This is different kind of laser. It’s made for smaller projects, but also for high speed accurate and repetitive work. I show examples of this in the video.
It has a small footprint on your desk or crafting table, at just under 12x8 inches.
It can be detached from the base and used in handheld mode. This can work great as long as the M4 is held perfectly still while engraving… any movement will cause a defect in the engraving.
It comes with free software called SeaCAD… and though the enclosed manual walks you through a few basic settings, this is a program (for a novice like me) that has a somewhat steep learning curve.
The focusing process is to overlap the two red lights using the height adjustment knob. Easy to do, but you must be precise, or the engraving might be heavier and lighter in areas of the same project, or not show up at all. I actually had to adjust the beam manually at one point, by taking off the protective housing and loosening a few bolts to re-align the focusing beam projector. Not difficult at all, but worth mentioning here.
TRANSAPENCY: I am not affiliated with Atomstack on this project, but Atomstack sent me this machine free of charge, with the ask of doing an honest review video and presenting it to you. That is exactly what I’ve done here. If nothing else, I want to help you make an informed decision.
I will not make any kickback from use of this link or code... but it's a great sale in my opinion, as this engraving machine is not inexpensive.
Here is the link and discount code:
ATOMSTACK M4 Fiber Laser
Product link: amzn.to/3Ul8Qrg
Original Price: $1,699.99
Promo Price: $1,274.99 (25% off)
Take a look:
www.zbanx.com/
In a nutshell, my honest opinion after testing this machine:
I see the huge potential with this machine, specifically it’s like having your own fast production line for small engraving, on your desk. From jewelry to ID tags, tools, and many other items, set the program and use the guide plate, and push the button without going back to the computer.
I also see this being in need of just a bit of refinement. Specifically, the focus can be a bit tricky, as stated above, and the Marking cover needs updating with a non-slip edge and a tighter fit to the lens housing…or a tightening screw or two.
The price point is high, so you’ll want to take advantage of any sale if this is a machine you are interested in.
I’ll be using it. If I had the budget, I’d want this, but I would not go in debt to make this purchase.
ATOMSTACK M4
ATOMSTACK M4 Fiber Laser Engraver
Product model: ATOMSTACK M4
Engraving size: 70*70mm/2.75*2.75"
Whole machine power: 20W
Pulse peak optical power: 20000W
Engraving accuracy: ≤0.01mm
Marking repetition accuracy: ≤0.01mm
Marking speed: 12m/s
Laser life: ≥20000h
Operating software: SeaCAD5.1 (free), supports Windows XP, Windows VISTA, Windows 2003, Windows 7, Windows 10, Windows 11 systems
Supported file formats: support PLT, DXF, BMP, JPG, JPEG and other image files; support Code39, EAN, PDF417, DM and other 1D barcodes and 2D barcodes; support marking dynamic files
Data transfer method: USB connection
Power supply: International standard power supply Input: 100-240V AC, 50/60Hz Output: 12V 8A
•Adopts industrial galvanometer technology, the marking speed of ATOMSTACK M4 fiber laser engraver is greatly improves to 12000mm/s, 5 times faster than blue light marking machines. With upgraded compressed spot technology, the minimum markable character is about 0.06mm*0.15mm (tested with focusing film). The 0.01-0.02mm ultra-long and ultra-fine infrared laser can perfectly present 4K-level high pixels.
•supports handheld laser marking. Equipped with a handle and built-in TF card, the 2.8kg engraving head can be easily held to mark on non-horizontal surfaces, walls and facades, getting rid of the shackles of computer and desktop. The 1064nm wavelength cold red-light laser is safer than other 450 blue light laser and will not burn human body.
•has a full-metal sturdy structure. In 70x70mm engraving area, it adopts double red-light positioning to accurately locate the marking position without offset. The one-key marking function can repeat the work with one click and easily complete batch customization work without computer operation. The reserved window at the bottom makes it support up to 96mm height item engraving.
• can engrave common metals and alloys, rare metals and alloys, metal oxides, special surface treatment, ABS material, ink, epoxy resin, Leather, wood (lacquered), ceramic (lacquered), stone, etc. It is ideal for both people and factory which runs engraving and marking business and people who enjoys the fun of engraving.
Thanks for watching
contact me:
rhumphrey.wookworking@gmail.com
or:
Rod Humphrey
PO Box 159
Chesterfield, IN 46017