No video
Assembly and Measurements of a Discone Antenna
Рет қаралды 4,139
2 жыл бұрынI bought a “TransCell” Model T601 from Scanner Master Corp. and assembled it, erected it, and made some measurements. If I was to do it again I would have purchased one from AlliExpress and selected an “N” connector rather than a UHF connector. I don’t know if the AlliExpress ones are sold under the “TransCell” name, but they look exactly the same.
@Dazzwidd 8 ай бұрын
I bought something very similar and wasn't happy with it. Skirt radials kept falling out and it didn't go down to 70mhz like they claimed... the dimensions weren't big enough. So I've redesigned it, bought better hardware and am using aluminum sheet to make a bigger top disc as well as solid 6mm aluminum rod to make 8 longer radials. It'll work properly when I'm done with it 😅 Got the design information out of the 1974 ARRL antenna book. Thanks for the video, the analyser gave a lot of interesting information.
@XL290 2 жыл бұрын
This antenna lacks a vertical whip on the top which would allow it to reach down to 25MHz, like the Diamond D3000N which does have one. Based on the cost it looks like a great value.
@napomania Жыл бұрын
My No Brand " original" Discone has a vertical whip. Just for joke i put a longer whip that seems to work better
@benchmarksignsandgifts 6 ай бұрын
No ground?
@sampamnl.8964 11 ай бұрын
ขอบคุณมากครับ
Jason Derulo
Рет қаралды 32 МЛН
Farpoint Farms
Рет қаралды 17 М.
FEPLabs Radio
Рет қаралды 10 М.
KB9VBR Antennas
Рет қаралды 222 М.
Jason Derulo
Рет қаралды 32 МЛН