🔥 ATOTO S8 Car Navigation System | Step by Step

No video

🔥 ATOTO S8 Car Navigation System | Step by Step | How To Install 🚗

Рет қаралды 76,523

Күн бұрын

This Description May Contain Affiliate Links.
💥 Atoto S8 Premium Android Car Entertainment System ------------ amzn.to/3nXv5Ep 💥
Click on the ⭐ SHOW MORE ⭐ button below for more information.
This is an ATOTO S8 Complete Step by Step How to Walkthrough Install Guide. This installation was performed on a 2011 Chevrolet Silverado 2500 HD, but the same steps will work for many other makes and models.
Atoto S8 Premium Android Head Unit ----------------------- amzn.to/3nXv5Ep
Silverado Double Din Installation Kit ------------------------- ebay.us/j86HIx (used in the video)
Metra Radio Replacement Harness -------------------------- amzn.to/3pNJh3t (Retains CHIME)
Silverado Double Din Full Installation Kit ------------------ amzn.to/34YhSUp (Chime/Nav/Delay)
Tools Used to complete this install.
Heat Shrink Solder Seal Wire Connectors ----------------- amzn.to/3hqC86b
Butane Torch Lighter Adjustable Pen Lighter ------------ amzn.to/3ppzVdM
T-Tap Self-Stripping Wire Connectors ----------------------- amzn.to/38HmjUr
Electrical Connectors Crimping Tool ------------------------ amzn.to/2LL7h6s
Connect with me on Social Media
📘 FaceBook: / thejungleexplorerofficial
🐦 Twitter: / thejungleexplo1
🤳 Instagram: / bbhttkyhzyo
🐟 Fishidy: www.fishidy.co...
🌐 Website: thejungleexplor...
--------------------------------------------
[10in Floating Display] ATOTO S8 Premium S8G2103M, In-Dash Navigation/Android Headunit, Octa-Core CPU, 2 BT with aptX, Phone Link, QLED Display, VSV Parking, Support 512GB SD and More
Product Information
Product Model: S8 Premium Version with 10.1inch floating display; Model No: S8G2103M(2GB/32GB);
System Information. SoC Chip: Intel Airmont X86 Architecture Spreadtrum SC9853i Octa-Core (up to 1.872GHz) CPU with ARM Mali-T820 MP2 GPU, advanced 14nm manufacturing process. System Version: ATOTO AICE UI 10.0, which is developed & customized based on Android 8.1 Oreo; System Language: English, German, French, Italian, Spanish, Portuguese, Japanese, Russian, Arabic, Polish, Korean, Dutch, Thai, Turkish, Ukrainian, Hebrew, Greek, Hungarian, Indonesian, Vietnamese and Chinese.
DSP / Pre-Amplifier: Built-in Digital Signal Processor allows you to set precise equalization, signal delay, bass boost, bass filter. Preset 9 EQ Modes, and 32 adjustable frequency bands (16 bands for front and 16 for rear). Built-in Max 4*49W BTL Amplifier with RMS 4*29W (Vcc=14.4v, THD=10%);
Bluetooth & Radio Tuner: Dual Bluetooth (BT1 5.0 & BT2 4.1). Bluetooth1 is Qualcomm Bluetooth
5.0 with aptX (SBC & AAC are also supported), and it supports HFP/HSP/A2DP/AVRCP/PBAP protocols; Radio tuner: Built-in high sensitivity FM/AM radio tuner with RDS/RBDS feature (and the radio station name will be displayed if available);
Display: Full HD 10.1inch 1024*600 5-Touch Capacitive Touchscreen with 600cd/m2 latest QLED screen (a type of quantum film LED-backlit LCD technology which can greatly improve the color effect, and can provide very clear and vivid picture quality. It also inherits the advantages of 178° full-viewing angle and high contrast of the IPS LCD);
GPS/Navigation: Built-in GPS Receiver module with an external GPS antenna and Google Maps app is installed as the default GPS map.Users may need to download offline map data for a specific area for offline navigation if preferred. Other maps/navigation apps (Waze, Tomtom, HereWeGo) from Google Play Store can also be installed;
Phone Mirroring & Phone Integration Link: Phone Mirroring - EasyConnect app pre-installed, and it supports working with the latest iOS & Android devices (system firmware update may be required). Two options (USB /WiFi) are all available for connecting to Android smartphone and iPhone; Phone Integration Link (CarPlay & Android Auto Connection)
--------------------------------------------
Please Note: In the event that a product used in this video has been discontinued, the product link will be replaced with a comparable product from the same manufacturer if available.
DISCLAIMER: This video and description contain affiliate links
Thank you for visiting the jungle explorer channel. DISCLOSURE: This video and description contain Affiliate Links, which means that I may earn commissions through links you make purchases through.
DISCLAIMER: All information and actions covered in this video are our opinions and are for entertainment and informational purposes only. They are not intended to be viewed as professional or legal advice. If you choose to use or follow any of the information in this video, you do so at your own risk and agree that you are responsible for your own actions.
Thank you for visiting the jungle explorer channel.

Пікірлер: 123

@thejungleexplorer 3 жыл бұрын

🙏If you found this video helpful, please consider sending a couple bucks my way to say thank you by hitting the THANKS button under the video 💲❤. You can't imagine how much I would appreciate it. 🥰

@Rpeices 7 ай бұрын

Thanks so much for the video I am upgrading from the s8 7" to this one as I had many issues with the previous one so I am giving Atoto another chance. This is going to be a crazy install in a Tacoma but thanks for showing how to remove the screen as I have to in order to fit this in my truck

@thejungleexplorer 7 ай бұрын

You are welcome. Some commenters on this video have stated that newer models of the S8 have been improved with a better way to remove the screen than what I show in this video. I have not seen them but that us what some commenters have said.

@Rpeices 7 ай бұрын

@@thejungleexplorer I'll take the screen off and let you know if it's the same ribbon style.

@Rpeices 7 ай бұрын

I can confirm with the 2023 model it's a push in connection instead of the ribbon dangling there so it's much easier to re hook the screen up 😊

@thejungleexplorer 7 ай бұрын

Thanks for the update. I am glad to hear they improved it.

@jayjayharriswarfareinstrum2457 2 жыл бұрын

Great video and it was on a Christian radio station🙌🏾

@thejungleexplorer 2 жыл бұрын

Thank you for commenting JayJay Harris Warfare Instrumental. I am very happy to hear that you enjoyed the video.

@officialWWM 2 жыл бұрын

Thanks for showing how to remove the screen. It’s been doing my head in trying to figure out how to un clip that ribbon!

@thejungleexplorer 2 жыл бұрын

My pleasure. Glad it helped

@Tm19718 3 жыл бұрын

The wifi nor the gps antenna need to be above the dash. Both will work and be A LOT cleaner looking if mounted under the top plastic of the dash. As long as there is no metal blocking them, both are able to get strong signal through plastic.

@Usmanthemecano 2 жыл бұрын

No doubt

@GNXClone 2 жыл бұрын

I was wondering about this. Will save a lot of effort not having to remove all that trim to mount high on the windshield.

@thejungleexplorer 2 жыл бұрын

Thank you for commenting Tom Meserve!

@trickyynicky 2 жыл бұрын

Exactly the video I was looking for!

@thejungleexplorer 2 жыл бұрын

Thank you for commenting trickyynicky! I am so glad the video was helpful.

@rayharmacinski4934 2 ай бұрын

You don't need to have an ignition control wire for the s8 to work you can tap any of you vehicles accessory wires and it will turn on the unit when you turn the key or you can add a tap to your fuse box

@thejungleexplorer 2 ай бұрын

👍

@brianpowell5421 2 жыл бұрын

Just an observation... Both antennas were incorrectly positioned. Any GPS antenna should be fixed to a flat surface with the dome part facing the sky. Any wifi/ gsm antenna should be positioned in a vertical orientation with the wire exiting from the bottom ( behind the A pillar trim)... this would give you best possible signal at all times.

@thejungleexplorer 2 жыл бұрын

Thank you for your comment.

@duceky1977 2 жыл бұрын

had mine positioned the same way no problems with the signal at all.

@Audioelement1 Жыл бұрын

I place my on top of the head unit temporarily while I wait a week for my rer camera adapter to come in and so far GPS and wifi work great

@mostafaazizullah Жыл бұрын

How does the in system gps work?

@thejungleexplorer Жыл бұрын

It works just fine. I have had no problems with it.

@julios.8116 3 жыл бұрын

YOU NEED A PAC AUDIO LCGM29 SMART HARNESS IN ORDER TO HAVE A ACCESORY CABLE ALSO GIVES YOU WHEN YOU TURN OFF VEHICLE , STAYS ON UNTIL THE DOOR OPENS..

@thejungleexplorer 3 жыл бұрын

This is a basic installation video. My Silverado is a WT model and does not have any of these extras that are found in the more luxury models. There are actually many different kits and harnesses that can be used or are needed in some cases depending on what a person wants, desires, or needs. Some cars have steering wheel controls, others a BOSS speakers system, some have OnStar, etc, etc, etc. This video is 32 minutes long already and I made it as short as possible. To create an install video that covers every possible configuration in detail would have to be many hours long.

@johna.4334 3 жыл бұрын

No shouting...please.

@travisthomas518 6 ай бұрын

Fyi there is a screw on top of the little bracket to slide the screen off

@thejungleexplorer 6 ай бұрын

Mine was a pre release beta model and did not have that screw. As a result of my video, they upgraded the newer units to make it easier to install.

@doggydog7919 2 жыл бұрын

Looks like with those mounting screws you should be able to mount the unit in deeper to give it a less pushed out look if I'm not mistaken

@thejungleexplorer 2 жыл бұрын

It is as flush as I could get it.

@doggydog7919 2 жыл бұрын

@Jungle Explorer could you do me a huge favor? Can you measure the distance from the furthest bottom of the screen up to the where the bottom of where the double din starts. I'm trying to figure out how it's going to fit on my dash, I thought this model was adjustable up and down but I have learned it is not. Thank you!!

@thejungleexplorer 2 жыл бұрын

I went out and got some measurements for you. I wasn't sure what you were looking for so I took some pictures. you can see hem here: photos.app.goo.gl/s2jtoX62JhRViJaWA

@doggydog7919 2 жыл бұрын

@Jungle Explorer wow I really appreciate you doing that for me!! I was more trying to see where the bottom of the screen ends up vertically compared to the double din insert. Just to see if it's going to cover my heat/ac controls as this unit doesn't have the vertical adjustability like some of the other units. But I really do appreciate the time you took to do that!

@edschukar8030 3 жыл бұрын

How have the solder crimps held up? I've heard mixed reviews.

@thejungleexplorer 3 жыл бұрын

No problem myself. You have to make sure you see the solder melt. Some people just heat enough the shrink the rubber but not enough the melt the solder. I heat until I see the solder turn to liquid and spread over the wire.

@froylanmedina 2 жыл бұрын

Did you have to do any calibration after plugging screen back on? I had to remove my screen for install/mounting. Hooked it back up and it turns on and the bottom buttons work but touch screen is not responding. I had tested it out before I took the screen off and it worked just fine.

@thejungleexplorer 2 жыл бұрын

I think that you may have not gotten the screen ribbon connected properly.

@froylanmedina 2 жыл бұрын

@@thejungleexplorer I removed just now and re installed and it’s still not responding. It’s just the little hook on each side correct and then push the flap down?

@jayfizzle9670 Жыл бұрын

Thanks!

@thejungleexplorer Жыл бұрын

My pleasure. Glad it helped.

@andrewboyd5826 2 жыл бұрын

After some time how do you like it? I have the gen2 in the 7 inch and it's not wireless android auto!!! Also it won't keep with the time and txt don't show up on screen which I thought it did

@thejungleexplorer 2 жыл бұрын

It's okay. It freezes up sometimes if running a map program for a long time. I like the 10 inch screen when navigating.

@jarod3371 Жыл бұрын

@Andrew Boyd if you update the firmware, it has wireless android auto. Reach out to atoto with exact model number of your stereo and they will guide you to updated firmware and instructions.

@thejungleexplorer Жыл бұрын

@@jarod3371 Thanks. I will do that.

@bigdognance 2 жыл бұрын

Thanks Great Video!!!🤠

@thejungleexplorer 2 жыл бұрын

My pleasure. Glad it helped

@dcjoys7179 3 жыл бұрын

Were you able to get a cell phone simm card to work in the ATOTO S8? If so, can you let me know how and which carrier?

@thejungleexplorer 3 жыл бұрын

Not as of yet. When I do, I will make a video of it and post a link for you.

@dcjoys7179 3 жыл бұрын

@@thejungleexplorer Awesome. I have not had ANY luck.

@WoJoMoZilla 3 жыл бұрын

i have an s8 pro - t-mobile sim works fine

@JuanRodriguez-vw3sf Жыл бұрын

Does this radio have apple car play

@thejungleexplorer Жыл бұрын

This is an Android system, not and Apple system.

@JuanRodriguez-vw3sf Жыл бұрын

Does this radio have apple car

@thejungleexplorer Жыл бұрын

@retroarcade1up 2 жыл бұрын

The link for the installation kit is no longer available. Any chance you can send an updated version? Thanks!

@thejungleexplorer 2 жыл бұрын

Thanks for letting me know. I will update it and notify you.

@MrKoopas 3 жыл бұрын

I saw you did a video on the S6 in a Ford Econoline. Do you think this S8 will work in the econoline?

@thejungleexplorer 3 жыл бұрын

Yes. It is still a Double Din insert box. The screen sits outside of the box, so it is a little more complicated to put in, you saw if you watched the video. I can tell that at my age, I do appreciate that larger screen size.

@johna.4334 3 жыл бұрын

Does ATOTO supply a ribbon cable extension for radio holes 8"+ below the dash?

@thejungleexplorer 2 жыл бұрын

@sixeight6 2 жыл бұрын

Great video. How much did u pay for the unit? How do u like it so far?

@thejungleexplorer 2 жыл бұрын

It was given t me to create the installation video. It is okay. I like the big screen. I pretty much only use it as a radio and navigation device. It has a couple of problems though. As I showed in the video, I could not install it without disconnecting the ribbon tape and that was a huge pain. A few months after the installation the whole top one inch of the screen stopped being touch-sensitive. Everything still works but I can't access the pull-down function or the buttons along the top. I did some searching and I am not the only one with this problem, so I don't know if it is because I did not reconnect the ribbon tape right, or something else. Another thing is that it sometimes freezes up, especially when running the Sygic Offline Navigation app. It runs Google Maps okay, but that requires a data connection to your phone and that is not the easiest thing to set up. The main thing that irks me is that there is almost no support from Atoto and the company has not released any kind of update for the device. So in short. I like the big screen and I love it for navigating. The radio works well. Would I buy this unit to install it after using it? Nope.

@officialWWM 2 жыл бұрын

@@thejungleexplorer er, you do know you can down load google maps so you can use them offline? Also, setting up your phone to use as an internet connection is extremely simple! They provide several different options. The easiest is to use Bluetooth and it will connect with your phone as soon as you turn it on! Further, if you add a reverse camera and a dash cam, this becomes a very capable unit. I get my emails, use the hands free for phone calls, watch KZfaq and Netflix when camping etc. it sounds to me like you haven’t even scratched the surface of what this device can do.

@thejungleexplorer 2 жыл бұрын

This was a basic install video. Yes, there is almost unlimited other subjects that could have been covered, but that was not the purpose of this video.

@oswaldomolinaplaza4482 2 жыл бұрын

Hermosa 👍👍

@thejungleexplorer 2 жыл бұрын

Thank you for commenting Oswaldo Molina Plaza!

@JustWasted3HoursHere Жыл бұрын

That's weird that the ribbon cable doesn't detach from the monitor itself instead of from the head unit side. I swear I've seen other reviews for this unit that detached it from the monitor (and it was much easier to do: No screwdriver required). Were you able to get the steering wheel controls to work with this unit? What other vehicle-specific features were integrated into the unit (for example, door ajar, climate control info, etc)?

@thejungleexplorer Жыл бұрын

I have heard other units can do it too. All I know idea the unit I received had to be done the way I did it. As far as controls go, there adaptors available for all of those thing. My truck does not have them.

@MiguelRedPy 2 жыл бұрын

I just bought the Atoto S8 but I am having problems with the volume, which even in Volume 1 is exaggeratedly high that it is even impossible to talk. I have a Hyundai Santa Fe which comes with a factory amplifier. Could my problem be here? Any suggestions that you can give to the technician who installed the multimedia center for me?

@thejungleexplorer 2 жыл бұрын

Sorry brother, I wish I could help. I don't have a clue what is causing your issue. My best guess is that it has to do with your car, and not the Atoto. . I would try asking for help in a Hyundai forum like this one. www.hyundai-forums.com/

@AlbertoBGoode 3 жыл бұрын

¡Bravo!

@rodelviernes1287 3 жыл бұрын

Hi, I bought this unit using the link in the description. Amazon sent me a unit but it's not the one in your video. The box says ATOTO S8 Premium Model Number:S8G2114PM(3G+32G). I only realized I got the wrong one after I connected all the wires and tried to install the unit. Can you help me get the right unit? Thank you.

@thejungleexplorer 3 жыл бұрын

Hi. I am sorry to hear that you are having problems. I do not work for Atoto. Have you tried contacting them about the problem?

@Randeep375 3 жыл бұрын

I clicked on the link and I did not get the one that shows in your video it's s8 premium

@thejungleexplorer 3 жыл бұрын

@@Randeep375 Sorry to hear that. I do not work for Atoto or Amazon. It is possible they have modified the product page since I originally posted the link. I will check it and see if I can fix it.

@chounglee5741 Жыл бұрын

DO NOT TAKE THE RIBBON CABLE OFF PER VIDEO. THE WHOLE FRONT TRAY SLIDES OUT WITH THE SECONDARY CONNETOR!

@thejungleexplorer Жыл бұрын

Thank you for this great information Choung Lee. I appreciate it very much when viewers contribute useful information as you have here.

@FlexnGrowth 3 жыл бұрын

Can you show me the eq setting page? Im interested in this brand but what to make sure of a couple eq settings

@thejungleexplorer 3 жыл бұрын

I just shot this video for you. Hope it helps. kzfaq.info/get/bejne/ot5pgcJ4qbHLoGg.html

@logangoin6317 2 жыл бұрын

We're you able to retain your steering wheel controlls? I understand you can get a controller for the 2007-13 silverado

@thejungleexplorer 2 жыл бұрын

My truck does not have steering controls, but it is possible with the right adapter.

@nikkeshelton8216 Жыл бұрын

What bezel kit did you use?

@04DynaGlyde 3 жыл бұрын

What about connecting an amp power wire to the ignition switch wire on a 2002 Silverado? Can the stereo and amp SAFELY splice into the ignition switch power wire? Can anyone give me some advice?

@GNXClone 2 жыл бұрын

Yes. But the amp turn on wire from the head unit is a better choice because it will turn off the amp when the HU power is off.

@thejungleexplorer 2 жыл бұрын

I'm not sure

@Usmanthemecano 2 жыл бұрын

If the display was easily removable I would buy this. I'm afraid someone will try and steal it otherwise

@thejungleexplorer 2 жыл бұрын

That is a thought.

@roryzebedy51 2 жыл бұрын

Hello, I figured out that if you want to remove the display, well the easier way is to remove all 3 top screws and it comes right out without the cable still attached to the display. The cable itself actually detached from the main component. Anyway hope it helps

@roryzebedy51 2 жыл бұрын

Also those 3 top screws is all you need to take out to get that display panel off

@prfec21 2 жыл бұрын

removing the screw in the middle leaves the screen without the need of what you are doing

@thejungleexplorer 2 жыл бұрын

Good comment. Thank for the information.

@jsanakonda450 Жыл бұрын

Looks like you didn't bother to read manual first, what you did with that screen ribbon is criminal, I wonder how many people broke their unit follow your poor advice!!! If you unscrew three top screws instead side ones - correct way - fitting is like drawer with plug and socket!

@thejungleexplorer Жыл бұрын

Please post a link to a video demonstrating the exact procedure you described for the exact model.

@adris519 Жыл бұрын

exactly.. no need to take the ribbon off. Instruction manual clearly says to take those three top screws off to detach the display. That's easy process. Please go though the manual first before posting a video on youtube for popularity and then misguiding people.

@America_took_my_zebra_stripes 3 жыл бұрын

How do i get me hd dvr camera to work for my s8 pro?

@thejungleexplorer 2 жыл бұрын

Thank you for commenting Samoriah! I am sorry, I do not know how to answer this question.

@htownandre7385 3 жыл бұрын

How do you compare this one to the dasiata? Do you prefer the atoto?

@thejungleexplorer 3 жыл бұрын

I am nor familiar with the Disiata so I cannot offer a comparison. Sorry.

@johna.4334 3 жыл бұрын

I know one important feature ATOTO offers is the ability to read automotive codes and diagnostic info for your vehicle. Does Disiata offer automotive diagnostics? I do not know.

@eacalways 2 жыл бұрын

So the screen is not detachable?

@thejungleexplorer 2 жыл бұрын

Not easily.

@Bighomie353 2 жыл бұрын

Can u move the screen to face the driver???

@thejungleexplorer 2 жыл бұрын

Unfortunately no. It can tilt up or down, but it cannot move side to side.

@alhamedi66 3 жыл бұрын

What the difference between iso and universal cable

@thejungleexplorer 2 жыл бұрын

👍

@The_Fitz 2 жыл бұрын

How far does the screen stick out from the dash?

@thejungleexplorer 2 жыл бұрын

A couple inches.

@joshuakirkland1596 Жыл бұрын

Does anyone know how many inches from bottom to top? I know its 7in wide but i cant find the height plz help😮

@thejungleexplorer Жыл бұрын

This is a 10 inch unit, not a 7 inch.

@ilovepeterlustig8381 3 жыл бұрын

Does it have apple carplay

@hmata3 3 жыл бұрын

Yes, built right in to the radio (no dongles required). You'll need to connect your phone to the appropriately labeled USB cable and select the Car Connect app, i think it's called.

@thejungleexplorer 2 жыл бұрын

Thank you for commenting i love peter lustig!

@kenavram5586 Жыл бұрын

@@hmata3 With a firmware update it will support wireless Android Auto and Apple Car Play. I emailed Atoto and they confirmed this.