Had this one given to me. Of course it doesn't work. Lets fix it
Пікірлер: 60
@2ndPyleOfVinyl2 жыл бұрын
I actually bought one of these for a dollar at a garage sale years ago. I got a lot of use out of it and it actually made me appreciate mono VCRs. For linear mono, it is not the greatest but it is doable. I found that Japanese recorders from the 1980s had superior linear sound. I particularly like the Sharp mono and the Hitachi Dolby stereo units from the eighties. Very simple repair. I had to check the position of the erase head on mine as it would not play back tapes with sound during a test. I guess not enough tension. Thank you for these great videos.
@sandyady1002 жыл бұрын
i love to see these machines... it reminds me my days... those beautiful era, with these beautiful machines.
@CesareVesdani2 жыл бұрын
VCRs are good piece of collectibles.
@chriscutress17022 жыл бұрын
Great fix for a machine that hasn't been used since Mulroney brought in the GST. Great to see you got the mono monster working.
@t0nito Жыл бұрын
It's incredible the miniaturization and cost cutting of electronics, that thing was built to a bare minimum!
@2ndPyleOfVinyl2 жыл бұрын
For the time, these were way better than the Orion mechanism that was sold by the likes of JVC (for instance, the HRA591U). The Orion ones were even worse than Funai. The Orions had an optical mode switch which would take forever to switch between functions. Plus, they had horrible sound and video quality. The hifi was temperamental and the linear audio was fuzzy and had a high pitched ring throughout.
@mjl44234742 жыл бұрын
I like that you didn't have to fix it, but it beats it going into landfill and someone might take it off your hands for archiving
@12voltvids2 жыл бұрын
I'll give it away more than likely.
@reacey2 жыл бұрын
How quickly did he figure out the problem here... Very impressive
@richardkruse4663 Жыл бұрын
I know this video is old as the hills! I have a similar unit (Panasonic PV-V4520) with EXACTLY the same problem - the little felt strip (for back tension) evidently broke & dropped off. Like you, I found it in the bottom of the machine; unfortunatly mine had snapped in two. So unless I can magically find that little bugger, the machine is doomed to recycling, I'm afraid! Anyhow, I'm enjoying your way-back-machine videos!
@12voltvids Жыл бұрын
Even if it is a bit short it will work. Glue the piece back on.
@dege136 ай бұрын
I just picked up a stereo model much like the one in this video for free today. It works good after a head cleaning.
@randymoyer53512 жыл бұрын
I used to sell Alot of these Kind of VCRs , They are generally very Reliable, never had any Issues with that Model VCR,I still do have some here yet and some Samsung VCRs as well as Magnavox, But Panasonic Made some good VCRs and this Models one of them.
@chrismosquad10562 жыл бұрын
I’m giving you a like for your Variac. 😎👍🏻
@nigeldonaldson16472 жыл бұрын
Thank you for your rare advice on how to fix a vcr with no play back. i'm having the same problem (my brand is also PANASONIC) except the picture goes to black in play back also it makes an unhealthy whirring uneven sound in play mode. I know vcrs are a thing of the past BUT I have many tapes not available on DVD or streaming formats, & so i need to fix it, when i fast forward on screen there's very little picture also, and its sometimes winding slowly forward & back
@annierenard59542 жыл бұрын
nice fix, thanks for sharing
@lawrencecavens5760 Жыл бұрын
Yep, I think that particular unit was a 2005 or at least around that area looking at the date on the motor assembly as you were disassembling the unit.
@johnweegenaar73142 жыл бұрын
I like how you problem solve you repairs
@gamingmusicandjokesandabit12402 жыл бұрын
Plot twist: They also gave you a blank tape and said there's no picture when they play that tape in that VCR.
@jr-pl9kj2 жыл бұрын
mono vcrs are useful for stationary studio filming. i did this back in the day. when i had a vhs-c camcorder that i can move around easy and i wanted to record in SP for best picture and sound. then until i found a way to record in stereo with a hi-fi vcr with 2 mics ... fun times.
@craigm.90702 жыл бұрын
I had a Panasonic that looked like that years ago, don't know what the model number was on it though. It always worked like a champ, sad to finally see it go, DVD killed the VHS show they say.
@koppo56572 жыл бұрын
Hi. I have a sony slv l44 vcr that has an unstable picture when i play or record ep tapes. While fast forwarding it looks ok though. Is there any way to fix it?
@user-id2pu6xj1i8 ай бұрын
I couldn’t get my Panasonic to display, I featured it in one of my videos, it ate 2 tapes and played for a second, so I just kept running a cleaning tape through it until it worked but then the cleaning tape got jammed
@austinthevhsvideogamelover52652 жыл бұрын
Dave sorry if this is off topic but today i got my wisdom teeth out. All 4! Im in bed relaxing and watching this vcr repair video.
@12voltvids2 жыл бұрын
ouch
@austinthevhsvideogamelover52652 жыл бұрын
@@12voltvids this chassis looks familiar to the 1997-1999 chassis made in japan. I REALLY liked those Panasonics as well as the mid- early 90's genetation with the broken ic2 connection which i never had and the front loading cog skipping the teeth causing the tape not to load or eject itself.
@2ndPyleOfVinyl2 жыл бұрын
@@austinthevhsvideogamelover5265 Oh man. I have a PV-4551 that had the second problem first and then it developed the bad IC after I poked around! Ugh! Can you fix those?
@austinthevhsvideogamelover52652 жыл бұрын
@@2ndPyleOfVinyl ic2 can be resoldiered very easilly. Thats the capstan drive ic that caused the picture to be wavy along with the sound and the speed is changing and the capstan motor stalls and causes it to eat your tape. VERY COMMON FAULT!!!!
@2ndPyleOfVinyl2 жыл бұрын
@@austinthevhsvideogamelover5265 Mine won't even move. No loading of tape or anything. Clock lights up. I press "power" and the system lights up and then powers off after a few seconds, back to showing the dim clock. No head movement. No mechanism.
@zx8401ztv2 жыл бұрын
Yep quite a cheap design, but good enough to do the job :-D. I was expecting the traditional plastic band/pad wrap around, but no. The final vcrs were £30 to buy, almost nothing, mad aint it?. Looks like Sir Clive Sinclair has passed away, his basic computers got a lot of people into using computers, and many more inventions r.i.p.
@pabitraelectronics75582 жыл бұрын
Nice ser
@socalRooster2 жыл бұрын
What do you recommend for cleaning the heads
@erasmoeduardoromanizegarra46782 жыл бұрын
how the loading mechanism is synchronized, spring-stretching lever does not move, panasonic VHS model NV-FJ623OPN
@markmarkofkane8167 Жыл бұрын
Bravo!
@jurek54612 жыл бұрын
Hey Dave, what email is best to contact you with questions?
@marlalowry21892 жыл бұрын
Thankyou!
@Loto.Nintendo Жыл бұрын
I have a problem with my vcr, it plays for a couple seconds, then the screen goes black, and the sound shuts off, but its still playing. If i just leave it black, the tape pops out on me, but i can pause the tape, doing that turns everything back on, but when i play it, it only plays for a few seconds and it does it again, and just keeps doing it. And it only seems to happen sometimes, is that fixable?
@lloydbrown15122 жыл бұрын
I'm confused , is there still a need for VHS, I rarely see any DVD's any more
@Monza620002 жыл бұрын
we still use them ..but not on a new tv,,,,we use my old panasonic viera plasma 42 inch ,,,...
@gllmll72272 жыл бұрын
For digitizing your vhs archive yes you need it
@SkylerScott20072 жыл бұрын
14:55 that is called Notification Name from sound effect is this (One Time from Samsung Galaxy S7)
@12voltvids2 жыл бұрын
That's my email notification.
@motor-doktor99862 жыл бұрын
👌
@speedyboishan87 Жыл бұрын
Hi i have a JVC HRS-9400EK VCR it shows the usual Blue Screen/Menu etc but when a tape is played it remains BLANK, NO PICTURE I CAN HEAR AUDIO, I have tried cleaning heads still same issue. Do you know what the issue could be. Thanks
@peteranees76872 жыл бұрын
Pls can u explain the electronic system of panasonic vcr
@user-cp2ou4wc6h2 жыл бұрын
You can use a spray to clean the switch mode without opening the switch mode
@sunspot422 жыл бұрын
You can, but it gets cleaner and you can inspect the little pins if you open it up. You also don't risk spray or drips getting on components you don't want it on.
@NK-dl4jj9 ай бұрын
I changed the belt to rubber band it works
@12voltvids9 ай бұрын
For a week
@buckabrams43374 ай бұрын
Could you by chance help me fix my vcr plz
@jpa5456 Жыл бұрын
Then you go to test the repair and suddenly the vcr blows up