Atomstack A5 Pro + | Budget Friendly Laser Engraver

Atomstack A5 Pro + | Budget Friendly Laser Engraver | Test + Review

Рет қаралды 66,363

Жыл бұрын

Atomstack A5 Pro + | Budget Friendly Laser Engraver | Test + Review
In this video I will show you what the Atomstack A5 Pro+ can do, how it performs and what you can achieve with it. I hope my video will give you some solid information thanks to which you can make an educated purchase.
Disclaimer This Atomstack A5 Pro + laser was supplied for review by lasercome.com free of charge for a paid video promotion. The words and thoughts are my own, and I have not been instructed in anyway to say nice things about the product.
Shopping:
- Atomstack A5 Pro + ( coupon code for you, 250$ after the code : A5pro+ ) - www.lasercome.com/collections...
- Atomstack F2 honeycomb, Coupon: NEW-10$, can cut 10$
www.lasercome.com/products/at...
- Atomstack R3 Pro Rotary Roller with Separable support module and Extension Towers Coupon: NEW-10$, can cut 10$
www.lasercome.com/products/at...
- Atomstack M100 130W Laser Module With Air Assist System Coupon: NEW-10$, can cut 10$
www.lasercome.com/products/at...
All my tools, woodworking accessories and video making kit is now in one place for you to check out. These are Amazon affiliate links. With a purchase through this link, you get an awesome tool and you will support my channel without spending a penny more. As an Amazon Associate I earn from qualifying purchases, thank you for your support!
Link to Amazon is just below! Thanks!
Tools I use and recommend:
www.amazon.co.uk/shop/casualdiy
Shop on Banggood - www.banggood.com/custlink/DmK...
You can now support my channel via Patreon. If you feel my content adds value for you or its entertaining then help me continue to do so.
Any donations via Patreon are so much appreciated, you can find out more here: / casualdiy Thanks!
You can support my channel by dropping some change in the Casual DIY Tip Box. Thanks for your support!
www.paypal.me/TomaszFranczyk
You can find me on:
Instagram - / casualdiy
Twitter - / casualdiy
Facebook - / casualdiy
Etsy - www.etsy.com/uk/shop/CasualDe...
Web page - www.casualdiy.com
Email - casualdiyuk@gmail.com
#casualdiy #woodworking #atomstack
DISCLAIMER
My videos are for entertaining purposes only, your safety is your responsibility. Please do not follow my actions if you find them unsafe.

Пікірлер: 179

@MCsCreations Жыл бұрын

Pretty impressive machine, Tomasz! 😃 Fantastic review! Thanks!!! Stay safe there with your family! 🖖😊

@CasualDIY Жыл бұрын

Yes its not bad at all. Stay safe my friend 👍

@sherrykirchoff5543 7 ай бұрын

Thank you for such an informative demo video! My street brother gave me this model yesterday as an early Birthday/ Holiday present, so I can get busy learning how to engrave holiday designs for our Art Shop. I’m completely new to laser-work, so equal parts stoked and nervous. You have been extremely helpful, thanks bunches! Edit: Subscribed, of course. Gonna check out more of your videos. 🎉

@CasualDIY 7 ай бұрын

Very cool! Thank you and welcome aboard 👍

@idlersdream826 Жыл бұрын

Wow! That is the most impressive demo you've done Tomasz 👍 Also, my wife would love the colour 😂😂

@CasualDIY Жыл бұрын

Hehe yes the colour surprised me a bit lol great kit I have to say.

@johnyoung2023 6 ай бұрын

Thanks for this had one for Christmas. Definitely has gave me confidence to go forward and start engraving

@CasualDIY 5 ай бұрын

It's a good starting point for laser engraving 👍

@emmanaughton8693 5 ай бұрын

I’ve just bought this. Does the program you use run through the test.

@CasualDIY 5 ай бұрын

@@emmanaughton8693In the video I'm using LaserRGBL fir the tests as well. However now I'm using Lightburn in all my laser work

@samuveljayaraj1272 4 ай бұрын

Thanks for the video very detail explanation and honiest review and love the way of explaining....😊

@CasualDIY 4 ай бұрын

Glad it was helpful!

@kenthesparky178 Жыл бұрын

The best one up to now👍

@ManiacRacing 8 ай бұрын

I got mine by lurking and looking for sales. Finally found A5 Pro+ on clearance for $100 and it's been a great beginner machine. While I do NOT get results like the video when cutting, I will say the machine does very nice engraving on glass, wood, painted or anodized metals, and it does excellent ceramic tile engraving with the white paint method. I'd say it's a very good beginner buy since I was 100% clueless when mine arrived, and I was burning wood the same day!

@CasualDIY 8 ай бұрын

Thanks for sharing

@LifeHacksAndMoneyStacks 4 ай бұрын

Nice… where did you get it for $100? Is that 5, 10 or 20w?

@305dade8a Жыл бұрын

Excellent video buddy I subscribed Thank you. How much did this unit cost you and is it user friendly? Is the software complicated?

@CasualDIY Жыл бұрын

It costs about $250, I'm using a free software called LaserRGBL it's very simple to use but the options are limited. There's a better software called Lightburn but it's payed. However it's far better with lots of options. The laser is plug and play, super easy to use with LaserRGBL to get you started.

@mikethompson9745 Жыл бұрын

So mine just showed up today, and the quality of the parts and the absolute best packaging , add that to a black Friday price of $229 delivered. I almost can't go wrong, I got this to accent my wood working, I do not intend to cut but the capability is really good, I am using Laser GRBL and that is really simple for a NOOB like me, As my skills grow I am sure the machine will allow me to do more. Do you plan to get the rotary roller, now that looks like a homerun for a wood turner like me. Your video was very helpful Sir I thank you for it.

@themullenmarketwoodworking Жыл бұрын

Haha I’m in the exact same shoes. I just got the same one with the Black Friday deal. I built it last night in 30 minutes. And me and my 9 year old did a first cut before soccer practice after work tonight. Very excited to add this to the arsenal. Best of luck to you and whatever you make!

@CasualDIY Жыл бұрын

Got a rotary tool for my Ortur lasers but not used it yet as I don't have anything that would be suitable for it to engrave lol. I think I need to buy a lathe now 🤣

@barry.w.christie Жыл бұрын

Would be interesting to see the results using some materials designed especially for laser cutting/engraving, i.e. laser plywood ... thanks for the demo, very interesting :)

@CasualDIY Жыл бұрын

Laser plywood you say 🤔 I shall order some as never used it before.

@barry.w.christie Жыл бұрын

@@CasualDIY I'm not sure what the difference is, I just know that it exists ... I had dealings with a laser cutting service for a case I designed for the Raspberry Pi, and seem to remember him mentioning about 'laser grade' materials.

@CasualDIY Жыл бұрын

@@barry.w.christie well it seems it does exist I ordered 4 sheets 3mm thick, we will see how they cut and engrave 😅👍

@vanloggins Жыл бұрын

I found a seller on the Walmart website about a month or so back who had the AtomStack A5 Pro listed for 49 dollars, and ordered it figuring that the order would get cancelled as there was no way I would be getting a Laser engraver that lists for well over 200 dollars for that price. Imagine my surprise when it didn't get cancelled and I actually got the item I had ordered. Other than opening the box to verify the contents I haven't done anything else with it yet, I need to figure out how to calibrate / setup the printer so I can get easy to reproduce results so I can make stuff to give as gifts and even some stuff to sell when I get everything ready to also start selling my 3D prints

@LifeHacksAndMoneyStacks 4 ай бұрын

For that price…. I would be shocked if it’s not a AliExpress or other knock off

@Pony-Corral Жыл бұрын

Today was my first attempt with the A5. Works great. Where do I find the Engraving and Cutting tests?

@CasualDIY Жыл бұрын

Depending on what software you are using. Im using LaserRGBL and the way I done it was very labours as each piece was a separate file. If you can access Lightburn then you can download one file that will do it all ( just search Google for free laser engraving test)

@martinwaltho2688 Жыл бұрын

hi thank u for doing vid can you post the times it took to do samples

@CasualDIY Жыл бұрын

Hi sorry but can't remember exact times

@toniivorek4742 Жыл бұрын

Hi there. Thanks for the video ✌🏻. What about the time? How much time did it take to make your picture?

@CasualDIY Жыл бұрын

Hi, about 15 minutes as far as remember

@keukenrol 9 ай бұрын

I was looking for a paper cutter. I need to make hundreds of custom cards a week, thus automating the cutting would improve the speed drastically instead of manually cutting it with scissors. How does it handle paper cutting? How clean are acrylic cuts? What is the maximum acrylic cutting depth?

@CasualDIY 9 ай бұрын

It will cut paper just fine on lower settings. Acrylics wouldn't go thicker than 3mm and black is the colour you will get best results. Cuts will be clean - if you get the settings right. Its a 5W module so don't expect miracles but for paper cutting you don't need a lot of power.

@KIDTAKO Жыл бұрын

Aloha! How does this do on chrome or polished metal and hardened steel stock? I have a crap-ton of new Craftsman tools to engrave.

@CasualDIY Жыл бұрын

5W module will not very the best fit for that task. I would suggest a minim of a 10W module and for best results 20W

@RafaelCabusGantois Жыл бұрын

Thank you for the video! Is it possible to use it wireless with a smartphone? I don't know, maybe a USB wireless/Bluetooth adapter

@CasualDIY Жыл бұрын

It's a budget laser and doesn't have those options.

@ALPHAJACK78 9 ай бұрын

Great video, but what about the smoke? Fumes, are they exhausted out somehow? I saw a plexiglass box with an exhaust fan, SCULPFUN Laser Engraver Enclosure w/ Powerful Suction Fan Fr Laser Engraver K7M5, looks pretty good. Thanks for the review

@CasualDIY 9 ай бұрын

Yes having an enclosure is a must if you want to use it on a daily basis. Unless you got a large and well ventilated workshop.

@ALPHAJACK78 9 ай бұрын

@@CasualDIY Thank you

@AllThingsGundam 11 ай бұрын

How does this one do for etcging glass? I am coming from a 3d printing back ground and I can tell you its more of a heachache then anything, This one looks like what I need!

@CasualDIY 11 ай бұрын

Not tried it with 5W module I think it would be too week, however if the glass was prepared correctly then it could just work.

@ManiacRacing 8 ай бұрын

I have this machine, and it does excellent engraving on glass! I use flat black to absorb the laser light and it leaves a sweet frosted etch. It will not engrave clear glass or acrylics

@Madebyraphael Жыл бұрын

Super video! Pozdrawiam👍👌

@CasualDIY Жыл бұрын

Również pozdrawiam 👍😄

@mikethompson7290 Жыл бұрын

So the add for this says its 40w do you know why the discrepancy? I noticed on the pic you had the laser go diagonal why?

@CasualDIY Жыл бұрын

40w is just part of the name of this laser not its power. Confusing yes. It's a setting in the software, you can go horizontal, vertical or diagonal. Sometimes you can get getter engraving quality when it's set up in different ways or in some cases depending on what you are trying to engrave it will be faster. Just another option that's worth checking out and seeing what works best for you

@MatthewHoffman2014 Жыл бұрын

what is the platform you are using to place your material on while engraving?

@CasualDIY Жыл бұрын

It's this mate - DEWALLIE Honeycomb Laser Bed 440x440x22mm www.madethebest.com/products/dewallie-honeycomb-laser-bed-440x440x22mm?_pos=4&_sid=d61e6e653&_ss=r&aff=96

@user-ut5zh7dw2x 6 ай бұрын

can you tell me where you got the engraving test and the cut test? thank you for your help

@CasualDIY 6 ай бұрын

I made it myself 👍

@suddenlyhuge 6 ай бұрын

Can I contribute to your channel for the 2 test programs

@jotarojoestar1399 Жыл бұрын

Can you please share your files for the engrave and cut tests that you've done here?

@CasualDIY Жыл бұрын

Sure drop me an email - casualdiyuk@gmail.com

@rcane6842 Жыл бұрын

Impressive machine. Will you eventually try etching resins using this?

@CasualDIY Жыл бұрын

Hmm not though doing that to be honest. Need to have a look into that

@rcane6842 Жыл бұрын

@@CasualDIY I'll just hi-jack my comment for another relative topic. Have you checked about SLA Printers? Those are 3D printers but use resin, instead of filaments.

@CasualDIY Жыл бұрын

@@rcane6842 don't have funds for those but when opportunity arrives then for sure I will check it out

@sherrykirchoff5543 7 ай бұрын

I frequently work with UV Resin and glow pigment. Have y’all tried engraving it yet?

@brucewoods9377 6 ай бұрын

I have a Violeworks A5 M50 which would appear to be a clone of the Atomstack version. But then I wonder who did Atomstack clone theirs from?

@CasualDIY 6 ай бұрын

These types of lasers are all very similar to each other

@RebelzoneGraphics Жыл бұрын

I love my a5 pro

@billkeogh1591 Жыл бұрын

I would like to buy this laser from Atomstack but they only have the EU plug in and I am in Canada. Any idea what is required to use the EU plug here in Canada?

@CasualDIY Жыл бұрын

No idea what plugs you got in Canada unfortunately

@monicab28 7 ай бұрын

Can you engrave tumblers on this!

@CasualDIY 7 ай бұрын

To be honest I can't remember if there is a rotary accessory for it, you would have to check on their website

@walick97 11 ай бұрын

Where can I get test file for speed and power ? Thanks for answer😊

@CasualDIY 11 ай бұрын

I made them myself, they are for LaserRGBL. If you want them just drop me an email casualdiyuk@gmail.com

@seanmaloney8313 Жыл бұрын

How long did it take to etch the graphic mate?

@CasualDIY Жыл бұрын

about 15 minutes

@doman90 Жыл бұрын

To czemu moj egzemplarz sklejke 3mm przepala dopiero przy okolo 80% 150mm/s ale na dwa razy? Cos zle robie?

@CasualDIY Жыл бұрын

Ja przeważnie używam sklejki do laserów a nie zwykłej. Nie jest tak gęsta. Zależy od sklejki czy nawet drewna. Sosnę przetnie bez problemu ale z twardym dębem może byc różnie- ot taki przykład

@boballen2350 Жыл бұрын

Anybody any experience of using the buying link to ship to the UK? Any extra charges from VAT and import duties for example. Any help appreciated.

@CasualDIY Жыл бұрын

You will get the customs fee unfortunately.

@boballen2350 Жыл бұрын

@@CasualDIY Thanks for the info.

@menstuffbylaki5923 5 ай бұрын

Hello, is it possible to engrave brass with atomstack a5 pro? And how to set the settings

@CasualDIY 5 ай бұрын

I don't think it's possible. You would need a red dot laser (infrared) for that.

@menstuffbylaki5923 5 ай бұрын

@@CasualDIY there is an option for stainless steel, so I thought it would need power and brass

@CasualDIY 5 ай бұрын

@@menstuffbylaki5923 stainless steel and brass totally different things unfortunately

@tinashechikore8154 Жыл бұрын

Hi, can i cut glitter cardstock? and can this machine burn it

@CasualDIY Жыл бұрын

If you set it up incorrectly to the material then yes it will burn it. It will cut through cardstock not sure about glitter tho

@JonasN-dk5ur Жыл бұрын

Can this engrave clear organic glass! where you can find various examples for tests😉

@CasualDIY Жыл бұрын

Not sure if the 5w module would do it 🤔 not tried myself

@jannis01 Жыл бұрын

Very cool i might need one too haha

@user-dg9iq3gq8q 11 ай бұрын

I have no idea how to apply the pictures any help ?

@CasualDIY 11 ай бұрын

What do you mean by "apply pictures' ?

@klimek23 Жыл бұрын

Is this a C02 laser or a fiber laser? And why does this matter? Thanks!

@CasualDIY Жыл бұрын

It's a diode laser. CO2 lasers are a totally different type of machine, they are more powerful ie they can cut thicker materials a little quicker but they are much more expensive than the diode lasers.

@kumar11141 3 ай бұрын

I recently purchased A5 Pro but when i press home button in GRBL and Light Burn it goes to end start grinding. I don't know why i setup 410 and 400 . Can u help me.?

@CasualDIY 3 ай бұрын

In both softwares you need to setup home position. This machine as far as I remember doesn't have limit switches.

@georgemcaldeira5632 4 ай бұрын

What about cutting plastic? I've heard the AtomStack A5 Pro is capable, but a video would be great.

@CasualDIY 4 ай бұрын

Define plastic 😅 it will cut through 3mm black acrylic

@georgemcaldeira5632 4 ай бұрын

@@CasualDIY ABS plastic

@CasualDIY 3 ай бұрын

@@georgemcaldeira5632not tried abs

@judithrangga Жыл бұрын

I bought that but it’s not cutting through. If you please guide me the settings also can you share the test files for engravings and cutting. I will be appreciating. Thanks.

@CasualDIY Жыл бұрын

First of all what do you want to cut and which power module did you get?

@judithrangga Жыл бұрын

@@CasualDIY I bought atomstack A5 40 watts. I am using the grbl but not much results comes than I use lightburn in that I can set the power option which engravings is ok but cutting is not go through. Please guide me how to set up the program. I try to cut cardboard and 2mm plywood.

@CasualDIY Жыл бұрын

@@judithrangga I think you got the Atomstack A5 40W ( that's just the name of it not indicating power watts) which cones with 5 watt module. Have you set up the focal point of the laser correctly? If you trying to cut something try 100 mm/min and 100% power( in lasergrbl you need to set up 1000 in the power field as that will give you 100% power) is the file vector? Does it have clear thin cutting lines?

@judithrangga Жыл бұрын

@@CasualDIYcan I email you the details if can guide me

@briannamohabir461 9 ай бұрын

Does this laser have Bluetooth ability? Also, do you recommend this one for beginners with no experience?

@CasualDIY 9 ай бұрын

It doesn't support Bluetooth. This is a cheap basic laser. It will be fine to start of you adventure with lasers. But there are better machines that easier to put together and easy to operate. However they will cost a lot more. This laser is more for engraving, if you want to cut material then I would suggest a stronger module. All depends what projects you want to tackle.

@Vertim87 Жыл бұрын

Whats laptop will be enought for use software?

@CasualDIY Жыл бұрын

Any correctly sold laptop will run it. But if you got to the website of the software then I'm sure they will have the minimum specs.

@Vertim87 Жыл бұрын

Thanks Man :)

@stroke-tastic Жыл бұрын

oes it cut circles and shapes?

@CasualDIY Жыл бұрын

Whatever you will design it will cut

@mrbeasley5386 Жыл бұрын

Hi great video, how powerful a laptop do you need to use this atomstack

@CasualDIY Жыл бұрын

Very basic one will do👍

@pawes4976 Жыл бұрын

Orientujesz się może czy faktycznie ten Atomstack nie ma wymiennych soczewek i przy uszkodzeniu pozostaje wymiana całego sprzętu?

@CasualDIY Жыл бұрын

Szczerze mówiąc nie mam pojęcia, podejrzewam że trzeba wymienić caly moduł

@pawes4976 Жыл бұрын

@@CasualDIY Dziękuję za odpowiedź :) Może jesteś w stanie polecić grawerkę w podobnej cenie, którą warto kupić a z częściami nie będzie problemu? Chodzi wyłącznie o grawerowanie, od cięcia mam inny laser.

@CasualDIY Жыл бұрын

@@pawes4976 dość popularna jest Ortur Master 2pro i jeśli do grawerki to 5w starczy choć 10w jest wiadomo wydajniejsza

@-KapacMo 9 ай бұрын

Sculpfun S10, S30...

@Garylivingstone Жыл бұрын

Can the software be run off an android tablet or Amazon fire tablet

@mysticabbagerealm Жыл бұрын

There is an app on play store Gary 👍

@CasualDIY Жыл бұрын

Not to my knowledge, it only has a usb cable connection

@Garylivingstone Жыл бұрын

@@mysticabbagerealm many thanks

@user-vg1gk9gz2g 3 ай бұрын

Which software do you have

@CasualDIY 3 ай бұрын

I used to use LaserRGBL but now I use Lightburn

@LabLyfeTimbo Жыл бұрын

Can this engrave plexiglass

@CasualDIY Жыл бұрын

Yes it can

@amberj5274 Жыл бұрын

Did you get the machine to actually home? I've been trying and can't figure it out

@CasualDIY Жыл бұрын

Sorry not sure what you mean, I got it in my workshop. If you don't have an enclousure with extraction then it needs to be in a well ventilated room. It will create a lot of fumes. These could cause fire as well so need to be careful as how and where you will use it.

@amberj5274 Жыл бұрын

@@CasualDIY home meaning using the homing button

@CasualDIY Жыл бұрын

@@amberj5274 oh sorry, yes you set up your homing point in the software and it will return to that spot when you use the home button in the software

@amberj5274 Жыл бұрын

@@CasualDIY do you have a video for that? Or can you lead me in the right direction where I can learn please

@CasualDIY Жыл бұрын

@@amberj5274 I don't have a video but it's super simple, I'm using LaserRGBL free software. So move the laser head where you want it and in the software there is a button that will set that position as home. That's it.

@06_farhanhakimulfadhli82 24 күн бұрын

What wood you use?

@CasualDIY 24 күн бұрын

Plywood

@ahmadkazim7399 4 ай бұрын

Which software are you using?

@CasualDIY 4 ай бұрын

I was using LaserRGBL but now I'm using Lightburn

@briannatheriot9916 3 ай бұрын

What software are you using for designs?

@CasualDIY 3 ай бұрын

I'm using Inkscape, Lightburn, Sketchup, Photopea. Depending on the project

@briannatheriot9916 3 ай бұрын

@@CasualDIY thank you

@s7Films Жыл бұрын

Any experience cutting through leather?

@CasualDIY Жыл бұрын

Yes but with 10W module on different laser

@s7Films Жыл бұрын

@@CasualDIYyou haven’t tried cutting through leather with the A5 Pro 5W laser module, though?

@CasualDIY Жыл бұрын

@@s7Films no, just engraving

@jimaspinii7579 Жыл бұрын

The link takes me to a 40w machine. ?

@CasualDIY Жыл бұрын

That's the whole name of the Laser. Atomstack A5 Pro+ 40W It's has a laser module of 5W

@jimaspinii7579 Жыл бұрын

Wow…I have MUCH to learn. I am SO confused. 🤪

@CasualDIY Жыл бұрын

@@jimaspinii7579 Well they don't make it easy or obvious when they name their products

@AdiSusanto-kp9os Жыл бұрын

which one is better Atomstack A5 pro or Ortur Master 2 pro ?

@CasualDIY Жыл бұрын

I got the Master 2 Pro and if we consider that vs the Atomstack A5 Pro then I think I would go for the Ortur.

@AdiSusanto-kp9os Жыл бұрын

@@CasualDIY if ortur s2 pro with two trees tts-55?

@CasualDIY Жыл бұрын

@@AdiSusanto-kp9os not used the tts-55 so I can't say

@AdiSusanto-kp9os Жыл бұрын

@@CasualDIY oke thankyou sir ,your channel is very helpful

@Boogiebanks303 Жыл бұрын

Does it cut glass ?

@CasualDIY Жыл бұрын

No it does not to my knowledge

@zombieprinting2670 Жыл бұрын

Yeah, nice machine but not additional 700$ shipping nice. !!!

@sethcarson5212 10 ай бұрын

Hey, I just got this same laser and downloaded Lasergrbl. I dont know what i did but it wont engrave my stainless. I though maybe wrong kind of stainless but it wont even do wood on these settings. Somthing is wrong. anyone have any advice? ive never used this program before so im sure its user error.

@CasualDIY 10 ай бұрын

Is the laser actually connected to the software? Can you operate the laser through the software?

@sethcarson5212 10 ай бұрын

@@CasualDIY yes. When I first plugged it in I just ran thru on defaults and it worked great on the wood. Almost too great, just about cut it. Then I fiddled with something and now it won't even engrave balsa wood. Is there any way to rest it to factory default? I tried uninstall and reinstall but all the settings were as I'd left them.

@sethcarson5212 10 ай бұрын

@@CasualDIY and it still goes thru the motions like it's doing it but nothing happens.

@CasualDIY 10 ай бұрын

@@sethcarson5212 there are some KZfaq video tutorials on how to use lasergrbl I think that would be the best starting point as it is very hard to suggest anything without seeing all the settings you have

@sethcarson5212 10 ай бұрын

@@CasualDIY are there any in particular you recommend?

@casper1240 Жыл бұрын

would have been even better if you showed us how to copy Photos thanks

@CasualDIY Жыл бұрын

Sorry what do you mean copy photos? Do you mean engrave photos? If so what specifically would you like to know? I could make a video on that in the near future.

@casper1240 Жыл бұрын

@@CasualDIY Im new to all this sorry i dont even know how to engrave a photo from my Photograph library ,im also having trouble engraving a few words for a project im making as i said im a complete newbie and the wrong side of 70 thanks would be appreciated

@CasualDIY Жыл бұрын

@@casper1240 I'll try to make a video on this for next week or week after 👍

@casper1240 Жыл бұрын

@@CasualDIY Cheers

@abdulghaniahmedal-ameri3064 9 ай бұрын

Does it print arabic language

@CasualDIY 9 ай бұрын

It doesn't print, it engraves. It will engrave anything you put in the software

@MrJaxparadize 4 ай бұрын

Mine won’t do metal. I have the exact same machine. Won’t do it even though it has the settings for it. Yes, I did everything that youre supposed to. Even followed this cars settings at 350mm at 100% power. Nada. Aluminum. Can’t engrave.

@CasualDIY 4 ай бұрын

It doesn't engrave aluminium, it will engrave stainless steel and steel. It also won't engrave brass, copper, silver, gold etc for those you need a red dot, infrared laser

@pamcuster9341 Жыл бұрын

I can’t get my laser to cut anything like these settings. I can barley get it to cut thru 3mm

@CasualDIY Жыл бұрын

All depends what material ate you trying to cut. You will struggle with dense hardwood plywood and a 5W module. Low grade softwood ply will cut easily. You can buy plywood that is dedicated for laser cutting, it's less dense. Same where it comes to cutting wood. If you try to cut pine then you will have no issues however if you try to cut dense hardwood like oak you will struggle. If you bought a laser for cutting mainly then 5W will not be as good and efficient as 10W.