Audio Control EQ Tool, DSP for Amplifiers-ACPWorkbench

Рет қаралды 6,502

4 жыл бұрын

The ACPWorkbench Audio Effect Tool is an audio control eq tool developed by Arylic for audio amplifiers and audio receivers. This video will show you how to use and the main features.
ACPWorkbench audio control eq tool can adjust the loudness of specific audio frequencies to the listener's preferences and the acoustics of the environment, known as the frequency bands.
For example, an equalizer allows you to raise the bass while listening to dance music or add treble in a room that responds to low-frequency sounds.
📢Notice
✔This tool is only available for Windows PC
✔The first time you use it, we recommend that you save an original file so that the device can be restored to its default settings when you need it later.
✔When adjusting the EQ, please choose the Music EQ out panel, don't select the Music EQ Pre panel because it will mess up the basic treble bass settings.
----------------------
💡Learn more about the tool here: bit.ly/2E3EXu2
💡Find the tool here: bit.ly/2CTC0f7
💡Find the compatible products here: bit.ly/2BsXf7i
Subscribe us ▶bit.ly/3jE3GFV
📢Follow us
▶Website: www.arylic.com/
▶Instagram: / arylic_audio
▶Arylic Facebook Page: / arylicme
#Arylic#Up2stream#ACPWorkbench#audiocontrol#diyaudio

Пікірлер: 23

@yskang6438 4 жыл бұрын

Good job!

@mosesbartosch2367 3 жыл бұрын

Hi, could you please explain, which filtertypes (e.g. Highshelf, Subsonic, etc.) are supported?

@Arylic 3 жыл бұрын

Hi, we support 7 types, and all you mentioned are supported.

@TheRedNickBoy 3 жыл бұрын

I tried to enable S/PDIF for your S/PDIF Input Board, but it does not save the settings. The same goes with any GPIO settings. Is there someting else you need to do, appart from saving the conig to flash?

@Sebbl3 3 жыл бұрын

I have the same question, did you ever find a solution?

@goku21youtub 2 жыл бұрын

Hello i Just bought the 50+ , where do i find the EQ , thats the feature i looked most forward to.. AND important question: If i set up the EQ , will it apply for all input sources (line in, bluetooth, dlna ) ? or will it just work with the PC ?

@Arylic 2 жыл бұрын

Yes, it will work for all music resources. That's say it changes the output. For basic EQ, you can find in our 4stream app>device settings>EQ For specific EQ you cam refer to ACPWorkbench tuning tool: kzfaq.info/get/bejne/ra2lpLiAx9abeqM.html

@catalinolteanuvn 4 жыл бұрын

Have you managed to fix the bug and set individual volume for left or right ?

@Arylic 4 жыл бұрын

Hi Catalin, thank you for your feedback. I think each channel to connect the separate devices can solve your problem. If you have other issues, welcome email us!

@scottaberdonian7374 10 ай бұрын

Hi, can I change the delay between speakers?

@Arylic 9 ай бұрын

You can try this 3rd party tools for help: forum.arylic.com/t/add-airplay-to-your-android-phone/180

@layeredwork 4 жыл бұрын

Awesome! Unfortunately the software isn't available for macOS. 😥

@Arylic 4 жыл бұрын

Yes, it is only for Windows now 😅

@justinmurphy2227 3 жыл бұрын

Yes, no OS version but look what you can get for $65 from Amazon.com down from $125 simply because the packaging was damaged. Full warranty and returns are attached still! This is a full blown, Windows 10, mini computer that simply connects to the HDMI port to a TV or monitor just like a USB stick does to a USB slot. In fact, the PC stick is only slightly larger than a USB stick/drive! It has bluetooth so you can use a wireless keyboard and mouse combo. I use one of these in my car audio system along with TFT touchscreen monitor. Yes....a touchscreen! Simply put the stick into "Tablet" mode and it works. Perfect for when you're driving. By the way, they make a HDMI cable that lets you extend the port out so you don't have put the mini PC in to the side of the smaller screen. So my point here is for under $125, you can get this discounted mini PC stick and 10.1 touch screen monitor along with a full Windows 10 experience. Get that get this wonderfull "tuning" software for the Acrylic streaming device. It totally has changed mine and so many others car audio (home as well) experiences!!!!

@kristiankristensen9448 3 жыл бұрын

What is the name of the first track? 👍😁

@ewoutbuhler5217 3 жыл бұрын

So I can simply use this tool, also with the A50? That would be awesome!

@Arylic 3 жыл бұрын

Hi Ewout, this Tool only support our Up2stream V3 series and Up2stream Amp 2.1 now. We have plan to do some update then A50 will support, but no specific yet. Thanks!