At last, a better YHM suppressor mount

Рет қаралды 49,356

9 ай бұрын

No collars or ratchets, only threads. The Yankee Hill Machine Co SRX system is a much needed, long overdue, replacement for the Phantom QD family of mounts and muzzle devices. In this video we go over the mount, and the currently available muzzle devices.
Support this channel on SubscribeStar:
www.subscribestar.com/hoplopf...
Sponsor, affiliate, and social media links:
linktr.ee/hoplopfheil

Пікірлер: 292

@toddinfl 9 ай бұрын

People in R&D watching Hop take a Dremel tool to a muzzle brake then talking to each other about what they should have for lunch.

@f308gtb1977 9 ай бұрын

I have no YHM cans and no intention to buy one, but I love me an informative, no-nonsense Hop video. Thanks Hop!

@eamonnkernahan4183 9 ай бұрын

I can't legally own a suppressor where I live, and I still watch his suppressor videos lol

@Token_Black_Guy 9 ай бұрын

Funny thing is yhm is hq'ed in a state where normi3s can't own cans

@jonathanwick1265 9 ай бұрын

@@Token_Black_Guy So is Surefire. They're in CA.

@BabyMachine 9 ай бұрын

Just like Aeroprecision in Washington, after their "assault weapons" ban. LOL @@Token_Black_Guy

@gtrscort1 4 ай бұрын

Nothing wrong with YHM cans. They’re solid, affordable, and get the job done.

@GBGuns 9 ай бұрын

If only this had come out before I had spent hundreds of dollars and hours finding muzzle devices for the old system for my favorite rifles. Oh, and TIMING them...

@lucasblanchard47 9 ай бұрын

Watching Hop demonstrate his elite gunsmithing skills rustled my jimmies in all the right ways.

@fattigla 9 ай бұрын

In my opinion, making a silencer with HUB compatability kindof already assumes people are going to use aftermarket mounts. I think you are spot on with the idea of yhm offering a silencer with no mount, or maybe just a direct thread adapter appropriate for the caliber.

@deltamike3418 9 ай бұрын

If I recall correctly, Capital Armory gives the option to order without a muzzle device and mount for a discount.

@willflint8443 9 ай бұрын

If yhm offered their suppressors with a direct thread adapter, I'd take that option for sure. At least it's something I'd potentially want later. For what it's worth I have a resonator k with atlas and a2 style flash hiders, pretty sweet so far.

@blairbrennan9553 8 ай бұрын

@@willflint8443The R9 is shipped with a 1/2" x 28 direct thread adapter. I just got mine out of jail yesterday and my SRX devices should be here this weekend!

@compted10 3 ай бұрын

I wish sRx was plan B compatible.

@marcusborderlands6177 3 ай бұрын

Ecco machine sells all his cans without a mount, its pretty nice

@mr.horseshoe2301 9 ай бұрын

Very happy with the SRX system and YHM products in general. Great value for what you get.

@jonathansmith7306 9 ай бұрын

Finally, a video that applies to me. I wasn't aware that the QD mount wiggle was considered to be bad.

@gtrscort1 4 ай бұрын

You only get that wiggle if you install it improperly.

@Pantone268Plus 3 ай бұрын

It doesn't wiggle if you put it on correctly. Backing the can off is not installing it, you rotate the collar to grab the next tooth. There should be no movement.

@gtrscort1 3 ай бұрын

@@Pantone268Plus Per YHM, you don’t even need to rotate the collar and it’ll still be locked in place.

@billstevens5277 7 ай бұрын

Hop! YHM was watching your channel. The new Fat Cat comes with the SRX mount and a short 1/2x28 muzzle brake.

@chadwik4000 9 ай бұрын

I've been fawning over the stuff Griffin Armament has been doing lately, especially in regards to suppressor mounts.

@rustyshackelford6372 9 ай бұрын

as a rearden fanboy im eagerly awaiting your review of their systems. this was an excellant video, thanks as always and keep up the amazing work!

@Roland_Deschain_ 9 ай бұрын

Totally bizarre that they don't have 1/2 x 28 short flash hider. I actually quite like the older Kurz flash + Phantom QD setup, however not the best for sure.

@chadjones7722 9 ай бұрын

they do, the info from hop on that part is about as complete as the personality. I own at least a half dozen just in 1/2x28 because I was an early yhm adopter. SKU: YHM-4315-28a for 1/2x28 (5.56, 22 cal. etc) and YHM-4315-24A for 5/8x24 (30 cal, 308 etc.) Yes the new ones are shorter overall because of the over mount attachment, but they do indeed have an old style short flash hider for 30 cal and 22 cal. Also, fyi, YHM's compatibility guide claims certain long 1/2x28 mounts will not work with their turbo k with kurz adapter, and I've found that not to be the case, it's worked with all the 43 series I've tried, mind you I only bought the long flash hiders and long breaks (its a maximum length callout and the shorts all work), not the cringy spiked end flashider that works with the can.

@Roland_Deschain_ 9 ай бұрын

@@chadjones7722 Yes, I have two of these. I was talking about the new system.

@kilroy5166 9 ай бұрын

@@chadjones7722 "is about as complete as the personality" What?

@trooper6762 9 ай бұрын

Dang Hop, this video almost makes me want to buy a YHM suppressor... But paying the feds that much money is really hard for me to want to do. Good job YHM, and thanks as always Hop.

@randomidiot8142 9 ай бұрын

I'm waiting for a company to come out with a 'revolutionary standardized taper thread mount' that looks suspiciously like NPT threads.

@cadik3018 9 ай бұрын

Picked up a SRX mount and full size FH when my Turbo K got out of jail about two months ago, loving it so far, a bit shy of 1k down the pipe on them. Yhm cans would be an unbeatable value if YHM dropped the phantoms and shipped cans with the SRX system. And yes, the long FH fits with the Turbo K

@EdwardOrnelas 9 ай бұрын

So basically a Plan B/cherry bomb mount. Even though it didn't work well, I was digging the ratcheting system. Quick detach system is cool

@Glandash 9 ай бұрын

QD is a lie. When a can is hot, you’re not QDing it. It’s most useful for quick attachment when you arrive at the range. Ditch the QD systems and get a taper mount, it makes life much nicer.

@chadwik4000 9 ай бұрын

@@Glandash they got those suppressor oven-mitt wrap things...

@chadwik4000 9 ай бұрын

Griffin Armament has the best looking mounting systems, in my opinion.

@EdwardOrnelas 9 ай бұрын

@@Glandash It makes sense, I have a taper mount on my "main" rifle. But I recently picked up YHM for another build. I dig the ratcheting mechanism.

@benbreakfast4314 9 ай бұрын

In my opinion Rearden fixed this years ago and I look forward to the day when everything is cheaper and comes as hub only with no adapter, like every rifle that now comes with no sights.

@highdesertdrew1844 9 ай бұрын

5/8-32 and 11/16x24 are for some 9mm and .45ACP PCC muzzle threads. TBH, you're kinda selling me on YHM cans.

@Hoplopfheil 9 ай бұрын

I don't know if I want to sell you on them. But I do really want a turbo k RB

@DD-hz3ts 9 ай бұрын

I think the problem is that by the time you've found an insert that is right for you, you've easily spent an extra $140-280 plus mounts plus any "try out bin" inserts/mounts, and could have just bought a different can that comes with your actual desired interface to begin with

@highdesertdrew1844 9 ай бұрын

@@DD-hz3ts As an occasional gun sperg, and owner of a business that has a tool room that includes a lathe and a mill, I looked specifically at mounts that would be easy to machine, and any with a standard thread and a taper are pretty easy to cut, by hand on a manual lathe in an hour or so. 10+ years ago I designed some threaded taper type mounts, the biggest headache I made for myself was using acme type threads. That said, the threads and then taper type are easier to make than the taper than thread type, the difference is marginal, but still present, especially when you're a lazy machinist.

@shockwave6213 9 ай бұрын

The odd ones you saw are most likely AK muzzle threads. 14x1 L is the AKM standard so most 7.62x39 AKs will have that. The AK 100 series, AK-74 and AKS-74U pattern will be 24x1.5 . Romanian AKs use a 22x1.5 thread pitch. The older Yugoslavian PAP pattern thread pitch is 26mm

@Brimwald 9 ай бұрын

Helpful comment, thanks!

@distalradius8146 4 ай бұрын

He is referring to 11/16x24 (it's highlighted in the video at 5:10) which IIRC is a thread pattern found on .458 rifles.

@geodkyt 9 ай бұрын

If they had the short flash hider and brake in ½-28, I'd swap out all my current muzzle devices this fall/winter. I especially like the fact that there is less stuff on the muzzle device, reducing weight where it matters most (especially since I'm *not* running cans on everything all the time - I just like to have the option.

@chadjones7722 9 ай бұрын

@geodkyt 9 ай бұрын

@@chadjones7722 These are *exactly* the mounts he is *not* talking about. He's talking about the short sRx flash hider or muzzle brake not being available in ½-28. *You're* talking about the older Phantom mounts that I've already got and would prefer to replace with sRx if they had the shorties in ½-28. *We know* they have those thread patterns in the older Phantom mounts (that are inferior to the sRx system).

@ragedashboard6374 9 ай бұрын

I've been running Griffin taper mount for years. Same thing, but a much greater selection

@acemace3618 9 ай бұрын

Their dual lok is even better since it adds an active lock in addition to the taper, which is in front of the threads as opposed to behind. Their muzzle device options are pretty comprehensive as well

@ragedashboard6374 9 ай бұрын

@@acemace3618they kinda stole it from dead air but since dead air quality is in the shitter, Griffin seems pretty meta now

@chadwik4000 9 ай бұрын

@@ragedashboard6374 I'm crushing on their barrels too.

@fullm3taljacket 9 ай бұрын

Very much looking forward to the Rearden vid. Had no idea about the SRX until this dropped.

@Nomad-Davis 9 ай бұрын

Just had my t2 clear ATF jail and have been looking for a video on this exact thing forever. Thank you and i will be getting the SRX adaptors and devices as soon as funds allow it.

@rustyshackelford6372 9 ай бұрын

save your money and go rearden

@ellisoncheng2174 9 ай бұрын

Live in a state where we can’t have a suppressor but watched your video anyway because I appreciate your content

@chadwik4000 9 ай бұрын

What a rebel

@kingterry6045 9 ай бұрын

my wife's boyfriend said I couldn't have one either.

@cercaz 9 ай бұрын

THANK YOU! I want a short FH in 1/2x28

@tristenwilliams1943 7 ай бұрын

Quick pointer for the phantom qd mounts: if you screw your can all the way down on the collar (until it can’t possibly go any further), the collar will pop down a hair as the tooth is contacting a tooth on the ratchet. Rotate the collar counterclockwise and it’ll pop into place, completely securing the can with zero wobble or rotation. I figured this out by accident and it works perfectly.

@Hoplopfheil 7 ай бұрын

I talked about that when discussing these previously, and I think FT covered it as well. That's how they're supposed to work but the tolerances aren't good enough so it only works on some combos of mount and muzzle device.

@joker747A 9 ай бұрын

I have been know to dremel the shit outta some gear… followed by sanding and finished up with rattle can artwork 😎👍🏼

@stephanarizona9094 9 ай бұрын

All my weapons run dedicated suppressors so I prefer direct mounts because they are never removed.

@lukesites2457 9 ай бұрын

That's what I was planning on doing lol. I need one can for one rifle, figured I'd just direct thread it and skip the headache😂

@LosDoyerss Ай бұрын

Wasted money

@nathan_k 9 ай бұрын

7:54 - "If you have any questions, please let me know in the comments below:" Q: Who does your hair (8:01)? It's absolutely fabulous. That's like 1980s VO-5 ad level shiny.

@Hoplopfheil 9 ай бұрын

That's my all-time favorite hair product: sweat.

@Tarburz 9 ай бұрын

Sweat and scalp-grease 👏

@toddinfl 9 ай бұрын

Hop is related to Clint Eastwood

@coopandcarter 9 ай бұрын

You reply about your fucking hair? Good grief.

@czgunner 9 ай бұрын

Good info. I have zero issues with the older style mounts.

@bamzilla. 9 ай бұрын

I run SRX and I agree with everything you mentioned. And I can attest to the long device fitment considerations.

@PrebleStreetRecords 9 ай бұрын

Hop, you gotta find a buddy with a lathe. I love being able to adapt muzzle devices to any bore and thread pitch I want.

@randomidiot8142 9 ай бұрын

I've been able to bore out a few muzzle devices but I'd be annoyed if my buddy asked me to bore out and internally thread something that was nitrided or hardened.

@Mrgunsngear 9 ай бұрын

🇺🇸

@oskar6661 9 ай бұрын

As a guy who only has buddies with suppressors, I am constantly baffled (joke intended) that there is still no simple, industry-wide standard that has become the norm. Similar to say, MLOK for most handguards, etc. Crazy that no one has teamed up to simply make a solid, reliable, simple, intuitive system that is shared by more than 2-3 companies.

@argonzificationd.1531 9 ай бұрын

The industry doesn't have much of an incentive to develop a standard, considering most companies would rather just lock you into their ecosystem. Historically, most industry-wide standards, including MLOK, have resulted from military adoption. Unfortunately, the military hasn't used suppressors in large enough quantities to attempt standardizing on a mount for them, but that may be changing. However, if it does change, it will almost certainly be to whatever system the XM7 suppressors use, which would mean that the SRX will have a huge uphill battle to fight.

@billangell6478 9 ай бұрын

I think the HUB thread is the closest we’re going to get with that. Consumers have different wants/needs or are already invested to a particular ecosystem. Being able to slap a direct thread mount on and leave it up to the end user kinda makes sense to me. Personally I wouldn’t buy a can that isn’t ready for/can’t be swapped to the q/rearden mounts. The last thing I want to do is get stuck paying for another mounting system vs a cheaper DT setup since I’m just going to swap it anyways.

@bfish9700 9 ай бұрын

@@billangell6478it also kinda sucks that the surefire ones aren't hub compatible. I'd love a surefire mount but I dunno if a warcomp would fit inside a yhm can.

@jb76489 9 ай бұрын

@@argonzificationd.1531another issue is that so long as there is such a large barrier to entry to owning a suppressor, there’s even less of an incentive to standardize

@SCFIII 9 ай бұрын

@@bfish9700 Ecco machine makes hub compatible surefire SOCOM mounts out of wardens and trainers. I have one on an old AAC can that gets a lot of use.

@darkstarninja5978 9 ай бұрын

I ended up buying the titanium kurz adaptor for my turbo t3 and its been working fine with the included brake.

@jasonparent7967 9 ай бұрын

We need to start a gofundme to buy Hop a proper chopsaw

@hateferlife 9 ай бұрын

I agree that YHM should offer other in-house devices as an option, at a minimum. The direct adapter should be the base option, like you said "for liability purposes". Knocking just $50 off would open the door to more people. IIRC they used to offer direct thread only packages, maybe only in the R9...? OG Turbo?

@Mase326 9 ай бұрын

Love my old YHM QD mounts. Newer ones have only gotten better. Would love to try some of these new sRx mounts, especially since the newer cans seem to be back compatible with old QD ratchet mounts as well as sRx.

@sahzookey 9 ай бұрын

I switched to the SRX system for my Resonator R2, I like it much more now. I sold my old adapter and muzzle devices for more than the new system was to replace it, so I even made money. I can't complain, especially because of hiw annoying that ratcheting was.

@rookiboi26 4 ай бұрын

How’d you sell it planning on selling mine too??

@ionicmax 9 ай бұрын

Id like to see that rearden atlas review. Very much considering switching out of keymo for it

@loganlamons5373 9 ай бұрын

Did I see you shooing an AR in 7.62x39? Would love to see a video on that build!

@alexanderm8880 9 ай бұрын

Hopefully you like the Rearden option. I'm not a fan of shims either but I love the simplicity and Rearden's been solid as a company in my experience.

@josiahhughes5204 7 ай бұрын

This was very helpful

@bigslice4738 9 ай бұрын

I got the Rearden R2S and it’s an A1 style so no timing as well my barrel has a “thread relief” on them so no washers or shims needed. I think the R2S is new and comes in a few designs

@jacksonnra1856 8 ай бұрын

With these videos I'm learning that guns are for people who like to shoot.

@jaredmatthews9403 9 ай бұрын

Thanks for the info

@waffle_chuter 9 ай бұрын

I was looking at the Yhm turbo t3 and going with the rearden atlas mounts to shorten it up a bit for my 11.5, but this has me reconsidering and thinking about going with this sRx system 🤔

@Barnes-ml9wg 9 ай бұрын

What about the Otter Creek polonium K?

@waffle_chuter 9 ай бұрын

@@Barnes-ml9wg I haven’t heard a whole lot about them, but what I have heard was good. I’d like a k can to keep the whole set up as compact as possible, but I just know that short cans on short guns can still have a lot of muzzle flash/signiture

@prototype3a 9 ай бұрын

I wish Rearden had all the muzzle device lengths/types/threads/etc as Griffin taper. I also wish Rearden's website wasn't terrible.

@LarsBars17 9 ай бұрын

Thanks Hop.

@srobertson4035 9 ай бұрын

good review!

@CharlieMikeNS 9 ай бұрын

gotta love the kerrzzzz system

@16apec 9 ай бұрын

I love my rearden system. I'm curious to see what you think of it.

@markmasztal2253 Ай бұрын

YHM thanks you.

@luckywyatt 7 ай бұрын

YHM cans are my favorite! I am totally a fan of the phantom QD mounts. (I haven’t tried the SXR yet,, as over a dozen of my rifles wear primarily the Kurz Flashhidder or mini mz break) Ive been shooting with: -Resonator gen 1 & gen 2 -R9 set up with titanium kurz adapter -Wraith 9mm with QD mount -Old DT 5.56 phantom I’m a FFL/sot with the luxury of being able to tryout many suppressors. Plus seeing & hearing first hand all the customers grievances with other brands and mounting systems. Personally I gave up on All silencer co products (everything fell apart in the 1st year with 6+ rifle and pistol cans) I had better luck with my old cheap Huntertown arm’s products. Also I see lots of frustrations with Dead air Keymo users and SureFire socom guys. I just humbly share my experience of the awsom YHM stuff that’s $$hundreds less. Never had to use their warranty ,,ever! Go YHM

@mikeheadless 8 ай бұрын

The new Fat Cat ships with the SRX system.

@JustAnotherHouseCat 9 ай бұрын

Ive been debating different QD and muzzle brake systems for when I eventually get my Lahar suppressor this is good to know

@Glandash 9 ай бұрын

I used to have a KeyMo on my Nomad-30. Now I have a Plan B and a Cherry Bomb. In the future my 5.56 can will be whatever Q’s cherry bomb compatible 5.56 can is, because I realize now that ratcheting systems and “QD” systems are just selling you extra weight. If I wasn’t a poor, I’d just direct thread, but I still don’t want to buy a dedicated can for each rifle.

@chadwik4000 9 ай бұрын

Check out the options Griffin Armament has.

@ajsomp 9 ай бұрын

I enjoy YHM in general. Are they the best? No. Are they using the newest tech? No. But they have always had cheap suppressors that plain work. If NFA BS wasn’t a thing, I feel like having a few YHM cans for all the “extra” guns that maybe you don’t shoot as much or don’t care if your buddies mag dump out of. Not everyone needs to spend 1700 on an RC3. Glad to see they are listening (unlike say dead air) and I hope they start picking up on some of the low back pressure and 3d printed cans.

@urbanbasementoperator 9 ай бұрын

Ah, the venerable MT4 Morse taper, now available for your suppressor. Used by machinists the world over for the last 100 years.

@sgtslippyfist6345 20 күн бұрын

I swapped the mount with a asr silencer co on my yankee hill R2

@Tofu1998 9 ай бұрын

I use an Area419 mounting system to achieve similar results. Add a few drops of pipe sealant to make the suppressor last a few hundred rounds without working itself loose.

@fishdude333 9 ай бұрын

ewwwww. Taper gang for life.

@hardymon 9 ай бұрын

I'll second 419, great flexibility and utility!

@FlowBaka 9 ай бұрын

You need to hurry with the Rearden mfg review. I’m about to switch all my yhm qd over.

@operatorsanonymous1741 9 ай бұрын

The long muzzle device works with the kurz adapter

@jrozz421 9 ай бұрын

I thought only the brake, not the flash hider

@ZeeeBruuuh 9 ай бұрын

Rearden is the way. Switched from Keymo and happy with it.

@wbryan03 9 ай бұрын

If you order you can from Capitol Armory you save some money ($60 with my Turbo) by letting them keep the mount and or muzzle device. That why you not spending more money for the system you want on a budget friendly can.

@milesrost6674 7 ай бұрын

Late to the party... John "FocusTripp" and yourself are similar in your ways. "Stay Strong, Chase Excellence Brothers." - Godspeed

@MiseryDuke69 9 ай бұрын

Hop can you ever do a video explaining why Direct thread is better? Im looking at getting into suppressors in the near future and dont know anything about them but i [swear I] remember you saying that was the case but dont remember you going into detail about why Then again i could be wrong and you never said that

@EvilWiffles 9 ай бұрын

Direct thread is great for bolt actions. I don't know if things would change for semi's. I think it just depends on how good your barrel is threaded because some of them are terrible and don't stay tight. I use direct thread on the Ruger American 300blk with my Nomad-L and it's very solid. I sometimes have to use the adapter tool to loosen it off. But I'd imagine with semi-auto's, more constant movement would eventually loosen it overtime. I haven't bothered with Rearden or this mount yet but they seem pretty much identical to how EZ-Lok works for handguns. Once heat cycled, it'll be a bitch to remove. I had issues with that before and I'd always put a few rounds down range and then try and loosen and re-tighten the can, seems to help quite a bit. I wouldn't want this mounting style on a 5.56 gun because the cans get incredibly hot and take awhile to cooldown.

@randomidiot8142 9 ай бұрын

@@EvilWifflesdirect thread works on whatever you want it to. Direct thread 'takes longer' to detach and reattach. Direct thread needs no mounts, don't need to be timed, and the thread fits have a clear and objective standard beyond the bounds of the suppressor industry. Crap threads on a semi auto under a mount are the same as crap threads on a bolt gun holding the can directly. They're crap regardless.

@ElsinoreRacer 9 ай бұрын

SO....... my 1st & only suppressor got out of jail Tuesday of this week. I have three YHM muzzle devices all mounted up and a Kurz and their standard QD HUB mounts. Then this video comes out.

@docternoblex 9 ай бұрын

This may be because I don’t spare any expense with my suppressors, but I find that TBAC makes a really good suppressor

@sonickiller360 9 ай бұрын

I've been working on spur gears for so long, everything looks like a spur gear now.

@ThomasHendrickson 9 ай бұрын

Can you please do a video on that 7.62x39 AR?

@Thisisoscar_ 9 ай бұрын

ive tried both the Kurz and standard yhm mount on my Turbo T2, the initial expansion/blast chamber needs a lot of space/volume to cool and slow the expanding gasses down before even hitting the first baffle. Every suppressor design allows for a large expansion/blast chamber. Using the Kurz mount sacrifices some of that efficiency. Is it a huge deal? nah

@SMACK1978 9 ай бұрын

Suppressor game is a masochists paradise. I would have loved this system years ago with my YHMs on SBRs but now I’ve committed to huxwrx and their fucking shit 😩

@tatt2dpeckerwood608 6 ай бұрын

I bought my YHM turbo K from capitol armory and they offer you a discount to remove the mount and muzzle device .. I chose that option and use the rearden atlas

@ethan5.56 3 ай бұрын

I’m trying to figure out which QD system to go with my AB suppressor Warthog 5.56. There’s a bunch of options out there for sure

@loganshotrod4x464 9 ай бұрын

Videos like this are a reminder of how bad it sucks to be in California.

@ZeusHands 9 ай бұрын

Man does anybody else think Hop looks like a young Stephen King? I can’t un-see it and im now expecting a watch party of Maximum Overdrive 🧐

@alexisdetocqueville9964 9 ай бұрын

I don't mind the phantom system BUT only the Kurz devices and mount. The standard mount is absurdly large and clunky.

@InfinitumDiver 9 ай бұрын

I recently saw a can that could attach to an A2 birdcage. I'm not sure how good it is, but I do love my A2 birdcage. Any thoughts on that system?

@randomidiot8142 9 ай бұрын

Gemtech? The socket the suppressor needs to properly align on the a2 robs internal suppressor volume. The a2 is mounted with crush washers and isn't made to be a mount so concentricity will likely be an issue.

@halliwedge 5 ай бұрын

I will never own a firearm, but thanks for the information.

@GigaChode 3 ай бұрын

I’m gonna get the ymh k RB for my first can. You gotta start somewhere lol

@billstevens5277 9 ай бұрын

I like to screw on the can and just leave it. How many rounds have you shot in between checks for tightness? Do you think they will stay on forever without loosening or having alignment problems?

@socialmarauder 9 ай бұрын

I’m looking forward to the Rearden vid! (Pls validate my choice in muzzle device ecosystem 😵)

@TheBradyrulez 9 ай бұрын

Any thoughts on looking into the Cam and EZ lok systems for suppressor QD on pistols?

@EvilWiffles 9 ай бұрын

He said that he hates suppressing handguns. So I'd imagine he wouldn't.

@jimyeats 9 ай бұрын

I feel like some of my Dead Air Keymo suppressors have the occasional muzzle device that they don't seem to lock up as well with, or it almost feels like the ratchet mechanism/retention mechanism isn't quite as secure, or needs a little extra twisting force. But overall it seems like a secure system, just wish it wasn't as heavy.

@HotboiEngineering 8 ай бұрын

Lmao they basically made a big ass AN/ JIC fitting and said wow this works pretty darn well as a supressor mount.

@garrettmandrell9722 9 ай бұрын

I’m in the minority that likes the Phantom QD system. I think for what you get it’s a great system. I think many people just don’t like the look of the MD. With the SRX my 0.0002 cents is they should have done LH thread like the Xeno or OSS. Big miss there. I also think 90% of people who have concerns about the mount affecting accuracy can’t shoot their rifle well enough to notice. Is it perfect? Absolutely not. Is it much better than a lot out there? Yes. I’d take Phantom QD over everything except Surefire probably. Go ahead, roast me.

@hateferlife 9 ай бұрын

The Phantom mounts are ok. The 'muh size and weight' guys will probably be by shortly tho.

@garrettmandrell9722 9 ай бұрын

@@hateferlife tough to beat for price and usability. If the racheting mechanism was on the suppressor instead of the MD people would go crazy. It could use a little updating but it is solid.

@cousinzeke4888 8 ай бұрын

I'm thinking about getting an R9 for my CZ Scorpion, would this system have any real benefits over just going el cheapo direct thread? The can is going to live on that gun so I don't care about quick detach.

@jacobmoros28 8 ай бұрын

Hey hop, I was hoping you would take a video request. As an avid shooter and photographer, I recently saw that the famous Leica brand also makes rifle optics. I hadn’t seen anyone else cover them, and it’s such a niche idea that I thought it would be a good suggestion for you to make a video on.

@pehenry 9 ай бұрын

0:25 - Wow. That view.

@dylanjackson6685 9 ай бұрын

Facts

@takumif7056 4 ай бұрын

How’s the POI shift if any? Is it better than the Phantom QD? Think you could maybe do a video on the flash hiders shooting at night to see how they perform? Thanks Hop!

@tinncan 9 ай бұрын

I've wondered if you could just take off the phantom collar and rely on the taper and threads only... A few of my phantom mounts split teeth which really sucks for accuracy.

@tinncan 9 ай бұрын

Also boo having a first gen resonator with no HUB...

@88dugjt 9 ай бұрын

5/8-32 is bca 45cal at upper threading.

@homerj109 9 ай бұрын

Do you have any experience or knowledge of Griffin's taper mounts compared to these?

@RandyTheB_ 9 ай бұрын

Griffin's Plan A taper system is inferior. The angled taper is behind the threads, near the base of the muzzle device. This theoretically makes it more repeatable (if you keep the muzzle device clean constantly), but very prone to carbon locking.

@elzippo488 2 ай бұрын

Hop beautiful backdrop you have there bud. What part of the Country?

@BeniBen 9 ай бұрын

new to the suppressor world I have the T3 in jail at the moment and it comes with the phantom mount and the 3 chamber muzzle brake. Do you think I should ditch those and go with the SRX system instead ?

@Hoplopfheil 8 ай бұрын

You can probably use it as is for a while, and see how you like it. But before you buy any addtl phantom muzzle devices, strongly consider swapping to SRX.

@danclas5983 6 ай бұрын

I'm in the same boat as you with a T3. Got a new 14.5 pw build and went with the SRX MD right out of the gate. Hope it was the right choice.