ORTUR Rotary Roller Setup....STEP by STEP....

Рет қаралды 56,569

Жыл бұрын

‪@ORTUROFFICIAL‬
‪@lightburnsoftware7189‬
MADE THE BEST: www.madethebest.com/?aff=181
This is an introduction video to the ORTUR Rotary Roller. Made the Best was nice enough to send us the new Ortur Laser Master 2 S2 along with some accessories. They also sent us a rotary roller, air assist pump, and a honeycomb laser bed. There will be affiliate links below for everything in the video.
This is a great route to take to get started in the CNC market. This machine can do more than I can imagine. This video will cover the LightBurn software and testing the laser out. Feel free to leave any feedback or questions in the comments.
Don't forget to SUBSCRIBE and check out the product links.......
MADE THE BEST AFFILIATE LINKS:
Ortur Laer Master3: www.madethebest.com/collectio...
Ortur Laser Master 2 S2: www.madethebest.com/collectio...
Rotary Roller:bit.ly/38xXa2H
Air Assist Pump:bit.ly/3wY64jl
Honeycomb Laser Bed:bit.ly/3Q2KNwu
Laser head focusing controller:bit.ly/3x19Gkv
AMAZON AFFILIATE LINKS:
Ortur Laser Master 2 S2:amzn.to/3xUJPdl
Air assist pump:amzn.to/3nixhHQ
micrometer:amzn.to/3NmUK52
Rotary Roller: amzn.to/3QmIeGd
Ortur KZfaq page:
/ @orturofficial
Lightburn KZfaq page:
/ @lightburnsoftware7189

Пікірлер: 125

@everythingcrafty4693 10 күн бұрын

Finally 🎉 great instructions

@chucklenz9011 6 ай бұрын

That’s your wife? WOW! And she drinks beer. Double WOW!

@SpicerDesignsLLC 6 ай бұрын

Yea sir! Im a lucky man. She loves sports too.

@michellejarnutowski1636 4 ай бұрын

What am i doing wrong if my laser imprint is blurry/doubled?@@SpicerDesignsLLC

@pfiltz Жыл бұрын

Probably one of the best explanations of setting up a rotary I've seen by far. Excellent Video. Thumbs up. I have a Co2 laser and I'm wading into tumblers this week. I have a 4 wheel rotary attachment. The section on setting up LB was great to see and hear.

@thedadchronicles 2 ай бұрын

You earned my sub, thank you for not taking this shit so serious.

@SpicerDesignsLLC 2 ай бұрын

Thank you. We try to keep it fun

@Group-Five-Industries Жыл бұрын

Great instruction, Fun, informative content!!

@bsr8129 Жыл бұрын

Came.for some.medicore tatas and didnt disappoint

@joaomavura3049 6 ай бұрын

Tnks for the vídeo❤

@jasongrinnell1986 Жыл бұрын

Lol! That was challenging. Watching the keystone girl and laser printing at the same time. That was awesome, thanks for posting.

@SpicerDesignsLLC Жыл бұрын

Hah. Glad you enjoyed it. Thanks for the comment!

@schmidtyyt Жыл бұрын

Micrometer is not a general term. It is a specific measuring tool. That seller is putting related but not accurate terms in it's description to get more search hits. It not only is not a micrometer, it's also not a Vernier caliper. *jumps back into awesome video

@schmidtyyt Жыл бұрын

Now you have me wanting to buy one of these, too! I got that Vevor TIG welder and really like it so far. Thanks for the informative videos, Kyle!

@SpicerDesignsLLC Жыл бұрын

@@schmidtyyt this micrometer thing is killing me. Hah. Glad you enjoyed the video. That vevor tig welder is pretty nice for the price.

@15belany Жыл бұрын

First good use I’ve ever seen for a Keystone Light! 😂 Oh, great video and instructions.

@SpicerDesignsLLC Жыл бұрын

Glad you enjoyed it. Thanks for the comment!

@joea361 7 ай бұрын

I have this exact machine, except a 10w module. Just got the rotary attatchment. Very good explination and tutorial! Thanks!

@SpicerDesignsLLC 7 ай бұрын

Thanks! I have the LM3 too. Just did a review on the new XTool S1 if you havent seen it yet

@knightcrafted7 Жыл бұрын

watching this for the 3rd time ... thanks for the video bud. I think my laser sucks and light burn is pretty cool

@fiefiebezuidenhout815 8 ай бұрын

I burned one tumblet on your settings and it worked great. Now when going back the same file my logo is compressed. Any idea what the cause may be 😢

@SpicerDesignsLLC 8 ай бұрын

Well thats good and bad. Did the settings not hold?

@fiefiebezuidenhout815 8 ай бұрын

@@SpicerDesignsLLC checked the settings and was still the same

@SpicerDesignsLLC 8 ай бұрын

@@fiefiebezuidenhout815 im not sure. Id have to mess with it. Sorry i cant give you a definite answer

@fiefiebezuidenhout815 8 ай бұрын

@@SpicerDesignsLLC thanks anyway. Will try and see if I can get something figured out. 😉

@billg1871 Жыл бұрын

Another great video- love the dynamic, great overview without so much detail it becomes overwhelming. About a month into my CNC plasma, so transitioning into a rotary axis won't be difficult. KG is such a good sport, made me laugh out loud a few times :) Don't worry about the haters- keep doing the things that make your life fun and interesting! oh, and engraving a business card- great idea- didn't know you could do them..err those.. that.. :)

@SpicerDesignsLLC Жыл бұрын

Thanks Bill. I appreciate the nice comment. Majority of the feedback we get is positive. We enjoy making these videos together. Good luck with all your CNC work.

@user-nz6uv2lg4l 5 ай бұрын

lol I really enjoyed it...rock on

@User-sssss-543 Жыл бұрын

I like the channel!

@kiotimike Жыл бұрын

Hey did anyone else go cross eyed with that split screen? Lol Also I can't be the only one that had to pause, to see the business card that was strategically placed on keystone girl. Kyle you're smart and crafty guy. Bring on the kioti mods lol Cheers happy new years.

@SpicerDesignsLLC Жыл бұрын

Thanks buddy. Always look forward to your comments

@PurpleCollarLife Жыл бұрын

Cool!

@BoHemathTN 9 ай бұрын

Can you do a video on how to set the laser numbers and which program you recommend? Thanks and your videos help getting this process started. 🎉

@SpicerDesignsLLC 9 ай бұрын

I do have some other videos where i talk about the software. I also have download links in the description.

@thefeet 4 ай бұрын

Sub earned!

@SpicerDesignsLLC 4 ай бұрын

Thank you!

@kenh8979 Жыл бұрын

Good video and thank you and your lovely wife for the video. Good talk thru and demonstration. One small point, the number that goes into the Rotary Axis mm per rotation box. That really seems to be a random number that's obtained by trial 'n error as you show. There MUST be some relation between the roller diameter, and cup diameter. Sure would be nice to have that formula, even if only to get close. Again, thank you. With your video I was able to engrave my first cup.

@SpicerDesignsLLC Жыл бұрын

Thanks Ken. Glad it was helpful for you. I agree with you on that number. Im still learning on these engravers. I mostly do metal works with the cnc plasma cutter. If i find a better formula i will be sure to share it.

@davey3765 Жыл бұрын

automatic thumbs up for using keystones for machine feet! When etching I found with 10w lasers 180LPI (lines per inch) to be the sweet spot; balance of resolution and speed. Using the Longer RAY5 10w about 3000 mmMin / 42-60% power works best.Going higher power or higher resolution turns the metal multon and forms beads around text and so forth, granted your not pushing your speed to crazy numbers like 10,000 mm Min.

@SpicerDesignsLLC Жыл бұрын

Thanks for the pointers! Im still learning with these engravers.

@lonewolfFirearms Жыл бұрын

Words I live by "I hear you and I don't give a fuck" keep up the great videos.

@SpicerDesignsLLC Жыл бұрын

Hah. Hopefully people understand my sense of humor.

@schmidtyyt Жыл бұрын

@@SpicerDesignsLLC If they don't, fuck em'! 😉

@SpicerDesignsLLC Жыл бұрын

@@schmidtyyt hah. Thats right!

@busisiwephakathi7793 5 ай бұрын

thank you for this video. I have the same laser and the rotary I got is the ortur chuck. your video is the only one that was straight to the point and fun to watch. I have my laser elongated using bricks and old hardcover textbooks lol. I have not used lightburn as yet, I use lasergrbl so I will see how it turns out. Will have to search other video that use lasergrbl. thanks a mill

@SpicerDesignsLLC 5 ай бұрын

No problem! Glad it was helpful for you and good luck with your rotary project. I appreciate the comment.

@Sartek 11 ай бұрын

I'm pretty sure the people that wrote the manual cant even pronounce Keystone Light :D

@SpicerDesignsLLC 11 ай бұрын

Hah. I going to have to agree with you on that one.

@David.C.Velasquez Жыл бұрын

Awesome channel! imho, you used all assets at hand very well indeed. Subbed fo sho

@markatkins4246 Жыл бұрын

Can you do a video on calibrating the Yrc chuck?

@SpicerDesignsLLC Жыл бұрын

I dont have the chuck. But i can talk to Ortur and see if they will send one out. Were in the process of a big move right now so it might be a bit before i get to it.

@markatkins4246 Жыл бұрын

@@SpicerDesignsLLC I Am new to all at this....I m retired now and Im going for it...

@markatkins4246 Жыл бұрын

Im having a problem it says No connectivity, Ive changed cables and all that... is GRBL Compatable with Mac's? thats The message Im getting!

@BigBaldFella Жыл бұрын

while engraving, your markings looked black. What did you clean them with to get rid of that?

@SpicerDesignsLLC Жыл бұрын

I just wiped it with some cleaner. Its just a charring from the laser.

@Biomedtech03 Жыл бұрын

great video.. do you now if the same setup is true for the LM 3 and the YRR 3.0 rotary?

@SpicerDesignsLLC Жыл бұрын

Im not sure. I have a lm3 i still have to do a review on. I was going to use that same roller with it.

@poti2875 7 ай бұрын

nice tutorial vid.. btw, after determining the mm per rotation, does it mean im not gonna change it anymore? or do i need to change it again depending on the diameter of the diameter im gonna engrave?

@SpicerDesignsLLC 7 ай бұрын

Its been a little while since ive used the rotary tool. The measurement for the rotary rollers should stay the same

@poti2875 7 ай бұрын

@@SpicerDesignsLLC ohh.. so no need to change the mm per rotation anymore even if the diameter of the item becomes smaller or larger?

@SpicerDesignsLLC 7 ай бұрын

@@poti2875 yes that one will change. Sorry i wasnt clear. Just the roller measurement on the tool stays the same.

@adampittman1624 Жыл бұрын

That is great I need to get me one of those. The engraving thing was ok too lol

@SpicerDesignsLLC Жыл бұрын

Hah. Ya theyre hard to find. Thanks for watching!

@adampittman1624 Жыл бұрын

Haha I believe that heck Man U could b doin a video bout just bout nethin n u two could make it interesting lol

@IndyFarmLife Жыл бұрын

That's a pretty cool setup. I assume once you have it setup you could batch produce a number of items? Could be a nice little side hustle for some local businesses/merch. What I really want to see is how powerful that laser is. Put a Keystone can on the roller and let it go until the laser punches a hole in it!

@SpicerDesignsLLC Жыл бұрын

I can try that. They are sending a more powerful laser in a couple days. Going to cut some leather too.

@IndyFarmLife Жыл бұрын

@@SpicerDesignsLLC Nice! Can I convince you to use a full can vs empty? ha

@nuxboxen Жыл бұрын

lmao, great video

@MikeRenshaw-cp9ds Жыл бұрын

Was a great video to watch, finally someone getting to the point instead of the usual rambling. anyway, I followed your instruction but had to shut it down for the night, came back to it the next day and lightburn keeps giving me a pop up saying it cannot connect to com 3. When i hit the fire button it gives me a code "error:9 G-code locked out during alarm or jog state." I cannot do anything with the program including putting it back to regular flat burning. I also cannot save the changes you mentioned in lightburn itself. Same thing in Laser GRBL, "access to com 3 is denied" anything you can tell me to help out would be great.

@SpicerDesignsLLC Жыл бұрын

Sorry your having issues with the program. Im not that well versed with lightburn. I think ive seen that error before but i cant remember how i got through it. Sorry i cant help you with that one.

@OneEyeCustoms Жыл бұрын

That is very cool, but how in the heck did you learn to run that and all the info you needed to program in? Keep the mic on her!

@SpicerDesignsLLC Жыл бұрын

Mostly other KZfaq videos and its pretty similar to the CNC plasma table. Its really not too bad.

@sirsparkalot2661 5 ай бұрын

This video is dummy proof!!! Thanks. One question though. I know when engraving on a flat surface, you use the cyndrilical fixture to set your focus. How do you adjust the focus when engraving a tumbler? Use the same fixture? Just curious about that process. Thanks muy mucho!!!

@SpicerDesignsLLC 5 ай бұрын

You would get your cylinder in place and set the focus on the highest point where the engraving is happening. Hopefully that answers your question

@sirsparkalot2661 5 ай бұрын

Again. You made this to where even a Marine could understand it. Thanks again.

@SpicerDesignsLLC 5 ай бұрын

@@sirsparkalot2661 glad it was helpful and thanks for your service

@sammysahn6065 Жыл бұрын

Did you change the laser head? you mentioned its a 10w laser, i bought one but i dont think it can do metal?

@intjonmiller 9 ай бұрын

It's just removing the powder coating. It isn't affecting the metal itself.

@johnguynn5213 3 ай бұрын

how to set the center for the roller to engrave

@gdubbswilson6207 7 ай бұрын

do you have a video for the rotary chuck my laser is not engraving

@SpicerDesignsLLC 7 ай бұрын

I dont on the rotary chuck. No experience with thats rotary tool. Sorry im no help there.

@briannawilson8438 6 ай бұрын

I use the "Longer" products and I'm watching your video as I'm playing with my new Longer toy. As I'm playing around with this new rotary to see how it works, I manually move the rollers with a pint glass resting on it and the glass is moving around on the rotary! WHAT in Gods name do I have to do to stop this mayhem!? Do you have a video about keeping your darn material in place!?

@SpicerDesignsLLC 6 ай бұрын

The rotary setups are kind of a pain. If the glass is not a perfect cylinder youll have to lift the one end to get it level. Not sure if thats the issue your having.

@TimberWood.Customs 5 ай бұрын

Thx for the video. But my glass keeps sliding off the little wheels that holds it at an angle. And eve try time it rotates, the glass slides. How do I prevent that?

@SpicerDesignsLLC 5 ай бұрын

Hard to say without seeing the setup. Sometimes you have to get a little creative to get it to rotate correctly

@TimberWood.Customs 5 ай бұрын

@@SpicerDesignsLLC okay I got it to stop slipping, but now my design is coming out crooked… no matter how many times I change the position on the rotary, it never seems to be straight. Any tips on how to get it to be lined up with the laser?

@dereksellars Жыл бұрын

Wow! That's cool!! Just wondering how easy it is on, say a laptop cover or a leather briefcase? What kinds of materials can you engrave on? Love your channel. Look forward to more videos,

@SpicerDesignsLLC Жыл бұрын

Im going to try leather in a week or two. If you decide to get one i would look at something with a little more power. 10 watt seems light duty. Glad your enjoying the channel. I try to keep it as entertaining as i can.

@gregmiller1663 Ай бұрын

Will it also work with Miller Lite cans? Have you done anymore to see if you can speed up the engraving? 80 minutes for one tumbler is a lot, but I get it with this laser. I just ordered a LM2 Pro S2 but if I have an order for 20 that could take a while.

@ewaserpas6697 Жыл бұрын

What power did you set for your test line?

@SpicerDesignsLLC Жыл бұрын

I think it was 10 or 15%. Just enough to see it. I would def start low. It cuts through the tape pretty easy. Thanks for watching!

@jtcard4369 4 ай бұрын

Great video and explanation! Also enjoyed the humor 😅 For some reason my thermos keeps creeping forward when the rollers engage. Any idea why and how to stop that? Thanks for the great content!

@SpicerDesignsLLC 4 ай бұрын

May be angled slightly causing it to walk. Might have to adjust the setup a bit.

@jtcard4369 4 ай бұрын

@@SpicerDesignsLLC derpppp, I figured it out. The Ortur 3 comes with a small metal bar that stops the forward movement 😂

@kenthorsen4558 Жыл бұрын

My wife wanted to know...does it have to be Keystone beer cans or can it be any beverage in a can ? Nice idea on the yeti tumbler.

@SpicerDesignsLLC Жыл бұрын

Has to be Keystone. Hah.

@MdbCoin 4 ай бұрын

So if I have my machine attached to a work surface with the screw-down brackets in the corners, I would have to remove them every time I want to use the rotary so. I can raise the machine?

@SpicerDesignsLLC 4 ай бұрын

Thats correct. Any time you use a rotary tool you will need the extra hight.

@dave_the_bartender4904 Жыл бұрын

What Do you Do when your thirsty ?

@SpicerDesignsLLC Жыл бұрын

Drink a Keystone. 🍺

@justingates4042 6 ай бұрын

So I have the an Ortur Rotary as well, but my model looks different. My question is, how do I specify in LightBurn where to start and get it head on without screwing up? lol Cause it always seems to want to start in left-front most corner and I can't get the rotary up that far from where it plugs in at. So can you explain how to tell LightBurn where to actually start the work?

@SpicerDesignsLLC 6 ай бұрын

I think i explain that exact thing in this video. I use the center origin and current position. Check that out again. Should explain that part of the setup

@justingates4042 6 ай бұрын

@@SpicerDesignsLLC awesome, yeah I haven't watched the video yet, but I will when I get home. Just saw you had the vid and thought I'd ask. Thanks for being so helpful!

@crazybordercollies Жыл бұрын

Great videos as always. You capture things going well but also when they don’t. You are real and complain or bitch as you should if something isn’t going right. You also have fun and that’s important. Found your videos while researching a CK2610 Cab. We need more tractor videos. Any update? Do you find that the 25 hp is fine for everything you do?

@SpicerDesignsLLC Жыл бұрын

Thanks! I really appreciate the feedback. I do have some more tractor projects coming up. I have a couple good upgrades coming. Ill have more in the spring as well. Thanks for the comment.

@SpicerDesignsLLC Жыл бұрын

And yes the 25 hp does well for me. I confirmed with kioti its a 35hp thats detuned for emissions. Ive only seen one video of a guy dialing it back up.

@American.Divergent 5 ай бұрын

What dpi you use. I’m getting lines in my fill. I’m using same setup as yours.

@SpicerDesignsLLC 5 ай бұрын

I cant remember. Its been a while since i used that laser

@EtchinAaronslaserworkshop 5 ай бұрын

Hey brotha im trying to set up my rotary like yours exact one an when i have everything ready an i push frame it crashes into the side rails tryingvto figure out why this is

@SpicerDesignsLLC 5 ай бұрын

The X axis is crashing? I would check your design. Also use the center for your origin and make sure your origin is set to current position.

@EtchinAaronslaserworkshop 5 ай бұрын

It goes to the left an crashes against the rail check design an everything

@EtchinAaronslaserworkshop 5 ай бұрын

@SpicerDesignsLLC I'll try all this but not sure if will wotk

@EtchinAaronslaserworkshop 5 ай бұрын

Thankx brotha

@EtchinAaronslaserworkshop 5 ай бұрын

Just have been trying to perfect this pos since this lasers come out fml man lol