wow thanks bro! saved me $1000 bucks at a dealer who was tryna rip me off saying i had faulty clutch plates! cheers!!!

Looks like you made this video 7 years ago and has answered a lot of questions for me to. I'm trying to send the morning and if it helps I'll respond again tomorrow. 🙏🙌

Still helping people till this day! Everyone said my clutch was blown but guess who’s pulling hard agin!? Me 😁 thanks brother!

This is the most helpful video I have seen for my problem thus far. I was riding my gsxr and my chain snapped and it took out the push rod with it as well. I was contemplating on if I needed to split the motor to put the new one in

Literally saving my life right now! I messed up my clutch today going to do everything you say tomorrow !

Bruhhhhhhh😆😆😆😆😆 thank you so much for this video. I have a 2005 gsxr 750 is my baby lol. So after Trying to do rolling burnout for my first time ever after my 3rd time notice my clutch handle had a lot of play on it so i took off home rite after lol. So I'm going up a hill and I noticed my clutch slipping on high rpm only. I tried adjusting it from the handle like 10 times and no luck at ALL . BUT after watching your video I notice I was doing everything wrong so I did exactly what you did on your video on my bike and man I tell you this my clutch handle and clutch grip couldn't feel any better my bike is actually running 100% better than what it was thank you so much for this upload. Clutch it's gripping 100%

Hey had trouble with my 750 learching foward while in gear(clutch in)adjusted the way you did it’s perfect now excellent video mate thanks

More helpful then any one the videos I watched. 1996 works the same way. Thanks 🤙🏻

Been searching for a video like this with a lot of details! Thanks a lot buddy! Safe riding to you and yours!

very informative. and this just helped me fix my bike. I was doing a sprocket kit and after I got this cover off I thought it would be a good idea to take the nut and adjustment screw out to clean them up and messed it up. it was kinda difficult to find a video on this. thanks for the information.

Your video helped me diagnose my GSX s750. Thank you very much!

Oh wow thanks man for the video. GSXS-750 is similar and there are zero videos on how to adjust the clutch on it.

That rod adjustment was very helpful! Thanks bro 🤜

This was the best video by far. Thanks brother for your help

hi brother, thanks for the help, this video help me so much, have a nice ride and take care greetings from mexico

Best how to on KZfaq. Very thorough thanks.!

because I have the same bike an my slips on high rpm my clutch has meat on it so it's not totally shot .hoping this does the trick.great video.glad you don't jump into a bunch of unrelated bullshit like other people do.look forward to more videos.

Great video but you don’t have to take any bolts off just pop the rubber boot off us a 10mm socket to just crack the bolt loose then adjust with flat head a quarter turn counter clockwise after you feel tension going clockwise

Good video man! I think it was great that you didn't edit out the missing rod... it helps show everyone what to pay attention too.

Great Video, have 98srad 600, clutch release is all the way at end of lever, gonna try this then see, thanks

Awesome video. Thanks buddy.

great video man!

what does the srping connect too mine was broken upon taking off

I have a 2002 GSXR 1000 I bought it brand new December of 2001 I opened the box it came in . until recently I have never had any issues with it other than new tires about every six months or so I've been pretty good to it but it's 2020 and father time is starting to catch up! recently I had to replace my chain and sprockets, and now my fork seals are leaking and as you all know motorcycle repairs can be very costly .The new mechanic I've been dealing with has been pretty cool and Fair on his prices but they always try to recoup it one way or the other he noticed my clutch cable had a lot of Slack an adjusted it but he also mentioned I would be needing a new clutch soon which worried me. I also never take anybody on their word I'm very skeptical so I did some research and purchased a new clutch cable hoping that would be the issue the same day after buying the cable I ran across this video and illustration on cable adjustment I followed your instructions word by word and to my surprise not only did I not need a new clutch but I now need to return the new cable I bought because my bike works like the day I bought it . thank you very much for your help and advice👍 truly grateful fellow motorcyclist

Thanks, just the vid I needed

Should the chain be bouncing about like that or does it need adjusting,

What would make my clutch pressure plate engages but doesn't go back in unless I keep my hand on it

Did you have a spring on your cam??

Saved be bro good looks

I really hope this helps. I rebuilt my water pump, and the clutch doesn't engage until its all the way out.

My rod is stripped where can I find a new one to get the tension that I need

Out of nowhere my clutch just stopped engaging completely, when i go in gear it would grind. I adjusted the clutch cable at the top a bit and ittl go in gear, but immediately stall out the bike instead of engaging smooth. Im gonna try this and if that dosent work im gonna replace the whole cable. Fyi i have a bit of fluid leaking from the bottom of the clutch cable.

I need to do this now. Great video

Could you adjust it from the bottom without replacing it?

I'm hoping this will be my clutch issue, i have a 2003 rgsx600 and the clutch cable just bounces around. Its not broke and that part at 2:18 still moves like yours does. The last guy said he put new plates in it and it still doesn't work, when I got it from him the lever just bounced around like it wasn't even connected.

Whats the name of that cover

10mm socket stuck over flathead works gr8

I wish i had seen this before reinstalling my sprocket cover haha

bro thank u!!!!

good video

Mine was missing the spring, the tab to keep the cable in, and a stack of little magnets fell from somewhere. I can't for the life of me figure out where the magnets go or if they're even supposed to be there

thanks good job.

Thanks dude

The book says screw in till you feel resistance, then, 1 and a 1/4 turn out.. You say1/4 turn out after you feel resistance , so I'm not sure, which it is or which works better

Good video man thanks for this.

I got my Gixxer a few months ago and it feels like it engages and disengages as it should but it feels hard to pull compared to a lot of other bikes. Do you think this would kind of adjustment would make the lever easier to pull?

Nice bike

I have a 2013 gsxr 1000 damn thing doesn't like to go to the neutral position is adjusting the clutch cable the issue you think?

Hi mate my cable is fully adjusted out on the leaver and the bottom nut all the way out can I still do this I think or do I need change the cable, just bought the bike and noticed it, it's under warranty or should I just take bike back n get them to change it

My man!

will help if there's clutch drag or slipping clutch? I mean if it's to tight will the clutch slip?

Hey would a quarter turn out be the same spec for a 2004 gsxr 1000?

Nice!!!!!!!

Hey, I have a 2006 gsxr 600 that I put new levers on... well I put them on and now the lever doesn't return like spring back into place. Any help? Thanks!

awesome

thank you!!

Thanks

Hey have a question what is the difference between the top cable and bottom cable for the throttle cable

after all of this did you spin the lever out a bit to achieve ur release point, i found when i dial mine out it releases higher

Might be a dumb question but whatever lol So after you take out the push rod, should oil come out since the rod is out?

Is your clutch handle hard to pull ?

Can I do this on a 2013 750? And no oil has to be spilled then ?

Did you actually replace the clutch cable at all?

Great video, would this be the same for my 2003?

change to 2nd gear. less bounce on your chain.

My whole clutch cover pries out when I pull the clutch in . Any advice ?

I need help doing this on a gsxr1000 I can't even ride because the clutch is fucked up.

I got 02 750 damn near same how do get stinking seats off?

Dude, i own a 2004 gsxr 1000 and have this issue too. Everything adjusted and new clutch install but no bite, can you help before i kill myself seriously

Question answered

Hey bro I have the exact same bike and I'm having problems with it and I was gonna ask you if I described the problem to you maybe you can give me an idea of what it is, any advice would totally help!

Do you have the mic in your mouth or up your nose? couldnt figure it out.

9:47 no, actually, we can't.... ;)

My motorcycle won't move in gear RPM do not move put new Clutch cable friction plates

Keep trying to do the same thing but can't get it to get into 1st without jumping and dying

it would have been nice if I could have heard a word you said....