Start watching my LIVE streaming videos! Lots of fun and you get to ask me questions in real time. Be sure to turn on NOTIFICATIONS about when I go LIVE.
@katykab00m4 жыл бұрын
Thank you!!
@lenny111413 жыл бұрын
wont that big kind high for the water to go up
@Electrotime16 жыл бұрын
wheres the sink drain into if that pipes in the way?
@askthebuilder11 жыл бұрын
Go to my AsktheBuilder website, the dot com one. I have about ten columns all about plumbing vents there. READ and become educated. I'm a master plumber as well as a master carpenter, so I know a little bit about plumbing vents. :->>>>>>
@jolldoes15154 жыл бұрын
Can I vent a toilet on a 1 1/2 or 2 inch PVC. Thanks
@askthebuilder4 жыл бұрын
Yes, an 1.5-inch pipe can vent a toilet. Not an issue at all. Be aware it's best for the house to have one full-sized vent. Read all about those on my www.AsktheBuilder.com website.
@jasonblack2138 жыл бұрын
how many 90 degree turns are you allowed in a vent pipe for like your sink. wash machine and what not?
@askthebuilder8 жыл бұрын
+Jason Black Pretty much unlimited in all areas I've worked in. You want to MINIMIZE them so you're following Best Practices when plumbing.
@jasonblack2138 жыл бұрын
Tearing out a wall and a stack gas pipe was behind the wall. Just want to put 2 90 degree turns even with each other but 4 foot apart. So I still sould be ok?
@askthebuilder8 жыл бұрын
+Jason Black You should be, but if you want a definitive answer, you'd have to take photos of the situation and talk to me on the phone after ordering this. I'm a master plumber besides being a builder: shop.askthebuilder.com/products/15-Minute-Phone-Conversation-with-Tim.html
@twinbrw246 жыл бұрын
The PVC plumbing pipe, does it have to passed through the roof, or could it stop in the attic.
@frankyhernandez40385 жыл бұрын
Belinda's Life has to pass through attic
@levelgx3 жыл бұрын
If your code allows air amititance valves, you can
@askthebuilder2 жыл бұрын
It MUST GO THROUGH the ROOF!!!! Watch my NEW live stream videos! Subscribe to get my FREE newsletter here: www.AsktheBuilder.com
@pbr242413 жыл бұрын
@wildwoodtop UPC code 6 feet
@MattyHild14 жыл бұрын
@AsktheBuilder -Zing!
@triponmsn11 жыл бұрын
forget that. Just drill one hole straight up and make connection in attic.
@briandjordjevic99695 жыл бұрын
triponmsn he could be on the first floor
@mickles2148615 жыл бұрын
that 15mm copper pipe in the stud could hav been clipped better, wouldnt be suprised if there was a bit of water hammer
@Skorlang13 жыл бұрын
What was Ohio using, the IPC?
@briandjordjevic99697 жыл бұрын
Nice tip
@askthebuilder2 жыл бұрын
Thanks! You might want to do two things: 1. Subscribe to my FREE newsletter at www.AsktheBuilder.com 2. Start watching my LIVE streaming videos! Lots of fun and you get to ask me questions in real time. Be sure to turn on NOTIFICATIONS about when I go LIVE.
@Skorlang13 жыл бұрын
UPC code requires a 2 " vent on a toilet, therefore an 1 1/2" vent is inadequate for a bathroom.
@mmedefarge14 жыл бұрын
I have drug dealers who live just below me. I heard them fooling around by what I believe is the air vent pipe by the toilet. Since then I get not only feces odors but strong ammonia fumes as well as strong acidic fumes. I've had the health dept., & the fire dept. here but unless they are doing it while they are here, there's nothing they can do. The fumes are quite suffocating. The landlord isn't interested. What could these tenants have possibly done to the plumbing for this to happen?
@LeeHill667 жыл бұрын
Or just run the vent though the top plate and make the connection in the attic.
@askthebuilder2 жыл бұрын
Truth. But what about combination vents???? Thanks! You might want to do two things: 1. Subscribe to my FREE newsletter at www.AsktheBuilder.com 2. Start watching my LIVE streaming videos! Lots of fun and you get to ask me questions in real time. Be sure to turn on NOTIFICATIONS about when I go LIVE.
@ralphadams91139 жыл бұрын
Why not just install an AAV (air admittance valve)?
@askthebuilder9 жыл бұрын
Great question Ralph! Here's the answer. Can you give me examples of mechanical things that have *never broken*? Traditional vent pipes open to the atmosphere have nothing in them that depends on moving parts.
@ralphadams91139 жыл бұрын
I suppose anything can fail, but I've installed a few of them over the years and never had a problem yet. They are code accepted in my area and I expect that they wouldn't be if they were prone to fail. Oatley makes 'em so I trust 'em.
@askthebuilder9 жыл бұрын
***** You bring up the exact reason why I don't like AAVs. I think many, including code officials, tend to look at the time line too myopically. My experience of working on houses that were built in the late 1800's in Cincinnati, OH that had nice 4-inch cast-iron vent lines that were wide open is jading my opinion. I know the AAVs will fail in time. That's a known fact since all mechanical things fail. I believe they're in the code because they save time and money. Kenny Chesney wrote a song about this, "Only time will tell, but it ain't talkin' "
@jason-kd8be6 жыл бұрын
Ask the Builder a studor vent is allowed in my area but must be accessible in case it fails. And as far as the revent it has to be at least 6 inches above the flood rim of the fixture
@Scott-eo7lj6 жыл бұрын
Ask the Builder They are required to be accessible. With a little Teflon and elbow grease they can be replaced in a matter of minutes. Also you didn't mention in the video that the horizontal vent has to be 6" higher than the flood level of bathroom. 42" and up
@ryancoxey13276 жыл бұрын
Why are vent lines so big? If we just need to break a suction, why can't we use like .5" pipe?
@iLikeC00kieDough5 жыл бұрын
Ryan Coxey they clog easier
@askthebuilder2 жыл бұрын
You can use 0.5-inch. But they could CLOG easier from debris.
@texmexmaniac115 жыл бұрын
Again, checking with State and Local codes will determine if the homeowner has the right to undertake such a task. The Uniform plumbing code clearly states in Chapter 1 Administration; Section 103.1.1 of permit requiring for plumbing installations. The protection of the public health, safety and welfare from potentially dangerous results from improper plumbing situations is the utmost importance. Only experience licensed plumbing contractors are properly trained to install such plumbing...
@rschilling7411 жыл бұрын
The vent pipe is not for water.. It is to vent the air in the lines.
@jamiebrierly31076 жыл бұрын
Are you still around Cincinnati! I am building a home and I am in a pickle! Is there anyway I can contact u for a cpl questions.
@askthebuilder2 жыл бұрын
Nope. I now live in NH. But I do Phone Coaching Consults every day: shop.askthebuilder.com/15-minute-phone-or-video-conversation-with-tim/ Watch my NEW live stream videos! Subscribe to get my FREE newsletter here: www.AsktheBuilder.com
@askthebuilder16 жыл бұрын
You better get out your code book my friend. Not all places allow wet venting. I suggest you start taping videos of your own to share all of the knowledge you seem to have. I went to your channel and there are no plumbing videos at all.
@askthebuilder16 жыл бұрын
Well, I used to be in Ohio, but now am in New Hampshire. Where are you? I went to your channel and you are invisible. Jaykob85, you seem to know a little about plumbing. I went to your channel and there are no videos of yourself sharing your knowledge. Instead of spending all this time making comments on other people's videos, how about investing that time making your videos so we can comment about your techniques?
@slacker370711 жыл бұрын
Don't tell them,Hell like their going to see it after they sheet rock
@sterr114 жыл бұрын
You should have a plumber doing this video.
@askthebuilder15 жыл бұрын
Uh, you need to be all eyes. You need to go read. :-> My website is not set up to be like books on tape.