And me who bought id4 1gen 3 months ago: thanks👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻❤️❤️❤️

I just purchased an iD4 for voiceover work. It’s beautifully made with clear sound and zero line noise, replacing an older iD22 that did great service for many years. Recommended 👍🏼

Never see an so good video to explain an product, thanks you a lot ! Audient seem like very very huge brand in music industry, I definitely recommend the ID14 MK2 or EVO 4 depend on 2 line in mic or 2 line out headphones, Its depend, thanks for this content, excellent video 📝✅

What makes your product and brand look superior is your active engagement in the comments section...shows your commitment....thanks to the team behind it. Will definitely consider buying your product in the future.

Very happy With mine. Forgot about that "press ID button and use knob" feature .. gotta try that in the morning ! Like a micro DAW controller!

i just ordered the id4. Loved the Kali audio studio monitors in this video :D, i own the lp6 v2 and those are amazing !

Great video. Thanks

Will this audio interface run on Windows laptop ? And the Reaper daw will work on this interface ? I'm a fully Beginners ...I never use audio interface

This gen still comes with the burr brown converters? Your website doesnt mention anything about converters. Wanna know

Hi Dear Audient, I've used Audient iD4 for 2 years now it's amazing. Now for this Mk2, I'd like to know could we adjust the dual headphones output level seperately?

It will work on Windows ? And repar daw will be work ?

really just excited for you to make an upgrade to the id44, or offering like an id88. like. a new high end one so we can just use it like a proper high input and output converter. Would love an all in one system like the prism titan for example. I'm sure you guys can match that sound quality

Just started using the ID4 mk2 with a Lewitt LCT 440 Pure mic and it sounds so sweet. Pretty much no noise, around -39db in a real world test in adobe audition but noise is not very audible. Great preamp and super happy so far.

What interface was used to make this video?

Hi! On this video you mention that in older computers with USB 3 ports you need a camera adapter kit and a powered USB hub; but on "How to set up an Audient iD4 MkII Audio Interface" you mention just a USB A to C cable. Is the latter option enough? What would you recommend? Thanks.

Hi! Can you record a guitar and vocal at the same time? Does have a software mixer the same as ID14?

Besides an update in functionality do they offer an improvement in sound quality compared to the previous ID4?

Hey thanks for the video, will I come across noise or distortion if I'm using low impedance (40 ohms) headphones?

I have had the Id4 MK2 for 6 months and am very impressed. I bought some DT990 pro headphones which run at 250ohms. They are a fair bit quieter than my 64 ohm previous headphones. Will a headphone amp improve sound quality? They go loud enough when I crank it but wondering if a preamp will make a difference. Thanks

Hi, Great video to explain the features. Will this work stand alone (as a mixer) without the computer using a power bank or external charger? The MOTU M2 and M4 have stand alone functions. Can we connect the left and right outputs of a guitar effects processor to the ID4 to get stereo output from the processor?

Thank you for this presentation. Could you please tell me if the Audient iD4 MkII works correctly (enough power) to use a headphone Beyerdynamic DT770 Pro in 250 Ohm ? Or, should I choose a 80 Ohm version ? Thank you !

Hey Audient! Can the 2nd input be used as line input as well? Or is it only instrument input? I intend to connect my Yamaha PSR E323 keyboard to the 2nd input. Will it work?

Hi there i have a simply question for you, since i use a desktop i don´t have USBc ports, i would like to buy the interface and as is written on the specs if i don´t use the USBc cable i don´t be able to use the max provided headphone amp, my question is if i use an USB 3.0 cable to USBc do i still get the amp max level for the headphones or not?

Can I use auto scrolling thing with cubase 11 pro for windows for automation, move the timeline back and forth etc..? If yes do I need to activate some settings in cubase 11 to make it work?

for Sound quality will it matter if i use the included rca cable that came with my studio monitors to the headphone output of my interface VS two RCA to 1/4"TRS cables?

its the same AKM conversor?

Hey there. Have a question regarding the headphone impedance. I have Audio Technica Ath m50x and Beyerdynamic DT 900 Pro X. Both of em has an impedance below 50ohm. I read in some forums that it changes the frequency response and might damage the drivers. Will such thing happen. Planning to buy the iD4 soon. Also is the Mkiii series coming anytime soon. If yes then would love to wait❤

New knobs!!!

Can we connect line in inputs (outputs of keyboard/synthesisers) to JFET Instrument Input port, does it get enough gain ?

Hey Audient, question, I need only 1 preamp so the id4 would be perfect but I want the highest possible quality for recording vocals and also for mixing, is the converters and the preamp in the id4 mkii better then the id22 for recording and mixing quality? I don’t mind paying 800 bucks for an id22 for higher quality sound but it would be extremely useless since I only need 1 input, hope you guys reply, thank you

Hi, thanks for the video! I wonder if it is possible to control the volume level with apple keyboard. Many external audio interfaces has volume controls greyed out on MacOS. I wonder if that is the case for audient as well? Googled a bit but can't find something about it, would really appreciate if you could answer!

This is awesome, I have the iD14 and I can’t wait to hear what the MKii can do🔥🔥🔥 What’s the price point and when is it gonna start shipping? 🤘🏻🤘🏻🔥

This was a great video! Quick question, what recording app was being used on the iPad? I’m torn between this id4 mk2 and the evo 4! 😭

This is what I will upgrade to from my old ass Line6 UX2 😁

I almost would go down to the first gen because I like the silver finish much better. Are you guys making any different colors?

If you press the volume knob instead of turning it, the volume switches between low and high - is this observation correct or is it something more complex than that going on? it wasn't covered in the video, thanks.

Can I use the JFET Input and the Line Input at the same time for stereo recording?

Can I use both headphone output Jack's at the same time? For example if I wanted to monitor with my studio headphones but use the second jack to connect to the microphone input on my nikon dslr camera to record a song? Alternatively can you play through your studio monitors and thought the headphone jack into a camera at the same time?

How can i connect a midi foot controller (roland fc200 or behringer fcb 1010) to control amplitube or likewise? Does a midi to usb onto the pc would work?

Hello, i have a question regarding the Audient ID4 MKII, can it fully drive a 250 OHM headphones (DT770), because I heard from voice artists that they might need an amp?

Is it possible to use the ID4 outputs to route a strymon big sky pedal for example to send it back in via an input?

Is it better than uad or Apogee or antelope or prism sound or rme or avid?

Any plans to bring +10 db boost in software to the preamp like in the ID14 software?

Would be a great idea if you could update the antiquated drivers.

Hello Audient, can I use the ID button to sum the outputs (headphones/speakers) to mono?

what about controlling headphone volume independently of monitors? I see there's no headphone button on this one like the iD14.

Hello ! I want to buy one but I'm not sure about the usb cable. My laptop doesn't have an usb-c port . If i use a usb c to usb 3.0 cable will it works? Will i lost quality or be ok to use the 48v phantom?

Can you use this with headphones significantly lower than the maximum impedance, say 32 Ohms like my Sennheiser HD 449s, without blowing out the drivers or distortion at normal levels?

Can you please do a comparison of this Vs the Evo 8 because I'm inclined to the Evo 8 and would want to make an informed decision

if i plug in one cable with usb C in one end into the interface and the other end of the cable which is USB 3.0 type A into my PC is it also going to make the headphone output weaker?

Can I adjust the volume of the output signal through my computer the same way I can with the evo 4?

Ive been actually looking for the funtion of pressing down own the main volume knob. For me it changes the volume in like two steps --> louder or quieter. But I didnt find anyhting about this feature... Im using the Id4 Mk2

hello, can Audient id4 play sci-fi at the same time with DAW and KZfaq or video editing program, can it work at the same time?

Hey. I wanna get this bit I'm hearing it's not good when used with very low ohm headphones. I have Hifiman Anandas and they're 25ohms. Will that be ok?

If I'm only recording one thing at the time and only listening through it on my own (headphones or monitors) is it any reason to pick up the id14 instead or is it only a waste of money? Couldn't some features of the software mixer be beneficial also for the id4? Like see the input/output levels? Are all the input/output specifications exactly the same otherwise (same quality in recording and monitor/headphone output)? I thought so but for example the headphone specification differs and made me wonder. From Audient homepage: Headphone output - Frequence response: id4: ±0.1dB 10Hz to 40kHz id14: ±0.25dB 10Hz to 40kHz Even if the above is the case, I know it's not hearable but still wonder why there's a difference at all if they should be the same.

If I'm playing audio through both Studio Speakers AND Headphones, how do i lower down the headphones volume only without affecting the main output ?

I checked almost everywhere but no where it's in stock... I just pre-ordered with Andertons and waiting for delivery expected end Feb.

cannot find the jfet input's impedance.. is it 1Mohm? and if it is, is it changeable via software?

I have the 1st gen id4 that I just recently dug out of storage to use with my M1 MacBook Air but I don’t see the dedicated mixer option. Is that not supported with my version of the id4?

Hello. Is it possible to plug in a keyboard like the Korg D1 with this interface for recording? :-)

good afternoon, could you help me find the cables to connect the adam studio t5v speaker through the Audient iD4 MKII, do you have any Amazon links to buy?

Hey! Can the AUDIENT iD14 mkii be sufficient enough to power the NEUMAN 103 at an optimal level?

Can the ID button be assigned as a talkback button with my built-in laptop mic?

Hey. I finally got mine today. I have a question for you if you don't mind. I can't seem to find a solid answer online. If I use the outputs of this interface and run them into a headphone amp (Topping L30) do I have to worry about the impedance if I have headphones with lows ohms? I don't know if the impedance works the same way with the outputs, or is it just the headphone socket? Thanks in advance.

hey im so confused when i put monitor mix all the way daw i hear everything loud so should i use it on middle? for true sound level? coz it confuse me so much

Здравствуйте, подскажите пожалуйста sound Id reference, которая ка бы идет в подарок к звуковой, там лицензия вечная, или только на некоторое время?

Is it possible to adjust the volume of the monitors and headphones seperately?

My older audient id4 dont remember the volume when my laptop gets in sleep mode, so i have to turn it up every time again. Is there any solution for that or is it possible with this version?

Is there a feature/spec quick comparison sheet for id4 vs id4 mkii?

the evo series looks so much nicer, are these converters really that much better?

Can I hear the audio from the DAW in both headphone's channel?

I need to know which monitor stands were used to hold the Kali's in this video please!

can i connect the ID4 mk ii to my windows pc 3.1 Gen2 type-c connector?

The JFET(instrument) input on id4 mkii is a balanced input or unbalanced ?

Hi! I am new. I recently i got the iD4 MKll and i love it. But I had some troubles: I can´t open the iDmixer, I think is important, I've tried like 3 times. The second is about the sound on youtube, sounds like weird, the music sounds decent but the voices sounds like very hide or in a other place. I had gamer headphones, i used to use them with another interface, is that a problem? . In the DAW goes well. Hope you can help me, thanks!

Very cool where can I buy this? I'm from Kazakhstan

Dear audient, i have a question. I want to record my DJ performance from my Pioneer mixer. That Pioneer mixer has two TRS output (L and R). So where should I plug it in audient id4? Can I plug it like this : L in Mic input, and R on Line input?

Is it possible to connect two XLR microphones with an adaptor of some kind?

Wird es auch ein ID 22MK2 geben mit DSP? bittttteeeeee

Hi, bought the interface 2 days back. From yesterday I have facing this issue. When connecting to my laptop using USB C, there is a tick tick sound coming from the interface (not the speaker or headphone which are connected) and all the 10 leds start going on and off. Some this stops and I can use the interface normally, but other times it goes on for 2 or 3 minutes after which I unplug the device please help.

Hi I'm a newbie in this field. I got SHURE SM7b mic and wanna buy iD4 MkII as the audio interface. Is it provide enough GAIN directly to SM7b, or I have to purchase another preamp? Thank you so much!

How to connect this audio interface to a laptop not having c type port only having usb 3.0 (A type) USB. Kindly let me know if using data cable coming with android phones i.e, (A type to C type) would suffice or not???

Dear Audient, can id4 store the last volume adjustment after power is cut off (S4 deep shutdown PC, with power off to USB ports) or do I always have to adjust volume again? Sending PC to normal S3-shutdown is a solution, but there is 20W power consuption all time then. Work on more reliable drivers, especially focus on wake up after (deep states) standby. The device often loses its outputs after wakeup and PC reboot or pulling USB jack are the only solutions. For mkiii a power on/off switch and seperate Volume knob for headset output would be nice. A 2nd Micinput 3,5mm audio jack 4 pole is a must for PC headset with mic. Streamers would love it. Automatic Mic in Level calibration would be nice to. And more easy software for PC configuration, Loop-back mixer is to complicated. And a much better and finer level indicator. Price it 50% higher and then it´s an ideal tool for streamers too.

I connected the audient id4 mkII with a usb 2.0 cable it showed 500mA and the interface works, can I use this or something will be damaged?

Is it possible to use ID4 with other DAWs viz. Studio One?

Does JFET preamp mean I don`t need to use a console emulation plugin for coloring or is it a different thing?

Hello Audient, can you please tell me if I can connect my Marshall AVT 50 using the emulated DI output, where is the recommended connection to an input with an input impedance >20kΩ to the line input of my ID4 mk2, and which cable is better to use?

I have installed an ID 4 software for my ID 4 Mark II and I have an icon on my macbook, but nothing is opening when i click on the icon! i can not see any software mixer, please help. Thanks

Can I run my guitar through Bias FX from my laptop to this interface , then to a reamp box and then to my guitar tube amplifier ?

I'd like to record a line signal from a TE Op-1. Is there a possibility to record a stereo signal? also, is there the risk that the 48v phantom could be triggered by mistake and produce damage to the unit connected to line input?

Can I use it as as DI box or Reamp ( Amps, Mics) ?

Can I connect my Yamaha e473 keyboard to Id 4 through instrument input??

Are the knobs as wobbly as they look in the video or is this a preproduction model?

Just got mine today, but I'm disappointed that the headphone monitor function doesn't work at all with the headphones plugged into the Audient. My Mac is set to the Audient ID4 input/output, and although I can record to an application through the Audient, I can't hear myself at all. This would be even worse if I tried to use this for remote podcasting (I can't hear my guest, much less myself) and also would be terrible if I was trying to record a guitar into line input 2 because you can't hear what you're doing! Doesn't matter how loud I turn the monitors, it doesn't work. Too bad, the noise floor is pretty quiet. But I can only hear it if I plug headphones directly into the Mac, which sounds very reverby in my headphones while I'm recording, but sounds OK in playback after I stop recording. Is this normal and expected performance for your products -- why did you put a headphone jack on it if the headphones don't work?

Is there any diffrence in quality with the id4 mk1

when will this be available in Canada?

Hello, can the interface be powered by usb 2.0?

JFET DI input on ID 4 MK 2 has an impedance of 500 kΩ, but your other products have an impedance of 1 mΩ, what's the difference and which one is better?

can i record stereo? like from my guitar rig output to iD4 input? i worry about the balance or colouring front input (trs)& back input (xlr). can i get the solution?

Can you explain the price difference between this and the id14? Your competitors solo and 2 options aren't that far apart pricewise. Also why did you choose a JFET over a Mosfet on the instrument line in?