FMF Powercore 4 Exhaust DRZ 400e Install and sound
Рет қаралды 21,254
9 жыл бұрынI bought a FMF Powercore 4 exhaust and in this video, I install it.
It was all pretty straight forward. I would recommend doing it if you want to save some bucks on installation.
After having it for a month now, there is no way I would go back to stock. It sounds better, is much lighter, looks nicer and seems to give the DRZ a bit more response.
I have seen a tiny bit of leakage at the connection to the header (it has a bit of a black mark), so you probably should put something in there to seal it 100%. It doesn't bother me.
Feel free to leave any in the comments and I'll try to answer them.
Bike -- 2009 Suzuki DR-Z 400e
Camera -- Drift Ghost S
Audio -- Drift Ghost Mic
Location -- Queensland, Australia
Facebook -- / aussyahwon
Music used with permission from Logan of teksyndicate.com. Check it out here: zweihander.bandcamp.com/
@johnnnie51 8 жыл бұрын
Thanks for putting this on here, I'm putting my FMF on now , wasn't sure how the spacer went, looking at your video it all makes easy sense. You sure helped me out with this one. Love DRZ's there great , I've been riding for 50 years now and the DRZ are sliding fools . " If you ain't sliding you ain't riding " >
@AussieR1 8 жыл бұрын
good to see someone watched it :)
@keggz1882 8 жыл бұрын
Thanks a lot! Got this for Christmas. Helped me install
@AussieR1 8 жыл бұрын
excellent!
@HamSpamJamLamb 9 жыл бұрын
DAT SOUND!! And nice wheelie!
@AussieR1 9 жыл бұрын
***** I'm pretty sure it has matured like a fine wine over time. :)
@eamonmurphy1154 7 жыл бұрын
Yea maybe my stock sm is just really quiet man. Cheers anyway for the quick response love ur vids. And the amount of my friends that get 3 month licence losses and 30 day impounds is crazy, all because of wheelies haha
@AussieR1 8 жыл бұрын
So after ages, it has started leaking at the join. I'm going to try some high temperature silicon to sort it.
@JustTex 9 жыл бұрын
I like the look of ya toolbox , very cool.
@AussieR1 9 жыл бұрын
MX Tex 🚲 Bunnings special. $400 :D
@MrEnduroVlogs 6 жыл бұрын
Was that with the baffle in
@annagurtyakova8134 8 жыл бұрын
Thanks for your video, from Russia with love)
@AussieR1 8 жыл бұрын
no problem :)
@AussieR1 8 жыл бұрын
no problem :)
@Kaegis 8 ай бұрын
Did you re-jet the carbie and open the airbox? How did you find the torque difference with the pipe?
@qwerty12345zxc 8 жыл бұрын
Beautifoul SOUND i must have it !!! I have DRZ 400S . I would bay FMF POWERCORE 4 all complet with Power Bomb . Nice bike ;)
@AussieR1 8 жыл бұрын
it seems the S needs the header pipe but the E doesn't gain anything from it. good choice!
@jpyka4x4 8 жыл бұрын
That toolbox is sweet
@AussieR1 8 жыл бұрын
cheers mate :)
@lucascastro7999 8 жыл бұрын
did you have to rejet it? because you changed the pipe
@AussieR1 8 жыл бұрын
+Lucas Castro I read that a lot of people do. I didn't and it ran perfect.
@MillAreo 8 жыл бұрын
Hey! how has the seal held up since you didn't use any silicone?
@AussieR1 8 жыл бұрын
it leaked after a month. I ripped it apart and used some standard exhaust sealant. no leaks since then!
@MillAreo 8 жыл бұрын
Roger that. I just installed this pipe on my 2015 drz400sm. just did a quick rider back and forth down the street and the amount of popping on decal was surprising. Have you have popping issues before the exhaust leak became apparent? AAAAAnd, have there been popping issues since you sealed it properly? Mind you - has not been rejected nor 3x3 mod.
@AussieR1 8 жыл бұрын
+_Bubba_Fett mine only does when it's cold or riding really hard. 98ron fuel does it too. it seems my drz rathers 95.
@dan3428 6 жыл бұрын
Damn I wish my stock exhaust sounded like that. The s and sm models sound gross stock
@eamonmurphy1154 7 жыл бұрын
do you have any baffles in it because i find mine is so load
@AussieR1 7 жыл бұрын
Eamon Murphy compared to stock it is loud. The mic didn't really capture how loud it is.
@AussieR1 7 жыл бұрын
Eamon Murphy compared to stock it is loud. The mic didn't really capture how loud it is.
@eamonmurphy1154 7 жыл бұрын
do u use a heat shield at all?
@AussieR1 7 жыл бұрын
Eamon Murphy only the stock heat shielding under the white plastic.
@DeLtA6911 4 жыл бұрын
Where can I get those mirrors
@AussieR1 4 жыл бұрын
They are blind spot mirrors that you usually stick to a car mirror. I drilled 2 small holes in them and zip-tied them on. Double-check the mirror law in your state; QLD only required a mirror on each side; other states have size requirements.
@shannonhartnett 3 жыл бұрын
Stock with baffle out sounds just as good 😆 not wasting my money on just the weight difference that's basically all Your paying for in this case with the fmf brand
@samuellamont3971 8 жыл бұрын
thought it wood have the power bomb on there
@AussieR1 8 жыл бұрын
+Samuel Lamont Apparently it makes fk all difference to a E pipe. :-/
@samuellamont3971 8 жыл бұрын
ok wounder if it did mate
Cross Training Adventure
Рет қаралды 66 М.