No video
Assembling the Dual Patchfeed (POTY) for QO100 (ES-Hail'2)
Рет қаралды 10,283
4 жыл бұрынIn this Video im showing you how I assemble the Dual Patchfeed aka. POTY.
This Feed can be used when you want to work on QO100.
As far as I know:
The Designers of this Feed were Mike Willis, Remco den Besten and Paul Marsh aka. UHF-Satcom. Please write me if this is wrong then ill change it.
Special Thanks to the Guys mentioned above. They helped me a lot in the early days of QO100. If I have forgotten to mention someone, Please let me know.
Some useful Links:
A Radome and LNB Cover for the POTY from DM4DS:
www.thingivers...
www.thingivers...
A Adapter from 22mm to 40mm from M1SJE:
www.thingivers...
A 3D-Printed Dielectric Lens from Hybridpretender:
www.hybridprete...
My Building Guides for the Patchfeed and the Plates itself:
www.oe8hsr.at/b...
www.oe8hsr.at/b...
The original Blogpost from UHF-Satcom's Blog:
uhf-satcom.com...
Thank you for watching this Video, If you have Feedback or Recommendations, let me know.
Website: www.oe8hsr.at
Twitter: @MeltdownCore
@mikewillis1592 4 жыл бұрын
It's called a Vernier scale.Next time, use thinner solder and ideally multicore. You only need a little. Remember it will seep through the gaps.
@hansomdiy6044 4 жыл бұрын
Thanks mike. Ill pin this comment to the top so everyone can read your suggestions. :)
@ra3apw 3 жыл бұрын
Hans, thank you for the video. It help me to assemble this POTY antenna variant for test with several others. Good results are also obtained by using flux and thin solder instead of solder paste. Instead of a gas torch I used HG6531CK Makita Head Gun. 73!
@hansomdiy6044 3 жыл бұрын
Using a heat gun is a great idea. :)
@manfredbinder9183 3 жыл бұрын
Schönes Video ! Beim Löten ist das Rohr zu kalt, weil der Schraubstock zu viel Wärme wegzieht. Dadurch läuft das Lot zu sehr auf die Platte anstelle in den Lötspalt. Entweder das Rohr höher spannen oder was zur Wärmeisolierung unterlegen. Anstelle der Flamme geht auch ein Heißluftgebläse sehr gut.
@hansomdiy6044 3 жыл бұрын
Danke für die tipps. :)
@jameswelsh453 4 жыл бұрын
Another great video thanks Hans
@avdeur 4 жыл бұрын
great video Hans thanks ..would love another video how you connect the LNB to this POTY!!
@hansomdiy6044 4 жыл бұрын
Thats a great idea! Ill do that! :)
@avdeur 4 жыл бұрын
@@hansomdiy6044 you kept your promise Hans (just saw yr instructive video !!) Thanks for that. Wishing you a good Rutsch and all the best for you , your family and friends in the year 2020 ! 73 Albert PA5OXW
@MrCPing 4 жыл бұрын
I love how your caliper looks!
@hansomdiy6044 4 жыл бұрын
it has to see to be accurate. X)
@starsouf2950 3 жыл бұрын
Greet job brother. Genius man.
@alangilman8015 4 жыл бұрын
G4GFD many tnx for a most informative video Hans.
@G0NMY 14 күн бұрын
The best method to remove excess hot solder is with a paint brush. but dont get your gas torch flame near it. hee hee
@iw0hjz 4 жыл бұрын
TNX, well done. My next step POTY
@hansomdiy6044 4 жыл бұрын
Keep us informed of your Progress. =)
@dxscotland5901 4 жыл бұрын
Excellent job Hans!,is that my new antenna 😀
@hansomdiy6044 4 жыл бұрын
Thanks Chris. You are the first one watching the Video! It was uploaded minutes ago. :D
@Terrenojaboticatubas 3 жыл бұрын
Good morning Hansom. How long is the 20mm copper tube?
Harley Quinn with the Joker
Рет қаралды 24 МЛН
RTS: Retro Tech Shed
Рет қаралды 6 М.
Harley Quinn with the Joker
Рет қаралды 24 МЛН