ASM - Air Shift Module Functions and Programming Overview by Trevor Schnitz of Schnitz Racing

Рет қаралды 2,667

Жыл бұрын

Trevor Schnitz goes over the Air Shift Module Programming.
The Air Shift Module is a single solution for air shifter kits on motorcycle, powersports and off-road applications where a precise engine kill is required. Digital display, adjustable kill times per gear, auto-shifting and direct shift solenoid control allow the ASM to control all aspects of your air shift system.

Пікірлер: 18

@Dragbikeracing Жыл бұрын

Great video! Easy to follow and clear instructions!!

@schnitz_racing Жыл бұрын

Great to hear!

@markgray9004 Жыл бұрын

Need a video pointing out exactly what wires go to what wires on the bike from the unit

@christart8461 7 ай бұрын

After you program, everything in the module.. and you put it in auto shift.. I’m guessing you have to turn it back to the “on” position, correct ? And then it’s ready to take down the track?

@schnitz_racing 7 ай бұрын

Yes. You'll flip the switch back to the on position after the burnout. I'd suggest setting it for a low RPM and testing first. Then, go up in RPM.

@obiwanthedon9053 Жыл бұрын

I have a question, im gonna attempt to use this air shift module with a pingel electric shifter instead of an air shift.. my only concern is the purple and brown wire mentioned in the video, could I simply not hook those wires up to basically ignore the air part of the module? Everything will work fine otherwise just wondered if it can be used without those wires hooked up

@schnitz_racing Жыл бұрын

Yes, the ASM can be used as an engine kill module only. You can leave the brown and violet wires disconnected (be sure to tape them up).

@fireblade5542 10 ай бұрын

Hi, can this be used on a 2015 s1000rr that has a factory fitted quickshifter just for autoshift? If so is there a wiring diagram?

@schnitz_racing 10 ай бұрын

Unfortunately we do not have a wiring diagram for the BMW. We have not installed one ourselves on the S1000RR.

@danievaneps 10 ай бұрын

A friend of mine used from 2008 gsx r 1000 on his 2017 bmw s1000rr

@chriscastaneda1059 Жыл бұрын

What all needs to be changed to use auto shift mode? Does the input polarity need to be changed? The previous owner of the bike was using the air shifter, but i want to use auto shift mode. It's a gen 2 busa bracket bike.

@schnitz_racing Жыл бұрын

You just need to set the ASM to Auto Shift. That's it! Once in auto shift mode, you can select shift RPMs for each gear. Check/set those and you're ready to go.

@chriscastaneda1059 Жыл бұрын

@Schnitz Racing Where does the green wire lead to the previous owner said it may have disconnected or possibly broke. Tried auto shift mode, and after 1-2 shifts, it jumped real bad and almost felt like it upshifted.