If you have a car with a power steering pump.. you can actually just use the stock 2020 scat pack belt size and itll fit perfect 👌.. non ps needs the 1" shorter.. any competent auto parts store can find that for you.
@brandonUwanawich9542 жыл бұрын
Hey I got a few bolt ons should I go with a 18% underdrive? Or 15% and do I need any belts I got a 2020 scat
@brianschargerrt9416 Жыл бұрын
Would this apply to the 2015 5.7 belt as well. I'm using the 15% UD pulley.
@Srtshadow3 жыл бұрын
Srtshadow checking in!!! Always a good vid bro constantly teaching us in the Mopar community. 💪🏾💪🏾💪🏾
@waterbox_box_joe3 жыл бұрын
What’s good shadow 💯💪🏾🔥
@bennyvazquez35473 жыл бұрын
As always extremely informative 😉
@ktwosrt8life3 жыл бұрын
Bro you just need a GoPro camera strapped to your head 24/7 your knowledge is incredible you explained it very very clearly
@joseaguirre20823 жыл бұрын
Just got done doing my ati underdrive pulley install. Thanks for the video man.💪🏽💪🏽
@courtneytownsend98613 жыл бұрын
What’s all needed ?
@Too-slow4852 жыл бұрын
How is it man? And what belt did you use?
@bobstone5022 жыл бұрын
What all needs to be removed? Very interested in doing this. Thanks
@joseaguirre20822 жыл бұрын
@@bobstone502 pretty much the fans
@bobstone5022 жыл бұрын
@@joseaguirre2082 thanks sir.
@Robbinsbuiltgarage3 жыл бұрын
Great video! Might have to get one now!
@Scavenger13203 жыл бұрын
Nice! I've done pulleys in all my Rams and one day will do it on my 1320, but not till after I see what it does with weight reduction only. I had similar results in my Rams too. I dyno'd one once and I think I gained about 14 hp with the underdrive pulleys.
@Fawazalsobay3 жыл бұрын
Great I have 5.7 ram 2020. I'm looking for the best pulleys in the market. What do you recommend? Ati or bbk
@Scavenger13203 жыл бұрын
@@Fawazalsobay when I talk about all my Rams, they were actually all pre-hemi. A 93, 97 and an 02. All with the 318 and 360 Magnum V8s. The 93 and 97 I had March pulleys. Not even sure they're around anymore. My 02 I think it might have been an ATI though. I honestly don't remember. I'm definitely going with this same ATI for my 6.4, and if I were getting one for my current 5.7 Ram, I'd probably go with ATI also just from what I've read about them.
@eunit082 жыл бұрын
Very informatative. Put that on the list
@glockmodder3 жыл бұрын
im gonna do it thanks man
@YachtLife3 жыл бұрын
You would post this as soon as I go off break.....I'll be back... 🙄 Back: that was pretty impressive. Not gonna lie. Pretty decent gains for a pulley
@Rick-fe8xn2 жыл бұрын
I had a hunch this would be a great idea to do! I'm glad to see a 6.4 getting love too, I'm considering a mild build on mine willing to drop 15k to see what I can get out of the 6.4. I could jus go hellcat but don't want another payment
@camirocz2 жыл бұрын
Better a payment than wasting 15 k and not keeping up to a stock Hellcat. Plus value is always there in the Hellcat.
@Rick-fe8xn2 жыл бұрын
@@camirocz yeah you're right, I love my car but dodge didn't make the 392 easy to build on at all.
@alexander_39232 жыл бұрын
@@camirocz with 15k u can make a scatpack keep up with a hellcat lol its not like they are the fastest thing in the world a fbo 10speed keeps up with them lol
@Bottle.fed_RT2 жыл бұрын
@@alexander_3923 pass a hellcat with a 15k budget lol. Long tubes, fbo, and a 150shot with a VERY good tune and e if possible. Could easily drag a cat assuming its stock lol
@brandonUwanawich9542 жыл бұрын
@@Bottle.fed_RT exactly I keep up with cars till 130 then they pull 2-3 cars I got vids to proof it lol
@200shotramhemi43 жыл бұрын
Mackbuilt Spitting Game 🔥 🔥 🔥 Hemi Gang!
@mrhyde0705 Жыл бұрын
I bought 1 to adjust for the aggressive cam i threw in. And at almost 200k miles it is overdue. Throwing it in tomorrow witha new water pump and belt.
@jasonneal3 жыл бұрын
Did you have to change anything on the tune? Or can you bolt this on and go?
@bkny67982 жыл бұрын
Where did you get your engine cover done to match your car? Thank yoiu
@sergioesparza21533 жыл бұрын
Goat 🐐
@97StiOutback3 жыл бұрын
I'm looking to do the ati "stock" replacement you does this one inch belt situation happen with that you think? I think you did the overdrive one and you said you had no power steering
@nissanlover1221 Жыл бұрын
What was your numbers before the pulley? Was it the first set of numbers?. I have a 2018 scat T/A would I have to get a smaller belt?
@darrylgiles28853 жыл бұрын
Love it Mopar more power
@Davis29200220012 жыл бұрын
Thank you for making videos getting down to the business and not talking about your life story or your friends in the background yapping like these other clowns 🤡.
@onefastlife50173 жыл бұрын
I been wanting to do the SLp on my 6.1, worth it ?
@Krystopherbyers233 жыл бұрын
Good shit good to know I know you miss banging gears ⚙️ would you be putting a 15 on yours as well
@OMGITSMRMACK3 жыл бұрын
Im going to do the 13% that they offer
@clarencesmith35yahoo3 жыл бұрын
I went wit the SLP underdrive because I wanted it to look like stock. They definitely do work.. one of my lil secrets is out🤧
@charlie300c23 жыл бұрын
Where did you get it from? The only one I see is on HHP but it’s out of stock.
@clarencesmith35yahoo3 жыл бұрын
@@charlie300c2 they all outta stock. Mack got em on back order since he advertising
@charlie300c23 жыл бұрын
@@clarencesmith35yahoo damn, that fat bastard😂
@OMGITSMRMACK3 жыл бұрын
@@clarencesmith35yahoo I had 7 at the shop for builds.. but I don't use slp.. I had a bunch in Houston and tossed them in the trash lol.. not kidding.. I wanted a real harmonic damper.. slp is just alot smaller.. 25% if I recall correctly.
@clarencesmith35yahoo3 жыл бұрын
@@OMGITSMRMACK well you threw a few ponies inna trash. I tested it onna dyno and it gained 8 hp and 12whp on a Nag1
@LT1Key2 жыл бұрын
Would you recommend this upgrade on a 2020 5.7 Charger? Ive been looking into it but not a lot of research on it. Was thinking about going with a 15% ATI.
@DL101ca Жыл бұрын
Yes. The engine revs much faster I find.
@S.trillhill3 жыл бұрын
Curious as to why you removed the power steering pump is it just bc you dont care ab power steering or for weight savings possibly
@OMGITSMRMACK3 жыл бұрын
Its electric
@davesogn33293 жыл бұрын
Well did he gain any power
@BunnyBUNGALO3 жыл бұрын
Was it noticeable? Ordered one for my 1.6t Veloster. If it did anything for that beast of an engine it should help me too
@mrmedium79842 жыл бұрын
Hyundai doesn't use a procharger. Its gas operated
@BunnyBUNGALO2 жыл бұрын
@@mrmedium7984 lol what? This isn't a supercharger pulley, it's a crank pulley and being "gas operated" has nothing to do with whether or not a car is supercharged.
@quevonlove30863 жыл бұрын
So I have a 6.1 and I'm looking at different Super Dampers which one would you recommend on a 6.1 N/A build any response is appreciated
@OMGITSMRMACK3 жыл бұрын
Im going to do the same 15% if they make it for mine. Haven't looked at their % yet.. but around that would be my plan.
@quevonlove30863 жыл бұрын
@@OMGITSMRMACK Gotcha this is what I'm finding off the shelf a.) 6.780 OD 5% b.) 5.5 OD 13% UD c.) 7.074 OD 17% OD so based on what you are saying maybe my option I should look at is C?
@OMGITSMRMACK3 жыл бұрын
@@quevonlove3086 yea the 13%
@tomg90263 жыл бұрын
I might have missed it, but what percent underdrive are you running? What's the deal with MMX saying that it is OEM equipment on the 392?
@OMGITSMRMACK3 жыл бұрын
I dont keep up with what other people are saying.. I haven't been in a Facebook group in over 5 years and I mind my business otherwise. 🤷♂️.. Dave definitely wouldn't refer to this as oem equipment.. the pulley is a 15%ud
@DL101ca Жыл бұрын
ATI dampener comes stock on 392 crate engines, not the underdrive pulley, but you can easily swap to an underdrive shell if you so choose.
@zacharyohare60292 жыл бұрын
So would an ATI pulley with a blower still have any gains or is it just irrelevant at that point relative to parasitic drain/boost provided. Love your vids man, so helpful - just starting my hemi journey.
@Bottle.fed_RT2 жыл бұрын
Thats when you look into a overdrive pulley.
@yrnquinn26832 жыл бұрын
I just recently purchased one for my scatpack and wanted to know where can I find the belt at ?
@OMGITSMRMACK2 жыл бұрын
1" shorter belt is what you need
@yrnquinn26832 жыл бұрын
@@OMGITSMRMACK can I buy one from autozone or oreilly
@brandonUwanawich9542 жыл бұрын
Hey can you send me the link for the one you bought and did you gain any whp
@milenkogt3 жыл бұрын
So if factory belt length is dayco 5060820 (82") for electric PS 392 cars, the 1" shorter belt should be a 5060810 (81")?
@OMGITSMRMACK3 жыл бұрын
Don't have it in front of me. Sounds right to me
@adaamhftw3 жыл бұрын
Did the 5060810 (81) work? I just got my ati ud %15 for my 5.7. From what I’ve seen 6.4 and 5.7 share same stock factory belt length.
@TheJMan1K2 жыл бұрын
Did ever find which one worked?
@S.trillhill2 жыл бұрын
@@adaamhftw did this belt work?
@adaamhftw2 жыл бұрын
@@S.trillhill actually just picked it up and will let you know
@brandonUwanawich9542 жыл бұрын
Hey bro I really wanna do this could you tell me the link for the part please thanks
@DL101ca Жыл бұрын
ATI 918454
@SrtHemiPower3 жыл бұрын
Link to this pulley and what belt to use
@Too-slow4852 жыл бұрын
^
@craigsixta9832 жыл бұрын
I got the slp/powerbond.
@brianschargerrt9416 Жыл бұрын
Do you have to change anything in tune after install?
@OMGITSMRMACK Жыл бұрын
Nope. Bolt on and enjoy.
@732Mopars3 жыл бұрын
I got a question about running my car on the dyno, 2010 6 speed R/T. I went to a dyno day at a local stang shop just for fun and my numbers were WAY low for my setup. 1st pull 420whp, 2nd pull 450whp. 392 cam, 7psi, long tubes on 93. I held the TC button until the ESP BAS light turned on. However traction was still kicking in, and is why my numbers were low by 50+whp Any way around this? I was on a Dynojet, a stock 5.7 made 346whp right before me.
@OMGITSMRMACK3 жыл бұрын
Pull the abs fuses out.. traction control won't work then..
@noavgrt64902 жыл бұрын
Did you pin the crank?
@DL101ca Жыл бұрын
Not necessary unless you're going to drive a supercharger.
@TheJMan1K2 жыл бұрын
No tune needed just drop it in?
@OMGITSMRMACK2 жыл бұрын
Yup
@frederickbryant7347 Жыл бұрын
What's the part number for your ATI damper?
@DL101ca Жыл бұрын
The 15% underdrive for 5.7 and 6.4 is ATI918454.
@miswaw Жыл бұрын
@@DL101ca can You please write part number of that 1 inch shorter belt? Please please 🤪
@nissanlover1221 Жыл бұрын
It seems the 918487 is for the 6.4
@benwolfe577 Жыл бұрын
For future reference, your hand was in the video more than the car
@OMGITSMRMACK Жыл бұрын
You thought this video was about a car? Jokes on you.
@ParmaPimp3 жыл бұрын
Do you think a tune after the install would give it even more? I didnt realize ATI had a underdrive pulley, I only remember they had over drive ones until I looked the other day. Definitely getting the ATI over the old SLP pulley for the 6.1.
@OMGITSMRMACK3 жыл бұрын
It doesn't change anything in the tune.. i plan to tune the car.. but the pulley literally will not effect it at all.. and anyone who tells you differently is a tard or just out to rob you.. its a legit bolt on with nothing else needed.. I guess thats part of the beauty.
@Scat.Packkin.2 жыл бұрын
On the site it says 18% or 6% and are the hub, damp bolt, and double pin worth the extra coin ??
@OMGITSMRMACK2 жыл бұрын
I have 3 new 15% in front of my face.. they definitely make them for the vvt in a 15%.. and there is no point in pinning something that a blower car
@Scat.Packkin.2 жыл бұрын
@@OMGITSMRMACK how much ??thanks for the info
@KennyLauderdale2 жыл бұрын
Okay... What is this about
@DL101ca Жыл бұрын
Go back to sleep ,dun worry abt it...
@thgilne50602 жыл бұрын
How does the underdrive pulley effect day to day driveability
@OMGITSMRMACK2 жыл бұрын
Its normal. I wouldn't do it on something maybe with a big audio system.. but with that said.. my voltage on my stock car is the same as it was crusing around.. no ill effects
@DL101ca Жыл бұрын
It wouldn't. Keep an eye on your battery charging if you do only short trips.
@dmbnorthphilly2 жыл бұрын
This 15 or 13?
@OMGITSMRMACK2 жыл бұрын
15
@dmbnorthphilly2 жыл бұрын
@@OMGITSMRMACK happened to find out the correct belt?
@OMGITSMRMACK2 жыл бұрын
@@dmbnorthphilly just get a 1" shorter than stock and it works.