I've just met Marian in Augsburg Germany and used this tool... It's a "cheap" piece of art that tool. In 2 minutes he removed that bolt, without any problems, without using any heat or even WD40. And the cost to make it was under 20 Euros. It'a fenomenal that tool, and Marian is a great man.
@HassanRida-hd1lq7 ай бұрын
Hallo Ich brauch eine wie viel hatte gekostet?
@paulibanez42246 ай бұрын
If this ever goes into production, I’ll be sure to get one!!!
@kevthegame11 ай бұрын
That's really awesome
@tigermoth31943 ай бұрын
Fabulous hand made tool 👍👍 I've made a similar but much simpler tool (because I'm not an engineer) to do the same job. It consists of a 120 mm length of metal box section, some M10 threaded bar, two 'long' M10 connecting nuts (one for connecting the threaded bar to the pinch bolt and one used for 'pulling' the pinch bolt through the metal box section) and a couple of M10 thick washers/spacers, all costing approximately £20.
@Coded19871Ай бұрын
Any chance you could send over the parts you used so I can make one. Would really appreciate it.
@tigermoth3194Ай бұрын
@@Coded19871 Not sure how I can 'send over' the parts I used? but all items used are described in my post above 👍
@Brayco8644 ай бұрын
Brilliant idea
@user-kd8ld8uj2y9 ай бұрын
круто! молодец!!
@codprawnАй бұрын
Brilliant. So simple. Why do mechanics panic with this job? I am going to do my brothers audi a5 after 3 garages tried and failed. I have my own lathes and milling machines so was going to make a tool. As it is so simple won't take long and no need for my fancy machines. The obvious trick is to deliberately shear off the head of the stuck bolt first.
@mariangeorge367Ай бұрын
Exactly. It's easier to pull it out than to push it through
@WozzaD798 ай бұрын
What threads do you need. Doing my b7 very soon and looks like it will save me a day!
@draganstankovic6290 Жыл бұрын
What is the diameter of the external thread on the rod?
@WulfThierfelder-fe7xu8 ай бұрын
Hallo! Wo bekomme ich dieses Werkzeug her?
@walterweber5293 Жыл бұрын
Good job! What car is shown in the video?
@mariangeorge367 Жыл бұрын
My car, Audi A6 C7, 3.0 TDI
@walterweber52939 ай бұрын
@@mariangeorge367 Nice tool, but unfortunately it will not work at my car, A6 4F, there is no space for such a tool, because the steering arm blocks the path.
@piotrkorzynski8 ай бұрын
Looks really nice 🙂What is the thread of upper wishbones bolt?
@mariangeorge3678 ай бұрын
M10 on Audi A6 (the one shown here)
@mariangeorge3678 ай бұрын
On the other side you can make also an M8 thread
@piotrkorzynski8 ай бұрын
@@mariangeorge367 is it m10x1.5?
@mariangeorge3678 ай бұрын
@@piotrkorzynski yes
@petermeins31372 ай бұрын
Hello, what kind of thread does the pull spindle have? M16 or M20
@obihornchen65082 ай бұрын
based on the nut being 30mm, it's probably m20
@blargh614329 күн бұрын
Do what i did and snap both ends of the bolt and then bash it out with a rock and a socket extension
@fire67152 ай бұрын
Hy verkaufst du dieses Werkzeug auch hätte grosses Interesse.👍👍👍👍👍
@MadRex22623 Жыл бұрын
Where did you buy the tool?
@mariangeorge367 Жыл бұрын
I didn't buy it. I made it myself at my workplace
@rroberts2355 Жыл бұрын
You should make some more & sell them, a great tool made light work of a stubborn bolt.
@ArtemLokhovitskiy11 ай бұрын
@@mariangeorge367you are sitting on a gold mine. So many Audis with this problem and so many frustrated owners and mechanics around the world! Start making it and sell. I'm sure it will be popular.
@user-hg3nz3mi1p8 ай бұрын
@@mariangeorge367 Great job. You should make that tool and sell it to the motor trade and the general public, you will make a fortune! 👍
@Nunu5TV8 ай бұрын
Servus! Ich möchte auch etwas kaufen von dir! Kannst du mir sagen was muss ich machen? Kann ich meine Handy Nummer schicken und kann wir gleich auf WhatsApp schreiben