Audison Forza for Cupra Born

Рет қаралды 377,855

2 жыл бұрын

Audison has always been driven by innovations! With the new Forza line, we are ready to upgrade the automotive audio of the future.
Discover more on Audison Forza: www.audison.eu/product_lines/...
Discover more on Audison bit Drive SW: www.audison.eu/bit-drive-soft...

Пікірлер: 35

@MGM_Strausberg 5 ай бұрын

I got this system in our Cupra Born. It's not cheap but every € worth. It sounds fantastic and got enough power.

@marcakko2010 5 ай бұрын

How much are we talking? Around for amp,speakers,sub, fixings and fitting £2,000 ? £3,000? be nice to know if possible be much appreciated 😊

@MGM_Strausberg 5 ай бұрын

Overall about 2.500 € for Amp AF C 8.14, Speakers APK 165-2 front & rear, 2 x APS 8D Subwoofer with custom housing, insulation of 4 doors and mounting of all components. @@marcakko2010

@jayaraman2775 Жыл бұрын

I love SUDISON ❤️

@donearl6675 2 жыл бұрын

😁👍❗

@djtj74 Жыл бұрын

What about warranty of the car, if you make these modifications?

@AudisonItofficial Жыл бұрын

All the modifications are full reversible. -Regards

@francisumeki 6 ай бұрын

Hi the dsp of the ap f8.9 can control an external 4 channel amplifier?

@SuperShinyRobot 8 ай бұрын

Please help, This is almost exactly what I'm building. Would you please answer a couple of questions about the subs, as with my very limited knowledge, they look under powered on paper? Why two subs? (Total rms of 500W when you only have 200W available bridged) Was this to match the impedance of the amp? (I.e 2* 4+4 in a parallel / series configuration gives us 4ohms impedance, where as a single will be either 2ohms or 8ohms) I'd really love to run a pure Audison rig, but only have room for a single sealed 8.(reflex is not an option for me)

@rasmushestegnu Жыл бұрын

Hi audison, i have Audison i my own Cupra, but what have you done to the center channel? If i do nothing, it will play musik from the original radio, but with a different time alignment than i have through my Audison Bit One. And if i disable the unit it self, by taking of the plug to the center speaker, the SOS system will imidiatly make an system error :( Hope you can help me :) Best regard Rasmus

@AudisonItofficial Жыл бұрын

Hello Rasmus, please use the Help button on audison.com/. Out technical team will support your request. -Thanks

@codexTu 9 ай бұрын

Hello. Did you solve the problem? I'm thinking to install the same system. You installed by your own?

@fernandosenape388 Жыл бұрын

Is it possible to buy the amplifier support plate? Thanks

@AudisonItofficial Жыл бұрын

Hello Fernando, that support plate is custom built by B&S Car Audio, the dealer from Hamburg that made that installation. -Best regards

@Corraconti Жыл бұрын

This kit is compatible with VW ID.3? or is it available in a specific kit?

@AudisonItofficial Жыл бұрын

Can be installed in a VW ID.3 easily

@thanuchpongtatiyaratanporn1038 2 жыл бұрын

Hi , Does new Forza can do the mixed source ? And for bridge mode , Will effect with sound quality detail ? Normally some said bridge mode is good only for Sub woofer or woofer , If do bridge mode with Mid and Tweeter will lost quality and detail and bandwidth.

@AudisonItofficial Жыл бұрын

Hello, Audison Forza features new bit Drive DSP software www.audison.eu/bit-drive-software/ that can do mixed source. Forza bridge mode doesn't not introduce any compromise for audio performance. -Best regards

@DER_OSMANE Жыл бұрын

The cars on the market have most and this makes all operation so difficult. A amplifier with integrated most technology would be so easy .... my audi a6 4f 2011 has optical fibers. I would like to have an amplifier that can do everything without bitDmi, is so outdated... at least one amplifier with 10 channels that also has a direct light wave connection, why can't anyone do it easily???

@robertthurston6858 Жыл бұрын

Ok, but how much is it for the total package ?

@AudisonItofficial Жыл бұрын

Hello Robert, for price please contact our distributor for your Country: www.audison.eu/find-distributors/ - Best regards

@stevendphoto 2 жыл бұрын

Will the new DRC AC work with an existing AP F8.9?????

@AudisonItofficial 2 жыл бұрын

Dear Steven, the new DRC AC works only with Audison Forza amps with DSP. -Best regards

@vk9423 Жыл бұрын

Exciting product …Can I use this DSP amplifier to power my Voce AV k6

@AudisonItofficial Жыл бұрын

Of course, Audison Forza are very powerfull, they can drive any speakers system. -Regards

@MrRugbymale 2 жыл бұрын

I am getting a cupra born v3 e boost can you upgrade my car I am in the UK

@AudisonItofficial 2 жыл бұрын

Of course, please contact our distributor for UK: Four 31 Stirchley Trading EstateHazelwell Road Stirchley Birmingham, B30 2PFUnited Kingdom Birmingham, -0044 845 4501594info@fourcaraudio.co.uk

@MrRugbymale 2 жыл бұрын

Do you have specification for the Cupra Born V3 77kw? And approximately cost I am happy to be used on social media and other channels to promote the brand and have decals present on my new car. I am a true audio fan

@AudisonItofficial 2 жыл бұрын

@@MrRugbymale please contact www.bs-caraudio.de/ for all the kit specification. -Best regards

@tomk7087 2 жыл бұрын

Great news, Audison keeps innovating! I am a happy owner of an AP4.9 bit. Will the new software also apply to this? I also own an APBX 10 AS2 Sub, can this be connected to an AF C4.10 bit? I do not see a Sub Pre-out…

@AudisonItofficial 2 жыл бұрын

Hello Tom, the bit Drive software is dedicated to new Forza with DSP amplifiers and for future products. You can connect your subwoofer box with AF C4.10 bit, it has the DSP output connector -Best regards

@tomk7087 2 жыл бұрын

@@AudisonItofficial ok I guess I will upgrade once it is available in the market…any hint of the pricing (RRP) of the AF C4.10 bit in Germany?

@AudisonItofficial 2 жыл бұрын

@@tomk7087 Dear Tom, for price and availability please contact an Official Audison delaer in Germany, you can find the list here de.audison.eu/find-a-dealer/ -Best regards

@AudisonItofficial Жыл бұрын

audison.com/forza-bit/