No video
Atomic Zombie Terminator Chopper Gets an 8000W Hub Motor Conversion!
Рет қаралды 1,048
Күн бұрынHere we upgraded the 3000w Kunray brushless motor / sprocket / chain setup to TexasNEV's custom made 8000W brushless hub motor. Available now on E-Bay! Not available anywhere else!
@TexasNEV 2 жыл бұрын
Here is a link to the hub motor kit and the lithium cells! Hub Motor Kit: www.ebay.com/itm/275325235374 Lithium Cells: www.ebay.com/itm/275291765027
@michaelbrown1438 Жыл бұрын
Nice conversion of the Vigilante. Thinking of a similar project for mine.
@TexasNEV Жыл бұрын
Thx.. I really need to get the new video out......
@robertparker9725 Ай бұрын
Dope Chopper
@TexasNEV Ай бұрын
@robertparker9725 thx! If you have any questions, please feel free to contact me at info@texasnev.com
@namegame 2 жыл бұрын
sounds awesome
@TexasNEV 2 жыл бұрын
Too terrified to try full throttle.. Won't even bother that attempt until I get some real brakes on this monster.... This setup has the 3 speed selector switch and "low" is 42mph.. Just sayin...
@malibusteve70 Жыл бұрын
No torque arms on the swingarm? And those dropouts are tiny for that kind of power. Careful out there! That thing is a death trap!
@TexasNEV Жыл бұрын
Doesn't need torque arms. The thick steel I used for the rear forks along with the slotted tabbed 16mm washers holds it in place. A new video is coming out soon with a bunch of major upgrades...
@malibusteve70 Жыл бұрын
@@TexasNEV doesn't need torque arms?! 😂
@TexasNEV Жыл бұрын
@@malibusteve70 I've modified it since this video. Have a nice evening.
@DavidSanchez-li8fu 3 ай бұрын
Hi. Just emailed you. Please advise. I have a Philodo H8 48v 23ah downtube battery. Would like 2 buy your set up on ebay. Would it work on my Philodo H8 if I remove rear motor & controller & install yours? Would I need torque arms? Another question. If I buy a 72 Unit Power PAck battery would it be compatible with your system? Please let me know. Thank you.
@311mdub 2 жыл бұрын
Where did you say you got the frame for the bike from? Can you post a link if possible? Seeing this maybe I’ll just copy what you’ve built..
@TexasNEV 2 жыл бұрын
Ok so this frame I built from scratch, but the regular Chinese import fatbike I got was something like this: www.amazon.com/PanAme-Mountain-21-Speed-Suspension-Anti-Slip/dp/B08HRVTDZG/ref=sr_1_1_sspa?crid=1PRZVV2D5ICGV&keywords=26%22+mens+fat+bike&qid=1655771722&sprefix=26+mens+fatbike%2Caps%2C145&sr=8-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUExTE5USjZLOFdPR0VZJmVuY3J5cHRlZElkPUEwNTY5MjE3M1NYS0NYMVZDR1hLMSZlbmNyeXB0ZWRBZElkPUEwNzA3NTYxMUFGS0RGQzJPUUk0QyZ3aWRnZXROYW1lPXNwX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=
@accordv6er Жыл бұрын
So... Could the hub motor be adapted to turn a belt or chain? CVT go kart might be a good application
@TexasNEV Жыл бұрын
What would it turn? The hub IS the motor. No belt / chain / cvt, single speed. Goes faster than you ever need it to.
@luxa_soc 2 жыл бұрын
I'm trying to a bike converted real soon. May take it to you so you can install it for me. Is 5kw hub motor is all you offer for hub motors?
@TexasNEV 2 жыл бұрын
Thanks! Glad to help. Yes I just have the 5kw/8kw peak hub motor kits w/ color display and the lithium cells to match.
@luxa_soc 2 жыл бұрын
@@TexasNEV I'm going to email you
@TexasNEV 2 жыл бұрын
@@luxa_soc Amazing build you have.. Wow.. and here I thought mine looked cool..
@luxa_soc 2 жыл бұрын
@@TexasNEV it's custom made but unfortunately they are about to make it. It's from Germany
@TexasNEV 2 жыл бұрын
@@luxa_soc so cool looking....
@311mdub 2 жыл бұрын
Thing is awesome, say if you use same motor on a normal mt bike, do I need to keep the pedal/chain on the bike or could I just remove pedal and maybe put some sort of peg in the area pedals would normally be? How are the fat tires? Do you feel they have better grip than standard bicycle tires?
@TexasNEV 2 жыл бұрын
Thanks, well that is up to you. It'd be nice to know that if you ran your battery down or had a problem you could at least peddle home. :) I love fat bikes.. I still have another regular one like the 48v conversion I did but left it alone. :)
@311mdub 2 жыл бұрын
@@TexasNEV so I’m looking on atomic zombie, which plan did you purchase for the skynet bike? You fabricated the entire frame yourself? That’s impressive you did a great job
@TexasNEV 2 жыл бұрын
@@311mdub Thanks, I'm pretty proud of it, and yes it 100% from scratch, watch the videos, it gives all the info..
Фани Хани
Рет қаралды 2,1 МЛН
Fully Charged Show
Рет қаралды 265 М.
E-bikeguy
Рет қаралды 595 М.
Josh Street Design
Рет қаралды 32 М.