Might I suggest you make a document of your stock settings and then also all of the OBDELEVEN changes you make during your vid. Basically a 'before and after'. Then list the link for the doc. Would increase the value of your vids tremendously.

I tried implementing this today following your steps - almost still works this way. Only difference was that I had to switch step 2&3. So that would be changing the ACC to Audi and only then was I able to change the Engine Byte 00 from Hex 09 to Hex 02. Otherwise, it just wouldn’t let me overwrite it. These changes in combination with adjusting the Haldex pretty much gave me a new car. I’m very pleased with the results! Thank you!

So far the best OBDeleven instructor ever!

Thanks a lot for this very helpful tip. If i may add something: i own a european Manual gearbox Golf 7.5 R ( 01/2018 ) and even if the byte 00 coding was not the same as yours ( 09 19 00 12 24 46 05 0B 30 04 ), i used the IOS OBD11 Longcoding function to change from HEX 09 to HEX 02 value the same way you described it ( Bit 0-Bit 3 to Bit 1 ) and it worked perfectly, no need to change the VW to Audi cruise control coding, BUT: It created two errors ( steering column and ACC ) after i checked... All i had to do was to quick erase these errors and it never came back. A wonder ! I have then driven the car in an overcrowded city, could activate the cruise control when Front Assist and ACC were flawless ! Thanks a lot again, you made me spare 15.000 $ not to buy an Audi S3 :-) Best regards from France

Great video-thanks I coded my 2018 Volkswagen Tiguan 2.0 liter accordingly - an excellent result in addition to the Stage 1 that was already on the vehicle

Just tried this, works perfectly! Thanks for the vid 🙏

my 2018 golf R feels a bit more alive, has more initial response and power in the low and mid range. this really works for those who want to remain stock

it's working perfect on my tiguan 2.0tsi 2018 except step 4 I had both lines in brake module and changedyour first option in both deactiveded

the makers of OBD11 should be paying you. Just purchased an OBD11 Pro because of you on line and champing at the bit to do what you have just done with my 200 km old R 7.5. Great video and thanks. Cheers from Australia

Mk7.5 R I just set me engine response to Audi, quite noticable, in race mode with launch control it's even more noticeable. Front wheels break traction from the DSG 1-2 SHIFT. My throttle response says not available, but the engine setting was changeable

Love that you're in Canada cos kms etc is all relevant.

hey man.. just done these steps to my brother in laws mk7.5 gti and everything worked fine, he also got a resonator delete (£70) so it sounds a lot better and got a free little bit of performance and driveability from following your steps...excellent. also turned up the xds interaction setting to strong and it gives excellent improvement on uk roads e.g wet roundabouts etc, good bit of fun from a fwd 4cyl hatch

On my '17 Alltrack I set throttle response to Linear and Engine code to Audi. It certainly woke the engine response up more, a noticeable change. Have the Neuspeed Power Module too, so combo's for a poor mans tune. I did not have any issues or errors with my ACC keeping it with Brand-Logic VW. Setting it to Audi DID deactivate it and give errors however. Odd.

I activated the speed sign recognition in my 2020 r and I had the speeding warning menu straight away you mentioned and the other option for last remembered distance was already active. I do have a newer 9 inch head unit without any knobs all touch. I want to do this but bit worried if I can't go back lol 😂

Hi this is great video, i have a 2018 gulf alltrac and i would love to get better throtle responce and i would like to possibly have the DSG lock up sooner then it does. Do you think i can make the chages you made for my alltrac?

Thanks for this information. I have a vw Tiguan 2021. How can I do this changes? Which app do you use?

Great coding... It work perfectly I have a t roc 1.5 150 TSI and I noticed great improvement. No errors

I think it works with my Leon Cupra MJ18, because i feel it ( I will test it for a while! ). But my default hex was 0B ( Byte 0 - Bit 0,1,3 ). ACC no problems, and no errors! Thanks :)

very helpful video, thanks

Awesome channel and video thank you

Pretty cool! Can this work my Tiguan II 2018 R-line has REVO Stage 2 and TVS Stage 2+ ?

Do you think if I go pro I can get more features like ambient lighting at the minute its telling it's not supposed.

On my engine control module, byte 00 screen isn't showing those bit's to activate audi engine coding.. (mk7 r)help?

Hello you have idea if this works on CC Sport plus? Thank you

I own a Tiguan, assuming close to same settings, do you think this would put the Tiguan to the Audi Q3 performance in the same engine base and awd setup?

I have a 2.0 VW TDI and wondered if there was a way I could code the engine segment to a 2.0 TDI from an Audi as you have with the TSFI

Changed Mine Over To Direct In Carista super Easy No Issues

Do you know if this can be done to a Skoda Octavia Vrs 2016?

@ Netcruzer : can you give more details how do you make settings from 04:07 in the video - for audi brand logic. I have VCDS but can not find this option.

Do you think that would work for the tcross 1.0 Tsi? I'm so tired of the slow response on the pedal of the tcross.

Hi, I loved your videos I’m also a Canadian and I bought a 2018 golf R DSG as well a few weeks ago but I don’t have the Adaptive Cruise Control and I don’t find anywhere the info to Code the “normal cruise control” to Audi I’ve done the pedal and engine to Audi no problems except now the normal cruise not working and error with “!” In the cluster with cruise sign… Anybody solved that issue???

At 4.55 in you video you talk about changing the ACC (Adaptive Cruise Control - Control Unit/Module 13) to Audi ... how do you do this I can not find any setting in that module to be able to do this? I have traffic sign recognition working in my car with sign speeds displayed in my dash but no overspeed warning or being able to set warning on multimedia screen (have a 2020 MK7.5 Golf R fitted with Discovery Pro Navigation/Audio system - Australia model car - Final Edition). I have however found two settings in Long Coding which are currently deactivated ... 'Speed_Limit_assistent' and ' Traffic_Sign_Detection'. Love your videos very well done and informative ... not like some who do not talk at all and do things so quick forever going backwards etc. to see what was done, and even then some things can't see as fingers in way. Anyhow new to this just bought this car new in August 2020 and my OBD11 about 3 weeks ago and still learning.

Thanks for this - worked perfectly in my 2017 Passat R-Line*, with the minor variation that the ACC changes weren't actually necessary or seemingly even possible, and continued to work without any fault. I did already have the "Last distance selected" setting though so I suspect the component or coding may have already been more in line with what Audi uses. Didn't give me any errors other than the same momentary "Brake booster limited" one or whatever it was, which didn't reoccur after the initial setting. Results in regular mode are nice. Definitely a bit less rough off the line and doesn't punch you in the face as soon as the boost comes on, a bit more graceful and whooshy while still retaining the same overall power. Worth it by itself, and I would have been happy with that alone. In Sport mode, wow - different car entirely. It automatically disables stop-start while you're using it rather than making you use the button, holds the revs higher while you're stopped for noticeably less lag when you set off and takes you off the line way faster - launch control or not. It doesn't even sound the same, it has sporty little growls on the downshifts that it didn't have before and actually seems to manage some legitimate growls when you rev it stationary. Honestly, I suspect the VW profile on this particular car was nerfed HARD in order to not talk people out of an Audi. *B8 - i.e. more like an Arteon than the weird NMS Passat the US gets

Do you think this will work for a 184 HP 2.0T 2018 volkswsgen Tiguan?

I have a Golf 7 with a 999 cm3 TSI engine, without ACC. If I change the Byte 00 with Bit 1 selected = Hex 02, than I donát need to add the rest of modifications?

Where excatly i can find adaptive cruise control function to change to Audi ? In long coding ?

I have a 2020Tiguan Comfortline without ACC, only have the CC. Do I still need to make the Brand logic change to Audi, or can I skip that? Also, you have a mod to disable engine start/stop feature? The voltage method (changing to 12V) didn't work.

@netcruzer do you know the long coding of the acc to brand logic vw to Audi? I have a similar device to obdeleven but mine is car scanner

Hello, this method only works with Vw and Audi?

Hello i have a question , when i scan my 16 gti dsg i get some green error codes and it says not adjustable and sporadic should i be worried?

Hi. I don't know if you will see this message. I would like to ask you if the same setup can apply to passat 2015 DSG 2.0 TDI or not? Thank you

can u help me i dnt know what i did with coding in obd eleven long coding my a/c stop working adaptive cruise stop working lane assist also blind spot too all not working please help me to set it back or reset

Would that work on 14 cc rline with a dsg?

HI, can make Tiguan 2018 R-line work?

idk why but i followed your steps on my 2018 alltrack but not able to get cruise control

Could this happen on my 1.5tsi Skoda Karoq?

Hi, Folks. I was trying this stuff on my 2016 MK VII Golf R WITHOUT ACC. I couldn't get the regular cruise control working with the Engine coded for Audi. I was able to get the Driving Profile Switchover changed from "Incremental, controlled over time" to "Direct: controlled over threshold value" and also got the Engine Vibration Reduction "Deactivated". But when I coded the Engine for Audi, the cruise control went wonky. Anyone have any thoughts on a non-ACC-equipped model? Thanks!

I tried removing speed limiter on my f30 this morning and it said failed. Is it possible for BMW?

Should this work as well on the facelift model?

how to code audi mode to seat leon 5f so i can use cruise control. i dont have acc module listed or instaled in car only normal cruise control...

Hello or does it work on the Passat B8? Thanks

Would that work okay for a mk7 2014 Gtd

I tried it on my Golf 7 GTI Performance from 2015 but it doesnt let me change the manufacturer to audi in the enginemodule. Can someome help?

Hello where do i find it brand-logic?

does this work on a 2017 110TSI ?

how do I get my cruise control back working??

Will these options work on a mk7 GTI buddy

U think id be able to do this on a mk7 golf?

can we do this for audi q3 2018 ?

Does this work on a mark7 GLI?

Would this work for a golf?

Does it void warranty?

Will this work on my mk7 GLI?

Will it work on 2012 VW Passat?

please please help me to fix my Audi i dont know what things i change now its 90 temperature and no a/c and neither anything working

Thanks for making these OBDEleven videos! I just picked one up myself and it's in the mail. Just wondering if your EQT Stage 1 ECU+DSG tune will affect the changes made? Or vice versa?

Does this void warranty?

It generally works, but Audi setting eliminates some ACC functtion, predective speed limit display and distance warning in front assist. I don’t feel any throttle improvement when setting the engine to Audi. Setting module 44 to linear does the trick and increase the consumption as well. When I change the engine to Audi the consumption decreased to normal. No throttle improvement. Vw tig allspace 2.0 tfsi 22.

Will this work on an Audi A3 1.8t ?

Works for manual too?

Little late but I tried it and everything went well, untill I wanted to do the “audi brand logic” thing. I don’t see the “brand-logic“ option anywhere. Can someone pls help me? Because I do have the acc error right now

on arteon it gives red error about brakes p164700, checking coding/versions of? cannot clear it. Anyone else had it?

How does this affect your gas mileage?

Work for mk6 gti?

Safe to do this on a mk7 tdi?

Hi, anyone have tried this on a Tiguan 2018 TDI ? thanks

Tried these tweaks myself. Mind you I am JB4 tuned but I’ll save you some time and say that the changes are very minor. It felt like boost came on with less throttle when I changed the throttle remapping to linear but I wouldn’t say that the car felt completely different or anything. As for changing the engine code to “Audi” logic I noticed no difference. Again, I am JB4 tuned so what I feel may be completely different from a stock car or a flash tune.

Thank you for doing your homework and sharing the results. I had done this previously but only used step 1 (No audi code change). I felt a difference but didn't like it. Might try again. By the way, have you played with the increased traction (haldex) mod and disable xds? first change seems to increase haldex response and makes it seem more awd. Steering feels heavier too but not sure it's a placebo. Latter change disables rear braking when turning (I did this to save rear pad life). Would like your opinion on this if you get it done. 👍

Thank you

I did change to Direct in my Skoda Superb 2020 and I could not feel a difference, this is like you describe it in the first part of your video.

Do you know if that starting on vibration reduction actually increases the clamping force of the clutch packs And do you know if your 2018 model has the DQ381DSG version

hmm ive done a lot of testing on this too.. most people think driver profile switchover is just that.. effects when you change driving profiles.. but if you found it changes throttle.. thats interesting..

hi, very nice guide. thanks alot for the acc help :) But why did you uncheck bit3 and check bit1 in the engine longcoding under byte0. thnaks alot

I just bought a pedal tuner

Hello, i have a long code problem with my 2014 GTI Direct threshold worked, but when i try long coding the engine it just wont let me switch from 09 to 02 Any ideas why?

your launch on 3k?

wow,cool video,it got some spunk

Can you show how to do this on obd11 pro ios? I've been trying to figure it out but the long coding setup is a lot different.

Did this with my 19R, didn't have to change my cruise control, but did loose launch control for some reason. Good results otherwise.

Pretty cool! Think this will work on a 17 Manual R?

Changing the throttle responsiveness was one of the first OBD eleven tweaks I did. Last night, I changed the engine responsiveness to Audi thru the app section which was 10 credits. Is this the same thing you did, but you long coded it? I turned it off without trying it out because I read that ACC won’t work and it will throw errors. I have a 2018 Golf R manual Cobb protuned. So I wonder if I will even feel a difference?

Setting the Audi engine code (byte 0 --> set to 02) made my car throw a static fault code in the brake unit (P164700). Reverted back, cleared/re-scanned and fault is gone. CAD 2018 Golf R without DAP/ACC here. Does your car show any faults now after a re-scan?

Hi , would these coding work on a 2015 mk7R with a custom ecu flash ?

Will this work on a Seat ibiza 2019 1.0tsi 115hp? Thanks!

is this going to “mark” the ecu as a flash? as in void the warranty?

Do you need a pro/unlimited to make the adaptation change. Thanks in advance.

These are all cool and I am going to try but the video would be easier to follow if you gave step by step instructions to change these settings. I know you amended an earlier video but for this of us new at coding a "dummies" version would be helpful. Also, why dont you create a video of back up using the OBDEleven. Seems like a silly step but I have to figure out how to do it for the first time to be safe.

Wel obdeleven first gen with pro plan will reset DSG

Help me I have a mk7 2016 I did the first two parts and I am not able to have cruise control but I know it is cause I don’t have acc do you know how to fix it?

should be the same process for MK7 GTI, correct?