VW Polo 1.2TSI 1.4 TSI water pump replacement

No video

VW Polo 1.2TSI 1.4 TSI water pump replacement

Рет қаралды 41,591

AussieJarred

Күн бұрын

Пікірлер: 61

@DeAfleverkoning 8 күн бұрын

Thanks! Watched multiple vids for the part around 15min!

@AussieJarred 8 күн бұрын

Thanks glad it helped

@opanakeopanake1338 2 жыл бұрын

Brilliant, you helped out today when I changed mine. Best instructional video, you're a natural born teacher, well done. RE the vacuum I have a mityvac where would I plug it in?

@AussieJarred 2 жыл бұрын

Hi mate not a worry! Thanks for the kind words! Glad it helped! If you’re referring to the coolant vacuum, you buy the tool from ebay, it’s a specific tool that’s hooked up to an air compressor. I didn’t buy one in the end and it was okay, but lots of squeezing of the coolant lines and not sure if there was a bubble. But it was fine and has been ever since.

@ventsislavpendjurov5563 7 ай бұрын

Thank you very much for this DIY , especially for the torques . This is essential. !!!

@AussieJarred 7 ай бұрын

Great stuff thanks for the kind comment !

@neveshappy6790 Жыл бұрын

South Africa 🌍 . tanx helped me alot. Removed battery for better access, The pipe clamps were a bit difficult but job done 189 000km.

@AussieJarred Жыл бұрын

Great news glad it helped

@reimundlorenz7793 3 жыл бұрын

Top Video, i have changed it these Weekend.the Video was a good Help. Viele Grüsse from Germany

@AussieJarred 3 жыл бұрын

Hi reimund, Thankyou for the kind worlds glad it helped!

@philip.aocallaghan4602 3 жыл бұрын

Hi from Ireland...great video and explanation..keep them comming

@AussieJarred 3 жыл бұрын

Hi mate thanks kindly I hope the video helps 🙏🏻

@CKarhu85 3 жыл бұрын

Thanks for a great DIY explanation! 👍🏻

@AussieJarred 3 жыл бұрын

Thanks for the kind words hope it helped

@cyclonicleo 5 ай бұрын

Jeez, what a faff around just to change the pump. I'm nowhere near skilled to do this myself, so off to my mechanic I go.

@AussieJarred 8 күн бұрын

Anything is possible

@Rabeea09 10 ай бұрын

Cool guy , well done 👍🏻

@gazeema 5 ай бұрын

Great video mate! I know it’s been a while but where did you get the pump from??

@AussieJarred 5 ай бұрын

Thanks mate, I got it from run auto parts from memory. been a while as you say 🤙🏻

@bassnaticsteam6238 Жыл бұрын

Thanks alot for this video.... Helped

@AussieJarred Жыл бұрын

Great glad to hear! All the best

@michaelhou8792 10 ай бұрын

Absolute legend 🤝

@AussieJarred 10 ай бұрын

Thanks mate hope it helped 🤙🏻

@bebo104 2 жыл бұрын

Thanks. Great help to replace mine. Perfect.

@AussieJarred 2 жыл бұрын

Thanks mate! Glad it helped

@xtremeprojects_6850 2 жыл бұрын

Good job! Thank you 👏🏻. Only a question, is the pump synchronised with the camshaft? I don’t under everything you say about the cylinder no.1. Thank you!

@AussieJarred 2 жыл бұрын

Hi Thankyou! No it doesn’t matter, the procedure says it does but it doesn’t.

@sopcntuli5985 2 жыл бұрын

Great video, just used to replace pump. Could you send something on replacing the Polo 6 1.2 Tsi intercooler

@AussieJarred 2 жыл бұрын

Hi mate I reckon it would be easy enough to do yourself, you would just have to take the bumper off, I think there would be a fair few videos on this! Good luck

@mrsdoubtfire534 10 ай бұрын

My car only has 70 000km on it. And the pump is leaking. Last month it was the fuel sensor in the tank! What happened to German "quality"!?

@thabomkhwebane1934 2 жыл бұрын

Awesome video, the last part though haha "I believe in ya". One question man, after applying torque to the water pump, how tight should the belt be? Should it still move a bit or it should be super tight with no slack and movements on the gear? Thank you

@AussieJarred 2 жыл бұрын

Haha thanks mate. I think I spoke about it, it’s hard if you don’t have experience but have you ever tightened a motorcycle chain? Kinda like that. Not heaps tight but definitely no slack if you feel?

@thabomkhwebane1934 2 жыл бұрын

@@AussieJarred thank you Jarred. Do not have much experience with motorcycles but saw a vid on how the tension on the chain is adjusted and measured, I do have a rough idea now. Appreciate the work you did mate.

@pimpalation5392 2 жыл бұрын

Por que te abra fallado por usar otro anticongelante que no fuera g13 o por uso

@adavey3150 Жыл бұрын

Awesome video - thanks heaps

@AussieJarred Жыл бұрын

Glad you enjoyed it!

@abuasfur7334 2 жыл бұрын

Hello I have a 2013 1.4 tsi. No overheating or leaks but car runs just a little cold - a tad under 90c This is indicative of a bad thermostat right? How do I change the thermostat only? Cannot find any useful vids for my car.

@AussieJarred 2 жыл бұрын

Hi I would say correct

@abuasfur7334 2 жыл бұрын

@@AussieJarred Okay thanks - any idea who to replace it? I can't find any guides online

@piccions9391 2 жыл бұрын

Hi man, great video! Can you tell me how many coolant liters you buyed?

@AussieJarred 2 жыл бұрын

Hi I’m sorry I’ve forgotten please Google, it may be 4 or 5 litres from memory

@sidhuzharry 2 жыл бұрын

Hi mate, thanks for video, just after replacing pump, when i turned on my ignition it said SERVO BRAKE FAILURE. is it because of removing that hose or i did something bad ? I never had that error before

@peterdixon2035 2 жыл бұрын

Check the plug on the vacuum hose running parallel with the top inter ooler pipe or maybe the vacuum hose broke? It is for the brake booster

@esierisa 10 ай бұрын

How many tension you put in the belt?

@AussieJarred 10 ай бұрын

Just a good amount, nothing crazy

@esierisa 9 ай бұрын

@@AussieJarred thank you

@user-tk7ho2lx9n 5 ай бұрын

Hay 04e121600bl not AL is it gonna fit?

@AussieJarred 5 ай бұрын

Unsure sorry it’s been a long time since making the video

@bokzader 3 жыл бұрын

Hello, Do you have the part number ? Did you order the small belt apart or it comes with the waterpump? Thank you.

@AussieJarred 3 жыл бұрын

hi water pump part number: Geba Water Pump 10635 pulley belt: 04E121605L

@AussieJarred 3 жыл бұрын

04E121600A i believe was the actual pump number but you should see it in the video

@AussieJarred 3 жыл бұрын

runautoparts.com.au/catalog/product/view/id/34771/s/geba-water-pump-10635-1/%7B%7B%20url%20%7D%7D

@bombaysyeadsyead2581 Жыл бұрын

If the belt tension not kept means what will be happen bro

@AussieJarred Жыл бұрын

Hey mate, your water pump won’t work if the belt slips :(

@Kal-pw9vl 2 жыл бұрын

Hi mate, I've got the same ea211 engine in my leon. It's due a timing belt change, is it worth me changing the water pump at the same time as its driven by its own belt? Thank you

@AussieJarred 2 жыл бұрын

Hi mate, totally up to you ! I would definitely if they are the same age……

@Kal-pw9vl 2 жыл бұрын

@@AussieJarred If I choose not to change the pump as it has its own mini belt, and is on the opposite side of the engine from the cambelt. Would a failed pump throw the timing belt off?? A VW tech told me there's no need to chnage the water pump with the belt on these engines