Audi Q7 (2016-present) - New Battery Install [passenger footwell] & Registration

Рет қаралды 51,310

Күн бұрын

Learn how to install a new 12V battery in an Audi Q7. We’ll show you how to replace/change/remove with simple tips and tricks to help get you started!
Tool List: 10mm wrench, 13mm wrench
Click this link to determine which battery your vehicle needs: www.autobatteries.com/homepage
Although this video may provide you with the basic procedures for this 2019 Audi Q7, we recommend that you check with the vehicle manufacture's step by step instructions found in service/repair manuals for the vehicle you are working on because some year/model procedures may be different than the vehicle in this video.
Even if your vehicle did not come with an AGM battery, you can upgrade to an AGM battery for up to 2x the life. AGM can be found at most retail outlets. You can learn more about AGM here: www.autobatteries.com/battery...
The end of this video will show you how to register the battery with the vehicle. We are using an Autel BT608 tester tool with registration capability.
The use of a memory saving procedure will keep the memory alive on the vehicle's computer during the battery replacement procedure. Referring to our Memory Saving video will provide you with various memory saving procedures that can be used according to vehicle manufacturer's requirements. • Vehicle Memory Saving ...
Always wear safety glasses and gloves when working with or near batteries.

Пікірлер: 29

@unclejamesx9808 Жыл бұрын

One of the most detailed videos. Thanks

@TheBatteryShop Жыл бұрын

Hi - You're welcome and thanks for watching!

@kamranjamil1081 Жыл бұрын

Very Helpful video !

@TheBatteryShop Жыл бұрын

Hi - Thanks for watching.

@azthundercloud Жыл бұрын

they finally made the battery replacement less of an ass pain.

@TheBatteryShop Жыл бұрын

Hi - Thanks for watching and sharing your opinion!

@1shakezula1 Жыл бұрын

Video title is wrong. The first generation Q7 (ended in 2015) has the battery located under the driver's seat. Title should be "2016 - Present", not 2010.

@TheBatteryShop Жыл бұрын

Thank you for catching our mistake. It is updated now.

@WHITE2K Жыл бұрын

Replacing the battery took less time than searching for my 10mm sockets.

@TheBatteryShop Жыл бұрын

Hi - Thanks for watching and sharing your experience!

@frankie1g2 5 ай бұрын

Em what about the donor battery when to remove

@mabel168 Жыл бұрын

What else can you use as host battery? can I use NOCO boost plus jumper battery? Thanks

@TheBatteryShop Жыл бұрын

Hi - Thanks for watching! Check out our video on memory saving for other methods. The link is in this video's description.

@Lionheart_He-Man Жыл бұрын

Is there any way to check the power level of the current battery installed via the MMI software or some external device? Thank goodness, this process is less of a pain compared to 1st generation Q7, the driver’s seat had to be partially removed, come on Audi 😦

@TheBatteryShop Жыл бұрын

Hi- Thanks for watching! Battery testers can be attached to the “jump posts” under the hood.

@Lionheart_He-Man Жыл бұрын

@@TheBatteryShop Ahh, you mean the OBD Port? Is there a battery tester that you recommend? Lowest price and good.

@ziadtariq3986 2 ай бұрын

Thanks for the video, the battery looks like too small for such a big engine , can be replaced with a bigger amp like 105ah or it’s going to make any problem with the coding?

@TheBatteryShop 2 ай бұрын

Thanks for watching. It does appear that a 105AH will fit into some model/year vehicles. I would check the tray size to confirm if a larger battery would fit.

@ziadtariq3986 2 ай бұрын

@@TheBatteryShop thank you very much for your reply. All best

@gurris1 Жыл бұрын

Does anyone know if the battery needs to be programmed Does anyone know if the battery needs to be registered?

@TheBatteryShop Жыл бұрын

Hi - Thanks for watching! We suggest that you check with the vehicle owners manual or a service/repair manual to find out. You may also like to check out our video on battery registration. The link is in this video's description.

@alicialewisable 5 ай бұрын

Your link for the battery says page not found

@TheBatteryShop 5 ай бұрын

Thank you for bringing this to our attention! It should be fixed now

@williamhammer5470 8 ай бұрын

The battery is located in front of passenger seat in floor not drivers seat on 2018.

@TheBatteryShop 8 ай бұрын

Hi - Thanks for watching and sharing your information! The catalog folks should take note of that.

@bbliss1228 8 ай бұрын

They said the right, front seat, ie passenger side

@williamhammer5470 7 ай бұрын

I did everything thing you said to do and ended up with 43 codes all but one I could clear which was Audi pre sense it’s no longer working ????

@williamhammer5470 8 ай бұрын

Don’t believe this guys bullshat I did everything he said and still ended up with a bunch of codes. What he doesn’t tell you is the computer in car has to be reset for a non Audi brand battery including serial number for new battery also have to have adaptive cruise control reset by dealer. You might as well just have dealer do job.

@TheBatteryShop 8 ай бұрын

Hi - Thanks for watching and sharing your experience!