Atomstack Y-axis rotary roller for laser engraving of cylindrical objects

Рет қаралды 52,401

Күн бұрын

Atomstack R3 Rotary Roller Y axis for Laser Engraving Machine is designed to be compatible with many other laser engraver brands too. Unlike many other similar products, this one can accept longer cylindrical objects for engraving. Minimal diameter of the object is approx 5-6 mm (tested). It doesn't require any changes in the software, installed stepper motor is replacing the linear Y axis of the laser engraver.
Banggood affiliate link: www.banggood.com/custlink/GD3...
Atomstack A5 from the video: www.banggood.com/custlink/Dvv...
All Atomstack products: www.banggood.com/custlink/GmD...
List of all engraving videos on this channel:
www.mytechfun.com/videos/lase...
If you like my work and you would like to make a donation:
www.mytechfun.com/donation
Contents:
0:00 Introduction
0:48 Unboxing
2:11 Assembling
3:23 Min/Max diameters
4:17 Engraving on cardboard (up-side down)
6:04 Engraving long cylinder
6:55 Engraving on wood
9:08 Engraving on aluminum can
9:34 Engraving small diameter object
10:10 Final thoughts
#atomstack #laserengraving #laserengraver

Пікірлер: 37

@rondoring4964 Жыл бұрын

Just what I needed to know, and extremely well presented! Thank you sooo much!

@timothydaniel4511 2 жыл бұрын

Another great review, keep it up please!

@dragonflymadfw Жыл бұрын

Thank you for the great tutorial

@adrianaguilar3343 Жыл бұрын

le agrdesco mucho me has salvado la vida tenia un problema y gracias a este video se soluciono grax

@kanito107 Жыл бұрын

Is this rotary compatible with ortur lasers?

@celorenzo 11 ай бұрын

Does anybody know if this will work on the Enjoywood CEL-E10? Thanks

@nickromanek9444 Жыл бұрын

Can this laser be used for tublers?

@fernandaestefaniabazalduac501 9 ай бұрын

Hola, espero puedan ayudarme: apenas estoy comenzando con una cnc y he grabado en un termo pero no me dan las medadias, ¿Alguien sabe a que se debe?

@TomasQ 2 жыл бұрын

any idea why mine moves on the Y while using roller? New to this buy I'm pretty sure it should only move on X

@MyTechFun 2 жыл бұрын

It replace the linear stepper motor of the engraver. If you pull out the Y stepper cable and connect it to roller, it will rotate in "Y direction"

@luisfeliperosas9721 5 ай бұрын

Works in Sculpfun s30?

@tswvlor9877 Жыл бұрын

What software do you use to engrave that? I am using my iPhone with AtomStack engrave, but it doesn't give me any choice other than wood/plywood. Thanks!

@mikethompson9745 Жыл бұрын

He is using LaserGRBL Oh his computer, So do I its free

@tswvlor9877 Жыл бұрын

@@mikethompson9745 Thanks a bunch.

@kukiatkhamkhaw6046 Жыл бұрын

is your machine Atomstack A5?

@bobsyouruncle8052 2 жыл бұрын

how to use text with laser grbl

@gregeastman6662 Жыл бұрын

its way over $1,000.00 US its way more then i can buy, great video

@MyTechFun Жыл бұрын

$1000? No, one zero less

@ProfessorOfEconomics Жыл бұрын

Have you tried Atomstack x20 20 watt yet? I am thinking about buying it.

@MyTechFun Жыл бұрын

Not yet, 10W strongest I tested so far.

@RCREVIEWS101 Жыл бұрын

I go tit ...and returned. Too much hyper from youtubers that got then for free in turn of a false good review. It is just very slow and underpowered for the said 20W, just overpriced toy

@julisafigueroacanahuire7059 Жыл бұрын

help!, I have the atomstack a7 pro, in the last seconds it goes fast, in the last pass it records in a different position (2mm beyond), can you give your email to send a video to show this problems please. many thanks

@Laceyface5000 7 ай бұрын

I have this same problem. Did you ever find a resolution?

@Monztuh Жыл бұрын

So how would I move my axis if the rotary tool is active since it replaces an axis motor?

@MyTechFun Жыл бұрын

The signal to Y axis will move the motor on the rotary roller.

@Monztuh Жыл бұрын

@@MyTechFun yea I figured it out after I put it together thanks though!

@MrJolivareyes 2 жыл бұрын

HELPPPPPP I have one and I have been trying to make it work and every time the roller wont spin, It sound like it is stuck. Im so frustrated that I dont know what else to do.

@MyTechFun 2 жыл бұрын

First of all, can you rotate it with your hands? Second, is to check if you used correct cable (black or white, mentined in the video)

@MrJolivareyes 2 жыл бұрын

@@MyTechFun i can rotate it with my hand. I have use both cables. Nothing is working

@garyhamon150 2 жыл бұрын

It absolutely doesn't work with the frame on the Atomstack X7. There's nowhere to securely attach the fourth riser on the corner with the control box

@MyTechFun 2 жыл бұрын

Sounds like great DIY project, I am sure it can be solved easily

@HuntersOA 2 жыл бұрын

I wonder if this would work with a K40...

@MyTechFun 2 жыл бұрын

Depend of the stepper motors. This one has Nema17 inside. If necessary (depend of the pulleys) change the e-steps if possible (the expression is from 3D printing, not sure how are they called on laser engravers)

@HuntersOA 2 жыл бұрын

@@MyTechFun I guess so - but I am unsure about the magic firmware it has. I am fairly OK with 3D printer firmware but I'll have to look into how it looks for the K40

@CrystalDehner-xm5rb 8 ай бұрын

Mine is etching mirrored! 😢😢😢

@NicksStuff 2 жыл бұрын

It's 50% of the price of the laser engraver, though

@MyTechFun 2 жыл бұрын

Not always 50%, depend of the engraver (there are some expensive versions too). Looks like these products are in similar price range, there are some DIY solutions, they are cheaper ONLY if you don't calculate your time working on it...