turbo BOOST TEST using “OBDeleven” (audi a4 volkswagen)live data

Рет қаралды 19,190

2 жыл бұрын

Пікірлер: 25

@tedjohnson64 3 ай бұрын

Brilliant tutorial! I’ve been searching for a long time, trying to figure out how to graph obdeleven live data like that.

@dubbified 2 жыл бұрын

Nice vid. I've got the rosstexh, but I'm buying this ASAP

@sr20dett1000 Ай бұрын

I'm having an issue. B7 A4 2.0t. My engine load is reading over 100% with very little throttle input and low rpm, which I believe is causing me to run rich p0172. The list of maintenance that you can think of i already did. The car had misfire cylinders on cylinder 2. I replaced the coil packs and spark plugs because it was time. The PCV was no good either, that got replaced. The misfire continued, swapped injectors and misfired followed. Replaced with rebuild injectors. No more misfire. Did the carbon clean on intake ports. It used to be my car but now it's mom. I maintain it for her. She let me borrow the car once before the misfire. I could tell something was wrong but I didn't give it much thought. Later she called me about the check engine light ,which turned out to be the misfire on the cylinder 2. It's all repaired now. I think the high engine load causing the engine to run rich is what led to the injector failure. I can't seem to find any info on what is causing my car to have a high engine load.

@martindouglas6538 4 ай бұрын

Great informative video, thanks. (Tell police your using your phone whilst driving without telling them) Be careful mate.

@deantaylor4991 2 жыл бұрын

What are your thoughts on the wastegate arm adjustments that people recommend on the forums and stuff? I know you said it can't be adjusted but I know lots of people recommend adjusting the jam nut on the wastegate linkage arm.

@georgem1574 2 жыл бұрын

Nice informative video. What was final cause?

@gentianramadani1472 Жыл бұрын

Hi, Thanks for the very useful video, but why I don’t have same settings, I am missing chart settings and searching with channels, I have Obd11 Ultimate?

@Frostensen 5 ай бұрын

Is there a free OBD app that can show boost pressure specified vs actual in graph mode?

@Jimenez1904g 7 ай бұрын

Did they change the neame or number to the boost pressure

@Picklerick1000 Ай бұрын

Charts don’t pop up for me, do I have to enable something

@robbylebotha Жыл бұрын

I dont see these options in the app for my Vw Mk7 Gti, I got my OBDEleven adapter last weekd and installed the latest app. I have done about 6 adaptations and some long-coding so Im proficient at poking around. Maybe they removed this. When you go to charts, you have to add a value, from a drip down list with MANY options, there is no option to type and search or add a chanel number.

@robbylebotha Жыл бұрын

Update: I eventually found it. 1. Goto charts. 2. Click add value. 3. First drop down, scroll till you find "Charge Ctrl", if you are looking for boost pressure, look for options that say "charge". 4. Second drop down, look for actual value 1, at the bottom not the top options. 5. Then look for specified value 1, again at the bottom not the top. Then you can observe what the engine is asking for and what is being produced.

@tedjohnson64 3 ай бұрын

Thanks for sharing those detailed mk7 steps!

@robertwotring7318 Жыл бұрын

Where do you get a list of channels for live data? On my Touareg it had all the live data as checkable boxes. My Audi wants channels like yours

@finestpker 6 ай бұрын

Did you find a fix?

@robertwotring7318 6 ай бұрын

@@finestpker not on the A3. It’s a little more basic i just have to search channel by channel then mark the ones i use in a notes folder. Tedious but it’s an older Ecu apparently

@darrellroireau4061 Жыл бұрын

Thanks for the info it helps a lot. I just did this test and my boost actual was zig zagging so drastically on hard pulls. Does anybody know the cause?

@davem4131 4 ай бұрын

How do you know what channels are what?

@florinflo2531 2 жыл бұрын

Do you have the pro version or the ultimate , thanks

@drsnowmon Жыл бұрын

I have the pro version but it doesn't have the live data in graph form

@lmao7360 Жыл бұрын

I dont have datalogiens available to me. Im on pro version on iOS.

@SHONGERMAINE 7 ай бұрын

I think that specified and actual values are wrong there. At idle, you are going to be pulling a vacuum, 350 mbar. You have to be onthe throttle to get 970 mbar. Looks like you're getting good boost