See now those are the cables that came to mind when i first saw someone setup a PC to this thing and the wires stuck out half a foot lol. Great idea! Looks so much cleaner!
@Upscaled_HT2 жыл бұрын
Thank you!
@zlanders772 жыл бұрын
Great video man. I have my legends pinball and I’m building second pc to dedicate. Little overwhelmed about getting this stuff set up to be honest.
@Upscaled_HT2 жыл бұрын
The pinball emporium videos are pretty good. I watched them several times and managed to figure it out. It's doable.
@EQOAnostalgia2 жыл бұрын
Same
@Beepbeepoutoftheway2 жыл бұрын
this is awesome, very well done video
@Upscaled_HT2 жыл бұрын
Thank you!
@pearsth Жыл бұрын
Nice overall setup. Thanks for sharing. Watching some of the game play, I can see that you need more horespower and this will be a lot more fun for you. Things go in this order in terms of least to most horsepower needed in my experience - FX3, Future Pinball, then Visual Pinball (VPX). I had originally figured to only use the first two, but then the community making these seems moslty focused on VPX and the "best" games all seem to be on there. LIke you, I started out with a spare parts/used parts build. A gen 2 Core i7 (yours is better) and a GTX 980. All in all, though, it was just not that great of an experience for VPX tables. My "main" PC is a Core i5-4690 and a GTX 1080. Everything runs smooth on that, so I am upgrading my Pinball PC to match at least that. Just some food for thought as I watched your videos and saw how laggy some of the screens were. I think $150 for a used GTX 1080 would make a big difference in your setup and you would like it a lot more.
@Upscaled_HT Жыл бұрын
I’m have a gtx 1660 I’m going to try but I haven’t gotten around to it since working on it is a pain since inside the cabinet. Thanks for the tip.
@pearsth Жыл бұрын
@@Upscaled_HT Hah...I was debating moving my stuff inside the cabinet as I like the clean setup....based upon that comment, I will keep mine outside for now. ;)
@johnnycochran61283 жыл бұрын
Waiting for my APL to arrive. Pretty pumped. It included the Zaccaria packs but I want to learn how to put all the other stuff on there
@Upscaled_HT3 жыл бұрын
It's a pretty good project to take on.
@johnnycochran61283 жыл бұрын
@@Upscaled_HT Really excited for it. Ordered 4 days ago but status still says unfulfilled 🤨
@jasoncdublin Жыл бұрын
Really like the setup you did here! Can you point us in the direction for the auto-start script you have for your PC? That is a super nice feature that you didn't really say much about in the video...any help is greatly appreciated.
@Upscaled_HT Жыл бұрын
It’s included in the pinball emporium package.
@jasoncdublin Жыл бұрын
@@Upscaled_HT wow that is a nice touch! I was on the fence between PUP and PE but your video is pushing me towards the latter! Thanks for the response!
@joeyjojojunior4886 Жыл бұрын
When you installed PinballEmporium are all the tables included or do you have to install the separately?
@Upscaled_HT Жыл бұрын
It comes with all the games. It’s over 300 I believe.
@gfunkkowboy2 жыл бұрын
Incredible
@Upscaled_HT2 жыл бұрын
It was a pretty cool project. Glad I did it.
@funtyes19703 жыл бұрын
what i would do if your computer is inside your pinball machine i would take that OTG button thing take it apart and put it inside your pinball machine so you don't see them wires and take some black vinyl wrap to cover the hole on that back plate where OTG and HDMI,USB ports was . there is a video how to do this
@Upscaled_HT3 жыл бұрын
I think I saw that video. I might do it one day but I wanted to keep it simple for me for now.
@wanab10822 жыл бұрын
Nice job !
@Jordan__Sloan2 жыл бұрын
I really want one of these, but they keep getting bad reviews, is there a time stamp where you explain how much you spent on upgrades?
@Upscaled_HT2 жыл бұрын
Most of my upgrades were parts I had laying around. If you’re just looking to get a pinball fix, keeping it stock does that very well.
@Roadsurfer2k113 жыл бұрын
Get a set of hole drill bits for clean holes in wood.. a set is $15 at harbor freight or amazon. Also are the speakers/amp only activated on pc otg play? And the stock tables still only play off original speakers? What was the hdmi splitter used for? I have one of those exact ones
@Upscaled_HT3 жыл бұрын
Thanks for the tip on the drill bits. The extra speakers and amp are only for pc otg play. The stock tables play on the original speakers. The hdmi splitter is so I can run the hdmi signal out of the video card to both the table and the hdmi to optical/headphone jack converter. This allows me to use the amp and speakers simultaneously with the table speakers with no sound delay. So the table speakers handle the highs and mids from the sound and the extra speakers bring in a lot more low end.
@religionisapoison2413 Жыл бұрын
6:22 is that fiberglass surrounding the button?? Kinda odd material choice
@religionisapoison2413 Жыл бұрын
I'm looking for some specific tables like KISS, Canadian hockey table... Would I find those on places like arcade punks pinball dumps or where's a good community
@religionisapoison2413 Жыл бұрын
Could probably add haptic feedback with some small motors w offset axle... Not sure how lightweight the cabinet is
@Upscaled_HT Жыл бұрын
It’s just a vinyl wrap I bought on Amazon to hide the horrible job I did with drilling the hole for the button.
@religionisapoison2413 Жыл бұрын
@@Upscaled_HT oh cool! I couldn't tell. It looked textured. Thanks!
@nickgerula2 жыл бұрын
Can you turn off the special effects on the FX3 tables ( like the points ascending when you get them from the target?)
@Upscaled_HT2 жыл бұрын
Sorry for the delay. You can shut off the points popping up in the UI settings.
@williamsiegel7277 Жыл бұрын
where do you get the games?
@Upscaled_HT Жыл бұрын
I have some links for pinball emporium in the description.
@wilso2aj2 жыл бұрын
How much $ did you put into the PC/accessory part?
@Upscaled_HT2 жыл бұрын
Not much because I already had all the parts. If it had to be built new, the expensive part is GPU. A 3050 or even a 1660 super would probably be good options.
@timothyriegle19842 жыл бұрын
Do you have any flipper lag?
@Upscaled_HT2 жыл бұрын
Not with the at games games. With some pinball emporium games, I have.
@Kilroy_51502 жыл бұрын
Stupidest idea in the WORLD (and any pro will tell you i'm right): Putting the HDMI on the "TOP" of the table when it belongs in the back or bottom where it can't be damaged by pets or kids. I ordered the VIBS and they sent it to me with a bad ribbon cable. It was like PULLING TEETH to get these guys to send a replacement and, when they finally sent it, it was for a newer model. The Legends Ultimate guys are a bunch of a-holes and i even had one of their guys (on the phone) grudgingly admitting it. LOL.
@Kilroy_51502 жыл бұрын
It's almost like they "designed" this machine to break so they could sell you more parts..... :(
@pcnut458402 жыл бұрын
I am considering installing a Mini Pc Beelink type. Anyone have suggestions on what Os to use and Cpu tyle? i plan on a ssd drive. 512 and 16gb ram. Should i get a beelink with dual hdmi out . I dont plan on adding a dmd. Just want to import my Virtual pinball tables. I miss quite a few games. Like Tommy Pinball wizard. And Popeye by williams.
@jonarsenal2 жыл бұрын
Does the haptic feedback work on pinball emporium
@Upscaled_HT2 жыл бұрын
It doesn’t but my speaker mod helps by adding some impact.
@wanab10822 жыл бұрын
@@Upscaled_HT hi . I saw in another video if you turn up the haptic to high in the ALP then it will work for the pc as well. Hope this helps
@rohanfrancis74533 жыл бұрын
Hi, my pinball emporium menu is showing vertical, can you help please.
@Upscaled_HT3 жыл бұрын
Do you have all your monitors set up in landscape mode in windows?
@rohanfrancis74533 жыл бұрын
@@Upscaled_HT yes i do,
@Upscaled_HT3 жыл бұрын
Can you send a picture of what you're seeing to upscaled.contact@gmail.com? I'm having a hard time picturing what you're seeing. This discord may have all the answers you need too (Virtual Pinball Club). discord.gg/5GwEaBTB
@rohanfrancis74533 жыл бұрын
@@Upscaled_HT Hello, I just sent it to you. Thanks for taking the time to look at it.
@Upscaled_HT3 жыл бұрын
It looks like the games are playing correctly. This is really weird. Did you try reinstalling and going through the set up process again? Did you follow the videos posted by Nate Mac? It took a lot of tinkering to get it just right for me. I messed up a few installations before I got it right.
@petermacnab18713 жыл бұрын
Is that future pinball ? VPX ?
@Upscaled_HT3 жыл бұрын
Pinball emporium has both of those.
@petermacnab18713 жыл бұрын
@@Upscaled_HT domyiu have a link ? They have a plug and play solution ?
@Upscaled_HT3 жыл бұрын
@@petermacnab1871 I have some links in the description of my video for information on Pinball emporium. Unfortunately, it is not a plug and play solution. You need a pc and the installation is a little tedious.
@funtyes19703 жыл бұрын
i have a ROG MARS 760 with dual 760 GPU chip and i feel like it under power i want to get a 1660. like Future Pinball and Visual Pinball most tables work fine where i have the problem is with PinUP videos . i didn't think a 970 would be enough power to run PinUP videos. and you should add a 3rd monitor on top your backglass that what i did but my video cant handle 3 monitors in games play that why i need a new video card like a 1660 or 1070
@Upscaled_HT3 жыл бұрын
Even the 970 struggles with a handful of games. I haven’t tested every game. Even the slower ones are still pretty playable.
@funtyes19703 жыл бұрын
@@Upscaled_HT why i was asking cuz i need a new video card if i could get way with buying a 970 instead a 1660 it will save me a lot of money or even a 1070 . what i seen so far 970 video cards are like $200-$300 used .but a new 1660 are like $400-$500
@Upscaled_HT3 жыл бұрын
@@funtyes1970 970 isn’t perfect but it does a good job. Probably not worth spending double on a 1660.
@Upscaled_HT3 жыл бұрын
I should mention that some of the back glass videos don’t play smoothly but most are fine.
@funtyes19703 жыл бұрын
@@Upscaled_HT yeah my ASUS ROG MARS 760 video card don't handle 3 display monitor to good . it can play Future pinball tables with 3 monitors but not so good with Visual Pinball tables and PinUp player tables. plus this video card is like 7 years old . when i buy this card it was one of top video cards out there i think i paid like $600 for this cards . i guess it time for a new gaming PC and thanks for everything
@ien20232 жыл бұрын
Yikes!! I just have a gaming desktop underneath. This way it's not clutter, doesnt over heat, and replaceable.
@Upscaled_HT2 жыл бұрын
That’s definitely the more sensible way to do it for sure. I can’t argue with that.