Audi S4/S5 B9 | Engine Data: Power + Torque Gauge | G-Meter

Audi S4/S5 B9 | Engine Data: Power + Torque Gauge | G-Meter | OBDeleven OBD11

Рет қаралды 29,246

Күн бұрын

Do this at your own risk. I’m not responsible if you fck something up.
I have tested the updated Rainbow Module “Pro” version which makes the G-Meter work. Would NOT recommend the “Pro” version if you have the Adaptive Suspension. You will get a “Suspension Malfunction” fault if you do.
The module installed in this video is the 1st gen box, not the “Pro” version.
Follow me on Instagram: @ct_garage_colorado
Car: 2018 Audi S5 Sportback
OBD11:
- Acceleration Data: YES = G-Meter
- Engine Data: YES = Power + Torque Display
OEM CANBUS Pins/Wires to remove:
- Pin 18 (Red/Blue)
- Pin 54 (Brown)
- Pin 31 (Orange/Brown)
- Pin 13 (Purple)
Rainbow Sport Module Pins/Wires to be inserted:
- Red/Blue plugs into Pin 18
- Brown plugs into Pin 54
- Orange/Brown plugs into Pin 31
- Orange/Green plugs into Pin 13
See Yaode Chain's YT Video to activate shift light / RS display, if interested:
• Engine Data & RPM Flas...

Пікірлер: 47

@Race_4_Life 2 жыл бұрын

Ok to everyone interested, I own S5 Coupe with adaptive suspension and today installed rainbow pro unit with G sensor and everything works perfectly. Did get a fault at the start with suspension issue but there are few additional steps to be performed and it will work. 1 Turn on the car 2 Put it to neutral 3 Turn left direction 4 Press and hold return button for 15 sec [while holding rpm will go to 1.4k once you will let go of the button all is done. Enjoy

@charlesasante9731 3 ай бұрын

@brandyn9909 3 жыл бұрын

i cant believe you got this! you're an audi legend

@jsrebuilds3951 3 жыл бұрын

You were always an electronic genius...

@meandmy66 3 жыл бұрын

Thanks for the update on the Pro. That sucks on the error!

@francescoferrara733 2 жыл бұрын

with this box, in addition to seeing torque and acceleration, is it possible to activate the sport layout?

@johnspooner8468 2 жыл бұрын

Do you know was the issue with adaptive suspension resolved on the pro unit and also I’ve noticed in the video torque goes to only to 86% is it the reason you were on a higher gear or is it an issue with the unit

@olivergerdes7838 Жыл бұрын

Can you make an Installation guide for the Pro Model? My Module has 6 wires instead of 4.

@jaimem2729 2 жыл бұрын

Sooo... can i still buy the pro version of the box without activating or using the G meter ?

@cryosag Жыл бұрын

Great video

@watchdark1738 Ай бұрын

I know this is old but I’m trying to get the shift lights and I have everything else working and switched to the rs5 cluster but the shift lights alone aren’t working

@cobaltpica Жыл бұрын

how go enable the reading on the right bottomthe boost gauge?

@jakubpazdzior6831 2 жыл бұрын

can you send a link to the module?

@Superkolos 5 ай бұрын

Nice Carsound 👌

@MvP_Banny Жыл бұрын

It will be same think on 21 s6?

@nonamenoname4641 Ай бұрын

Is the procedure the same for the A7? Same wiring?

@MaanzMotivation Жыл бұрын

Will it work in my A5 1.4 tfsi

@AirBastarrica Жыл бұрын

Where do you live? I was wondering if you could do this for me in my B9 S4

@icecubeninja7932 3 жыл бұрын

Also do u know if you’re able to have the shift lights without the RS display? I also don’t want the RS display, but obviously would like the shift lights, especially in the HUD.

@chthan3o3 3 жыл бұрын

Only way to get shift lights is to convert to the RS display via OBD11

@fhash_4827 3 жыл бұрын

Can you do a full acceleration pull to check something for me? Under full throttle My torque gauge only hits 86 percent. Power gauge goes full 100 percent. So either something wrong with the gauge, or my car isn't making full torque. I am running the apr stage 1 tune and my car feels perfectly fine. I feel I would be able to tell if my car was down on torque.

@chthan3o3 3 жыл бұрын

Mine only gets to 86% as well. Must be the box. I’m running EPL. These gauges are more for aesthetics than anything else tbh.

@lakumrakesh8651 6 ай бұрын

Hey I need your help, I was following your video and installed the module it worked well later I got a electricalmalfunction popup on my dash board, so decided to uninstall the module while doing that got spark when removing the pins from the connector, and my car won’t start and also unable to lock the vehicle, please guide me I need your help as you already figured out how to start the car back. I have A6 2019.

@ryan18462 5 ай бұрын

Same thing happened to me last week. Any luck fixing the issue?

@cryosag Жыл бұрын

Help recieved a different version with the gmeter and wired, fairly sure correctly but car wont start … how do you get the cover off the fuse box, just a screwdriver to pry the circle off then the torx 30T ? Also are there spare 20A fuses in the fuse box .

@ryan18462 5 ай бұрын

Same thing happened to me! Any luck figuring out what was shorted and where?

@icecubeninja7932 3 жыл бұрын

Very interested to hear about the G meter!

@chthan3o3 3 жыл бұрын

See updated description above

@georgedesouza8937 3 жыл бұрын

@@chthan3o3 thanks I have adaptive suspension so thanks for letting me know 👍

@shichaowei678 3 жыл бұрын

My car has dynamic susoension is there any way to solve malfunction issue?

@chthan3o3 3 жыл бұрын

I chatted with the seller, they told me no. You will not have the issue if you get the older box like the one installed in the video

@rennfisch1996 3 жыл бұрын

At first, nice video. I just ordered this Module for my s5 convertible, i already coded the Engine data display and was disapointed it didnt work. Is there any wiring diagramm in the box with it or did you figure that out yourself? And must it be connectet with the control unit under the seat or can i connect it anywere else with the canbus?

@chthan3o3 3 жыл бұрын

The rainbow module has to be installed on the CANBUS connector as seen in my video. Unfortunately my module did not come with instructions, which was why I made this video to help others. There is now a new module available from certain sellers that will supposedly make the G-Meter work. I’ll test it out once my new module arrives

@rennfisch1996 3 жыл бұрын

@@chthan3o3 Okay. Do you know the Name of that Control unit? Just in case it's located somewhere else in the concertible

@chthan3o3 3 жыл бұрын

Still called the Rainbow module. Some sellers will state “Pro”. Just have to look through the listings and look for ones that say “G Value” in the photos

@alejom2460 3 жыл бұрын

🙌🏻🙌🏻🙌🏻🙌🏻🙌🏻🙌🏻🙌🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻 thank you bro

@meandmy66 3 жыл бұрын

what store are you getting the pro version on aliexpress?

@chthan3o3 3 жыл бұрын

Let me test it out to determine if the G-meter will work first before I share the info. Will create a new video if it’s successful

@chthan3o3 3 жыл бұрын

See updated description regarding error above with new module. Seller is VW AG Store if you still wanna do it

@MaxStudioCG2023 3 жыл бұрын

bro ..any way to do it on a4 b9 (i have the normal virtual cookpit with the 2 watch layout) not the S layout

@johnfitzgerald1931 3 жыл бұрын

Do you know why your Torque number is only going to 86%? Are you tuned?

@chthan3o3 3 жыл бұрын

EPL tuned, no idea why its at 86% at WOT.

@johnfitzgerald1931 3 жыл бұрын

I have that tune as well. That’s a bummer it doesn’t go to 100.

@nonamenoname4641 Жыл бұрын

Lol videos like this just make me think, may as well buy the right model lol

@chthan3o3 Жыл бұрын

Feel free to pay over 20k for the RS model for this feature

@nonamenoname4641 Жыл бұрын

@@chthan3o3 wouldn't just be for this measly feature lol, but frankly, if you can afford something without breaking the bank or even 3% of the bank, that's a no brainer. Some people have different lives than you, and that's ok too.