No video

AtomRC/Eachine Killer Whale: Maiden flight and setup tips!

  Рет қаралды 15,196

Painless360

Painless360

Күн бұрын

Link to this on Banggood: bit.ly/3xhXR7M
(since I ordered mine it appears that they are issues shipping to the UK, check out the website for the latest..)
My OpenTX plane setup video: • EdgeTX and OpenTX: Sim...
Thank you for taking the time to watch the video. You can find me on social media at / painless360 and / painless360
Want to support the work I do here creating content and answering questions? Please consider subscribing and supporting the channel by visiting / painless360 or you can support me by donating using paypal.me/pain.... Where-ever you can support your local R.C resellers and shops. They need your support more than ever.
If you liked this you can see more R/C related videos on the channel - / painless360 , use the playlists to find entire series on topics you might find interesting.
Be aware that any comments that are rude, disrespectful or use bullying or threatening language will be deleted. Pedantry isn't encouraged either. This channel is all about helping others and passing on advice and ideas so please comment in that spirit. Comments that don't adhere to these simple rules will be deleted.
Thanks again for watching, support each other and the hobby as we have enough external drama without making more for ourselves.
LIKE and SUBSCRIBE and above all - Happy Flying!

Пікірлер: 32
@Videolinquency
@Videolinquency Ай бұрын
I reinforced the tail surfaces pushing two shortened BBQ sticks through each fin and into the stab, which was easy and surprisingly effective. The tail feels sturdy now.
@MrVasmikey
@MrVasmikey 3 жыл бұрын
Thx Lee! I love your flying field. So wide open and gorgeous.
@stanordave
@stanordave 3 жыл бұрын
With the price drop, decided to get it! Using a Matek 765 on Ardupilot wo/the distribution board. Easier to make a 'Y' for the motors. Only problem I have so far - the front hatch has a latch and the the rear one lifts so I've already had to reglue the latch pin thing as I keep trying to pull it open...:)
@MrMartinRome
@MrMartinRome 3 жыл бұрын
Hi Lee, this looks like it flies a lot like my Multiplex Twinstar. Lots of power but a bit floaty. The Twinstar can fly easily on a standard 2200 3s. Nice review.
@MessingWithCode
@MessingWithCode 7 ай бұрын
Great Video , As Always!!!
@MCsCreations
@MCsCreations 3 жыл бұрын
Pretty amazing flying, Lee! 😃 Pretty impressive airplane! I loved it! Stay safe there with your family! 🖖😊
@jamesemery1
@jamesemery1 3 жыл бұрын
Nice floaty plane. looking to build something similar at a later date. stay safe.
@57andyp
@57andyp Жыл бұрын
The supplied motors appear more than adequate but if you were going to start from a kit rather than 'rtf' what motors currently available would you choose to power the Killer Whale? The kitted specs don't appear to be a common size.
@Selvaris
@Selvaris 2 жыл бұрын
hey Pilots I also have the Killer Whale. I wanted to have a steerable frontwheel so i can drive the plane back on the ground and don't have to walk there to collect it. I did not find anything online. that is why i made a 3D printable landingear myself.
@Selvaris
@Selvaris 2 жыл бұрын
you'll find it at the usual 3D print websites.
@pilotmiami1
@pilotmiami1 2 жыл бұрын
Thenks
@IanF-FPV
@IanF-FPV 3 жыл бұрын
Awesome review Lee. I wanted to get this model but looking at the nose area it appears it will not crash well. I ended up going with it's smaller brother the Dolphin.
@typxxilps
@typxxilps 3 жыл бұрын
missing some key details - how stupid are they that they can not get things sorted out and deliver the basics needed by everyone. They watch these videos, they even link to them and then some models get better till the next model comes out and everything is forgotten cause if they deliver a manual then things are missing. The AR Wing Pro was beyond the Volantex stuff the first plane that was working out and where you could see or feel the progress achieved - thanks to Lees effort. I have gotten 2 or 3 just to have one for the kids if things go wrong but the good planes survive and the boxes get dust. REALLY NICE DRONE FOOTAGE TOO which gives a far better impression than usually. I might get one - even if it will be chrismas but I will add it to my list. thanks a lot !
@johnstotler6237
@johnstotler6237 3 жыл бұрын
I’d love to see a Killer Whale vs Albabird comparison.
@xgluo852
@xgluo852 2 жыл бұрын
So Great video, Lee ! Also I would like to recommend you a relevant product called SIYI HM30 Full HD Image Transmission System, which can get 40 km or up and the latency is very low.
@Painless360
@Painless360 2 жыл бұрын
150ms is not low... Happy flying
@mean_cheese_fpv1059
@mean_cheese_fpv1059 2 жыл бұрын
150ms!!! 🤣
@pilkinn
@pilkinn 3 жыл бұрын
Banggood still haven't fixed the shipping issue, listing says ... "CAN NOT ship to United Kingdom". We're getting this more and more recently with Banggood although AliExpress are worse.
@tvhs1975
@tvhs1975 3 жыл бұрын
Great Video as always. Yes, manuals are always lacking with models from Banggood. It looks a bit pricey to me to be honest. Last couple of shipments from Banggood to the US was lost for me 😩. Glad i had insured shipping. Any plans on doing a long range V tail model with Ardu pilot, gps and all the other goodies for a ground station setup??
@Painless360
@Painless360 3 жыл бұрын
All of the topics for that build are covered in the Pixhawk 2020 series. No plans for another Arduplane just yet...
@michalp.4975
@michalp.4975 3 жыл бұрын
Great review Lee. I wonder will you ever have AtomRC Dolphin for reviewing ( looks gorgeous ) Happy Flying!
@Painless360
@Painless360 3 жыл бұрын
I may do after seeing how nicely this flies..
@alvandergoot7237
@alvandergoot7237 3 жыл бұрын
Thanks Lee great review and insight as usual. Im hoping you will do a review of the Talon 250g. I ordered the complete ZOHD FPV package as my first FPV. Cheers.
@antlerhanger
@antlerhanger Жыл бұрын
I've been flying the plane with the kopilot . I want to use the Matek f405 wing ..How do I connect the fc battery to the power board of the killer whale ? Thru esc 1 ? I can do the rest , just not sure how to get the power to the power board .
@Painless360
@Painless360 Жыл бұрын
Connect the existing battery cables in the model to the power output of the flight controller. The outputs are connected as shown in my INAV builds.. best of luck
@justinfrancis2644
@justinfrancis2644 3 жыл бұрын
What are the flight times for your battery? And to what distance away could fly to?
@Painless360
@Painless360 3 жыл бұрын
Depends on the battery. You can figure that out from the times I got in the video.. Best of luck
@GNiessen
@GNiessen 3 жыл бұрын
It seemed to have a lot of side to side wobble.
@Painless360
@Painless360 3 жыл бұрын
See my comment on wind and flying weight. Happy flying!
@DronePlayground
@DronePlayground 3 жыл бұрын
First 😍😍👍👀🇭🇷
@myway6335
@myway6335 3 жыл бұрын
This plane is one of ugliest I have seen...
@Painless360
@Painless360 3 жыл бұрын
Beauty is in the eye of the beholder. But I know what you mean!
WOW!! AtomRC Dolphin Maiden Flight and Setup tips
20:26
Painless360
Рет қаралды 33 М.
天使救了路飞!#天使#小丑#路飞#家庭
00:35
家庭搞笑日记
Рет қаралды 86 МЛН
艾莎撒娇得到王子的原谅#艾莎
00:24
在逃的公主
Рет қаралды 50 МЛН
Eachine / ATOM RC - Killer Whale - 1255mm - Unbox, Build, & Maiden Flight
4:25:23
AtomRC Killer Whale - a.k.a. The Razor Crest
18:49
ArxangelRC
Рет қаралды 15 М.
AtomRC Eachine Killer Whale 1250mm twin motor
26:45
Andrew Newton
Рет қаралды 25 М.
AtomRC Dolphin: Update, tips and flying report
14:13
Painless360
Рет қаралды 18 М.
FPV Glider EPIC Save by Autopilot - RCTESTFLIGHT -
11:56
rctestflight
Рет қаралды 207 М.
Flying Fish W650 & Mobula Delta Wing FW650 | My Opinion
9:48
Joyplanes
Рет қаралды 13 М.
Waypoint Guidance with an Amateur Rocket
23:42
Lafayette Systems
Рет қаралды 244 М.
Best 'planes and wings: My personal favourites! (April 2022)
17:26
天使救了路飞!#天使#小丑#路飞#家庭
00:35
家庭搞笑日记
Рет қаралды 86 МЛН